PARADOX 8388765517486

Paradox IP150 interneto modulio vartotojo vadovas

Model: IP150 (Part Number: 8388765517486)

Prekės ženklas: PARADOX

1. Įvadas

The Paradox IP150 Internet Module is a sophisticated device designed to integrate Paradox security systems with internet connectivity. This module enables remote monitoring, control, and reporting capabilities for compatible alarm panels such as Magellan, Spectra, and Digiplex EVO series. By connecting your alarm system to the internet, the IP150 facilitates enhanced security management and accessibility.

2. Sąranka ir diegimas

Proper installation of the IP150 module is crucial for its optimal performance. It is recommended that installation be performed by a qualified security professional.

2.1. Komponento identifikavimas

Paradox IP150 Internet Module showing LAN port, LED indicators, and panel connection.

Figure 1: Paradox IP150 Internet Module Overview
This image displays the Paradox IP150 Internet Module. On the left, a LAN port is visible for network connection. The center features LED indicators labeled 'USER', 'INTERNET', and 'LINK' (with 10-Yellow and 100-Green speed indications), along with 'RX/TX' for data transmission. On the right, connections for the alarm panel are marked 'PANEL' with I/O 1, C, and I/O 2 terminals, and a 'SERIAL OUT' port.

2.2. Prijungimo žingsniai

  1. Connect to Alarm Panel: Connect the IP150 module to the designated communication port on your compatible Paradox alarm panel (e.g., Magellan, Spectra, Digiplex EVO) using the provided cable. Ensure the connection to the "PANEL" and "SERIAL OUT" terminals is secure.
  2. Tinklo prisijungimas: Plug a standard Ethernet cable into the "LAN" port on the IP150 module and connect the other end to your network router or switch.
  3. Įjungimas: Ensure the alarm panel is powered on. The IP150 module draws power directly from the panel.
  4. Pradinė konfigūracija: Access the module's configuration interface via a web browser or Paradox's dedicated software (e.g., BabyWare, IP Explorer) to set up network parameters, port forwarding (if required), and connect to Paradox's Swan server for remote access. Refer to the specific software manual for detailed configuration steps.

3. Operating the IP150 Module

Once installed and configured, the IP150 module operates largely autonomously, providing a bridge between your alarm system and the internet. Its primary function is to facilitate communication for remote monitoring and control.

3.1. LED indikatoriai

The IP150 module features several LED indicators that provide visual feedback on its operational status:

3.2. Nuotolinė prieiga ir stebėjimas

The IP150 allows for remote access to your alarm system via Paradox's Insite GOLD mobile application or PC-based software. This enables you to:

Ensure your internet connection is stable for reliable remote operation.

4. Priežiūra

The Paradox IP150 Internet Module is designed for low maintenance. Regular checks should focus on ensuring stable network connectivity and proper operation of the alarm system it is connected to.

5. Problemų sprendimas

If you encounter issues with your IP150 module, refer to the following common problems and solutions:

ProblemaGalima priežastisSprendimas
INTERNET LED is off or flashing irregularly.No internet connection, network issue, or incorrect configuration.
  • Check your router and internet service.
  • Patikrinkite Ethernet kabelio jungtį.
  • Ensure correct network settings (IP address, gateway, DNS) in the module's configuration.
  • Power cycle the router and the alarm panel.
LINK LED is off.No physical network link.
  • Ensure the Ethernet cable is securely plugged into both the IP150 and the router/switch.
  • Išbandykite kitą Ethernet kabelį.
  • Check the port on your router/switch.
Cannot access module remotely.Internet connection issue, port forwarding not configured, or Swan server issue.
  • Verify INTERNET LED is solid.
  • Confirm port forwarding rules are correctly set up on your router (if not using Swan server).
  • Check Paradox's Swan server status.
  • Ensure the module's firmware is up to date.
Module not recognized by alarm panel.Incorrect wiring or panel compatibility issue.
  • Re-check the wiring between the IP150 and the alarm panel.
  • Ensure your alarm panel model is compatible with the IP150.
  • Consult the alarm panel's installation manual for communication module setup.

If problems persist, contact Paradox technical support or your authorized installer.

6. Specifikacijos

7. Informacija apie garantiją

For detailed warranty information regarding the Paradox IP150 Internet Module, please refer to the warranty card included with your product packaging or visit the official Paradox Security Systems websvetainėje. Garantijos sąlygos gali skirtis priklausomai nuo regiono ir mažmenininko.

8. Techninė pagalba

If you require technical assistance or have questions not covered in this manual, please contact your authorized Paradox dealer or installer. You can also visit the official Paradox Security Systems websvetainė, kurioje rasite pagalbos išteklių, DUK ir kontaktinės informacijos.

Paradox Official Websvetainė: www.paradox.com

Susiję dokumentai - 8388765517486

Preview Paradox IP150+ Internet Module Installation Manual
Installation guide for the Paradox IP150+ Internet Module, detailing its connection, configuration, IP reporting, remote access, and technical specifications for integration with Paradox alarm systems.
Preview „Paradox ZX82“ 8 zonų įėjimų išplėtimo modulio įrengimo vadovas
Šiame įrengimo vadove pateikiama išsami informacija apie „Paradox ZX82“ 8 zonų įėjimų išplėtimo modulį, apimančią jo funkcijas, suderinamumą su „Paradox“ valdymo centralėmis, prijungimo procedūras, EVO ir MG/SP sistemų programavimo instrukcijas, LED indikatorių funkcijas, technines specifikacijas ir programinės įrangos atnaujinimo informaciją.
Preview „Paradox RPT1+“ belaidžio kartotuvo modulio įrengimo vadovas
„Paradox RPT1+“ belaidžio kartotuvo modulio įrengimo vadovas, kuriame išsamiai aprašomos jo savybės, įrengimo žingsniai ir programavimo informacija, skirta „Magellan“ ir „Spectra SP“ signalizacijos sistemoms tobulinti.
Preview „Paradox RPT1+“ belaidžio kartotuvo modulio įrengimo vadovas
„Paradox RPT1+“ belaidžio kartotuvo modulio įrengimo vadovas, kuriame pateikiamos išsamios instrukcijos, kaip nustatyti, programuoti, naudoti LED indikatorius ir techninės specifikacijos, skirtos „Magellan“ ir „Spectra SP“ apsaugos sistemoms patobulinti.
Preview „Paradox Magellan“ ir „Spectra SP“ naudotojo vadovas
Išsamus „Paradox Magellan“ ir „Spectra SP“ signalizacijos sistemų naudotojo vadovas, kuriame aprašomas sąranka, veikimas, tokios funkcijos kaip „StayD“, nuotolinio valdymo pultai, ryšio parinktys ir trikčių šalinimas.
Preview „Paradox IP180“ interneto modulio įrengimo vadovas
Šiame vadove pateikiamos išsamios „Paradox IP180“ interneto modulio diegimo ir konfigūravimo instrukcijos, įskaitant „Paradox“ apsaugos sistemų prijungimą, programavimą ir trikčių šalinimą.