1. Įvadas
This manual provides essential information for the proper installation, operation, and maintenance of your Kidde i9040 Battery-Operated Ionization Smoke Alarm. Please read it thoroughly before installation and retain it for future reference. This device is designed to detect smoke and alert occupants to potential fire hazards.
2. Svarbi saugos informacija
- This smoke alarm is designed for residential use only.
- Do not paint the smoke alarm. Paint can clog the sensing chamber and prevent the alarm from operating correctly.
- Kas savaitę patikrinkite dūmų detektorių, kad įsitikintumėte, jog jis veikia tinkamai.
- Kai tik pasigirsta įspėjimas apie išsikrovusį akumuliatorių, nedelsdami pakeiskite akumuliatorių.
- Niekada neignoruokite dūmų detektoriaus. Ištirkite priežastį ir imkitės atitinkamų veiksmų.
- This alarm is not intended to replace proper fire safety practices, including regular fire drills and escape plans.
3. Produktas baigtasview
The Kidde i9040 is a compact, battery-operated ionization smoke alarm. Ionization smoke alarms are generally more effective at detecting fast-flaming fires.
1 pav.: priekis view of the Kidde i9040 smoke alarm, showing the test button and alarm grille. The text "PUSH AND HOLD TO TEST WEEKLY" and "DO NOT PAINT" are visible.
Key features include a test/hush button, a loud alarm, and a battery compartment for easy replacement.
2 pav.: galinis view of the Kidde i9040 smoke alarm with the mounting bracket and battery compartment visible. A 9V battery is shown installed, along with mounting hardware.
4. Sąranka ir diegimas
4.1 Vietos pasirinkimas
For optimal protection, install smoke alarms in every sleeping room and on every level of your home, including the basement.
Figure 3: Recommended placement diagram for smoke alarms, heat alarms, carbon monoxide alarms, and fire extinguishers within a typical home structure. Ionization smoke alarms are indicated by red dots.
4.2 Montavimo instrukcijos
- Twist the mounting bracket counter-clockwise to separate it from the alarm unit.
- Position the mounting bracket on the ceiling or wall at your chosen location. Mark the two mounting holes.
- Drill two 3/16 inch (5 mm) holes at the marked locations. Insert the plastic screw anchors (if applicable).
- Pritvirtinkite tvirtinimo laikiklį naudodami pateiktus varžtus.
- Install the 9V battery into the battery compartment. Ensure correct polarity (+ to + and - to -).
- Align the alarm unit with the mounting bracket and twist clockwise until it locks into place.
- Išbandykite signalizaciją iš karto po įrengimo.
Figure 4: A standard 9V battery, required for operation of the Kidde i9040 smoke alarm.
5. Naudojimo instrukcijos
5.1 Normalus veikimas
The smoke alarm is continuously monitoring for smoke. A red LED indicator will flash approximately once every 30-40 seconds to confirm it is operating correctly.
5.2 Signalizacijos testavimas
Press and hold the test button on the front cover for a few seconds. The alarm will sound a loud, pulsating horn. Release the button to stop the alarm. Test weekly.
5.3 Aliarmo būsena
When smoke is detected, the alarm will sound a loud, pulsating horn. The red LED will flash rapidly.
5.4 Nutildymo funkcija
If a nuisance alarm occurs (e.g., from cooking fumes), press the test/hush button. This will silence the alarm for approximately 7-10 minutes. The red LED will flash every 10 seconds during the hush period. The alarm will automatically reset after the hush period, or sooner if smoke density increases.
6. Priežiūra
6.1 Akumuliatoriaus keitimas
The smoke alarm requires one 9V battery. When the battery is low, the alarm will "chirp" approximately once every 30-40 seconds. Replace the battery immediately.
- Pasukite žadintuvą prieš laikrodžio rodyklę, kad jį nuimtumėte nuo tvirtinimo laikiklio.
- Atidarykite akumuliatoriaus skyrių.
- Išimkite seną bateriją ir tinkamai išmeskite.
- Install a new 9V battery, ensuring correct polarity.
- Close the battery compartment and re-attach the alarm to the mounting bracket.
- Patikrinkite signalizaciją pakeitę bateriją.
6.2 Signalizacijos valymas
Valykite dūmų detektorių bent kartą per mėnesį.
- Nuimkite signalizaciją nuo tvirtinimo kronšteino.
- Use a soft brush attachment on your vacuum cleaner to remove dust and debris from the alarm's cover and vents.
- Nenaudokite vandens, valiklių ar tirpiklių, nes jie gali pažeisti įrenginį.
- Re-install the alarm and test it.
7. Problemų sprendimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Signalizacija suskamba kas 30-40 sekundžių | Senka baterija | Pakeiskite 9 V akumuliatorių. |
| Signalizacija skamba dažnai be dūmų | Nuisance alarm (cooking fumes, steam), dust in sensing chamber, improper placement. | Use hush feature. Clean the alarm. Relocate if consistently triggered by non-fire sources. |
| Bandymo metu neskamba aliarmas | Dead or improperly installed battery, faulty unit. | Check battery installation and replace if necessary. If problem persists, replace the alarm. |
| Raudonas šviesos diodas nemirksi | No power, faulty unit. | Check battery. Replace alarm if LED still does not flash. |
8. Specifikacijos
- Modelis: Kidde i9040
- Jutiklio tipas: Jonizacija
- Maitinimo šaltinis: 9V Battery (1 required)
- Signalo garsumas: 85 dB 10 pėdų atstumu
- Darbinė temperatūra: 40 °F (4.4 °C) iki 100 °F (37.8 °C)
- Darbinė drėgmė: 10% - 95% relative humidity, non-condensing
- Matmenys: Approximately 4.2 x 4.2 x 3.2 inches (package dimensions, actual unit is slightly smaller)
- Svoris: Approximately 8 ounces (with battery)
- UPC: 635231841780
9. Garantija ir palaikymas
For warranty information or technical support, please refer to the contact information provided on the product packaging or visit the official Kidde websvetainėje. Išsaugokite pirkimo kvitą kaip pirkimo įrodymą.
Gamintojas: Kidde
Websvetainė: www.kidde.com
