IMPINJ Speedway Revolution R420 UHF RFID Reader - 4 Port User Manual

Įvadas

This manual provides essential instructions for the setup, operation, maintenance, and troubleshooting of the IMPINJ Speedway Revolution R420 UHF RFID Reader. Please read this document thoroughly before using the device to ensure proper functionality and safety.

1 paveikslas: IMPINJ Speedway Revolution R420 UHF RFID Reader. This image displays the top-down view of the RFID reader, highlighting its compact design and various ports.

Sąrankos instrukcijos

Follow these steps to properly set up your Speedway Revolution R420 RFID Reader.

1. Maitinimo prijungimas

The R420 reader supports Power over Ethernet (PoE) or an external 24V, 1.0A power supply. Ensure you use the appropriate power source.

• POE: Connect an Ethernet cable from a PoE-enabled switch or injector to the Ethernet port on the reader.
• Išorinė galia: If PoE is not used, connect a compatible 24V, 1.0A power adapter to the '+24V === 1.0A' power input port.

2. Tinklo ryšys

Connect the reader to your network using a standard Ethernet cable. The Ethernet port is an RJ45 type.

3. Antenos jungtis

The R420 features four antenna ports (ANT 1, ANT 2, ANT 3, ANT 4). Connect your UHF RFID antennas to these ports. Ensure secure connections for optimal performance.

4. Periferinės jungtys

• USB priegloba: Skirta USB periferiniams įrenginiams prijungti.
• USB įrenginys: For connecting the reader to a host computer.
• Konsolė: For serial communication and configuration.
• GPIO: General Purpose Input/Output for external device control and sensing.

2 paveikslas: Labeled diagram of the IMPINJ Speedway Revolution R420 ports. This image clearly indicates the location of the Power LED, Status LED, Antenna ports (ANT 1-4), Power Supply input, Ethernet port, USB Device port, USB Host port, Console port, and GPIO port.

3 paveikslas: Galinis view of the IMPINJ Speedway Revolution R420 showing the power input, Ethernet, USB, Console, and GPIO ports. This image provides a detailed look at the connectivity options on one side of the reader.

4 paveikslas: Priekyje view of the IMPINJ Speedway Revolution R420 displaying the four antenna ports. This image highlights the antenna connectivity side of the device.

Naudojimo instrukcijos

The IMPINJ Speedway Revolution R420 is a high-performance UHF RFID reader designed for various applications.

1. Įjunkite maitinimą

Once all connections are secure, apply power to the reader. The GALIA LED indicator will illuminate, and the STATUSAS LED will indicate the operational state.

2. Programinės įrangos konfigūracija

The reader requires software configuration for specific RFID tag reading operations. This typically involves using Impinj's reader management software or integrating with custom applications via its API. An easy-to-use API is available for C# applications, allowing for custom business logic implementation.

3. Paraiškos

The R420 is suitable for a wide range of applications, including:

• Atsargų valdymas
• Turto stebėjimas
• Tiekimo grandinės valdymas
• Retail Operations
• Manufacturing Processes
• Healthcare Systems
• Logistika

With proper antenna configuration, the reader can detect standard UHF tags at ranges of 30-50 feet.

Priežiūra

To ensure the longevity and optimal performance of your IMPINJ Speedway Revolution R420 reader, follow these general maintenance guidelines:

• Valymas: Keep the device clean and free from dust and debris. Use a soft, dry cloth for cleaning. Avoid liquid cleaners that could damage internal components.
• Aplinkos sąlygos: Operate the reader within its specified environmental conditions (temperature, humidity) to prevent damage.
• Ryšio patikrinimai: Periodically inspect all cable connections (power, Ethernet, antennas, USB, console, GPIO) to ensure they are secure and free from damage.
• Firmware atnaujinimai: Patikrinkite gamintojo website for any available firmware updates. Keeping the firmware up-to-date can improve performance and add new features.

Trikčių šalinimas

If you encounter issues with your Speedway Revolution R420, consider the following troubleshooting steps:

• Nėra galios: Verify that the power supply is correctly connected and providing the specified voltage (24V, 1.0A) or that the PoE source is active. Check the GALIA LED indikatorius.
• Nėra tinklo ryšio: Ensure the Ethernet cable is securely connected to both the reader and the network switch/router. Check network settings and IP configuration.
• Unable to Read Tags:
  • Confirm antennas are properly connected to all four ports.
  • Verify antenna cables are not damaged.
  • Check software configuration for antenna power levels and read settings.
  • Užtikrinti tags are within the read range and orientation.
• Status LED Issues: Refer to the Impinj documentation for specific STATUSAS LED patterns and their meanings to diagnose operational issues.
• Software Communication Problems: Ensure the correct drivers are installed for USB or console connections. Verify network settings for Ethernet communication.

For advanced troubleshooting or persistent issues, consult the official Impinj documentation or contact technical support.

Specifikacijos

Informacija apie garantiją

The IMPINJ Speedway Revolution R420 RFID Reader is sold as a brand new unit and comes with a full manufacturer's warranty. For specific terms and conditions of the warranty, please refer to the official Impinj warranty documentation or contact Impinj directly.

Palaikymas ir kontaktai

For technical assistance, product inquiries, or to explore the full line of Impinj products, please contact your authorized Impinj reseller or visit the official Impinj website. If you purchased this product from a reseller and require support, please reach out to them directly for assistance.