1. Įvadas
This manual provides detailed instructions for the installation, operation, and maintenance of your PROFLO PF9412FLPK Residential Toilet Manual Flush Valve. Designed for residential toilet systems, this flush valve ensures efficient and reliable water flow for proper flushing. Please read this manual thoroughly before beginning installation or use to ensure correct setup and optimal performance.
Figure 1: PROFLO PF9412FLPK Residential Toilet Manual Flush Valve.
2. Saugos informacija
Montuodami arba aptarnaudami santechnikos įrenginius, visada laikykitės pagrindinių saugos priemonių. Nesilaikant šių nurodymų, galite sugadinti turtą arba susižaloti.
- Turn off the main water supply to the toilet before beginning any work.
- Dėvėkite tinkamas asmenines apsaugos priemones, tokias kaip pirštinės ir akių apsauga.
- Įsitikinkite, kad visos jungtys yra tvirtos, kad išvengtumėte nuotėkio.
- Jei abejojate dėl kurio nors žingsnio, kreipkitės į kvalifikuotą santechniką.
- Šiame produkte yra cheminių medžiagų, kurios, kaip žinoma Kalifornijos valstijoje, sukelia vėžį, apsigimimus ar kitokią reprodukcinę žalą (65 pasiūlymo įspėjimas).
3. Pakuotės turinys
Prieš pradėdami montuoti, patikrinkite, ar yra visi komponentai.
- PROFLO PF9412FLPK Residential Toilet Manual Flush Valve (1 unit)
- Associated installation hardware (gaskets, nuts, etc.)
2 pav. Pvzample of flush valve components.
4. Sąranka ir diegimas
Follow these steps for proper installation of the PROFLO PF9412FLPK flush valve. This valve is designed for easy replacement in compatible PROFLO toilet tanks.
- Paruoškite tualetą: Turn off the water supply to the toilet at the shut-off valve. Flush the toilet to empty the tank. Use a sponge to remove any remaining water from the tank.
- Seno užpildymo vožtuvo nuėmimas: Disconnect the water supply line from the bottom of the old fill valve. Unscrew the mounting nut from the underside of the tank and remove the old fill valve.
- Įdiekite naują užpildymo vožtuvą: Insert the new PROFLO PF9412FLPK flush valve into the hole at the bottom of the toilet tank. Ensure the rubber washer is correctly seated on the outside of the tank. Secure the valve with the mounting nut from underneath the tank, tightening it hand-tight plus a quarter turn with a wrench. Do not overtighten.
- Prijunkite papildymo vamzdelį: Attach the refill tube from the fill valve to the overflow pipe of the flush valve. Ensure it is securely placed to direct water into the overflow pipe during tank refill.
- Prijunkite vandens tiekimą: Reconnect the water supply line to the bottom of the new fill valve. Hand-tighten, then use a wrench for a final snug turn.
- Atkurti vandens tiekimą: Slowly turn on the water supply to the toilet. Check for any leaks around the connections. Allow the tank to fill.
- Vandens lygio reguliavimas: The water level should be approximately 1 inch below the top of the overflow pipe. Adjust the fill valve as necessary to achieve the correct water level.
Note: Some users have reported initial difficulty with adjustment or potential leaks if not installed correctly. Ensure all components are properly seated and tightened.
5. Operacija
The PROFLO PF9412FLPK is a manual flush valve designed for straightforward operation.
- Skalavimas: Press down the toilet handle firmly. This action lifts the flapper, allowing water from the tank to flow into the toilet bowl, initiating the flush cycle.
- Užpildymas: Once the tank is empty, the flapper will close, and the fill valve will automatically begin refilling the tank to the preset water level. The refill tube directs a small amount of water into the bowl to replenish the trap seal.
Video 1: Demonstration of the PROFLO PF9412FLPK flush valve in operation, showing the flushing and refilling process within a toilet tank.
6. Priežiūra
Regular maintenance helps ensure the longevity and efficient operation of your flush valve.
- Valymas: Periodically inspect the flush valve for mineral buildup or debris. Clean with a soft brush and mild detergent if necessary. Avoid harsh chemicals that could damage components.
- Patikra: Check the flapper and seals for wear or damage. A worn flapper can cause leaks and continuous running water. Replace components as needed.
- Vandens lygis: Ensure the water level remains at the recommended height (approximately 1 inch below the overflow pipe). Adjust the fill valve if the water level is too high or too low.
7. Problemų sprendimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Tualetas veikia nuolat | Worn flapper, improper water level, debris under flapper. | Inspect and clean flapper. Adjust water level. Replace flapper if worn. |
| Silpnas arba nepilnas praplovimas | Low water level, clogged rim jets, flapper closing too quickly. | Adjust water level higher. Clean rim jets. Ensure flapper chain has proper slack. |
| Vanduo teka iš rezervuaro pagrindo | Loose mounting nut, damaged gasket, cracked tank. | Tighten mounting nut (do not overtighten). Inspect and replace gasket. If tank is cracked, professional repair or replacement is needed. |
| Fill valve not filling tank | Water supply off, clogged fill valve, float mechanism stuck. | Check water supply. Clean or replace fill valve. Ensure float moves freely. |
8. Specifikacijos
- Modelio numeris: PF9412FLPK
- Prekinis ženklas: PROFLO
- Medžiaga: Žalvaris
- Įleidimo jungties tipas: Barb
- Išvado jungties tipas: Barb
- Uostų skaičius: 2
- Išleidimo angos dydis: 2 colių
- Prekės svoris: 6.9 uncijos
- Pakuotės matmenys: 17.8 x 4.25 x 4.25 colio
- UPC: 781889183038
9. Garantija ir palaikymas
The PROFLO PF9412FLPK Residential Toilet Manual Flush Valve is covered under PROFLO's limited warranty. For specific warranty details, please refer to the documentation included with your purchase or visit the official PROFLO websvetainę.
For technical assistance or customer support, please contact PROFLO Customer Service:
- Telefono numeris: 800-221-3379
- Websvetainė: Apsilankykite PROFLO parduotuvėje „Amazon“ svetainėje
