Arrow Fastener GT31LI

Arrow GT31LI 30-Watt Cordless Hot Melt Mini Glue Gun Instruction Manual

Model: GT31LI | Brand: Arrow Fastener

1. Baigėsiview

The Arrow GT31LI 30-Watt Cordless Hot Melt Mini Glue Gun is designed for a variety of crafting, DIY, and repair projects. Featuring a lithium-ion battery, it provides up to 100 minutes of continuous use on a single charge. The glue gun heats up rapidly, typically within one minute, allowing for quick project starts. Its compact and lightweight design ensures ease of handling and portability.

Arrow GT31LI 30-Watt Cordless Hot Melt Mini Glue Gun

Figure 1: The Arrow GT31LI 30-Watt Cordless Hot Melt Mini Glue Gun, showcasindėl savo kompaktiško dizaino ir raudonos/juodos spalvų schemos.

2. Saugos instrukcijos

3. Įtraukti komponentai

4. Sąranka

  1. Pradinis mokestis: Before first use, fully charge the glue gun's integrated lithium-ion battery using the provided USB charging cable and a compatible 5V output adapter. The charging indicator light will show charging status.
  2. Įdėkite klijų lazdelę: Insert a 5/16-inch diameter mini glue stick into the loading chamber at the rear of the glue gun. Push it gently until it stops.

5. Naudojimo instrukcijos

  1. Maitinimas: Press and hold the power button (usually located near the handle) for a few seconds until the indicator light illuminates.
  2. Šildymas: The glue gun will begin to heat up. The indicator light may change color or blink to show it's heating. It typically reaches operating temperature within one minute.
  3. Klijų užtepimas: Once the glue gun is heated and the indicator light signals readiness (e.g., solid green), gently squeeze the trigger to dispense melted glue. Apply glue to the desired surface.
  4. Automatinis išsijungimas: If the glue gun is left idle for approximately five minutes, it will automatically power off to prevent overheating and save battery. To resume operation, simply press the power button again.
  5. Išjungti: To manually turn off the glue gun, press and hold the power button until the indicator light turns off.

6. Priežiūra

7. Problemų sprendimas

ProblemaGalima priežastisSprendimas
Klijų pistoletas neįkaista.Baterija išsikrovusi arba jos įkrova maža.Charge the battery fully using the provided USB cable and a 5V adapter.
Glue is not dispensing.Glue stick is not fully inserted or is the wrong size.Ensure a 5/16-inch glue stick is fully inserted. Allow adequate heating time.
Glue gun shuts off unexpectedly.Auto shut-off feature activated due to inactivity.Press the power button to turn it back on.

8. Specifikacijos

9. Garantija ir palaikymas

For warranty information or technical support, please refer to the documentation included with your product or visit the official Arrow Fastener websvetainę. Išsaugokite pirkimo čekį garantiniams reikalavimams.