„Everbilt“ 1/2 AG panardinamasis siurblinis siurblys

1. Produktas baigtasview

The Everbilt 1/2 HP Submersible Sump Pump (Model SP05002VD) is designed for efficient water removal in residential sump applications. Constructed with a durable stainless steel motor housing and a rugged cast iron volute and seal plate, this pump ensures long-lasting performance. It features an oil-filled, high-efficiency PSC motor with permanent lubricated ball bearings for quiet, maintenance-free operation. The innovative reed sensor vertical float switch provides reliable automatic activation, and its top suction design helps filter debris and minimizes clogging.

Figure 1: Everbilt 1/2 HP Submersible Sump Pump. This image shows the black submersible pump unit with its integrated float switch and discharge port.

2. Svarbi saugos informacija

Read all instructions carefully before installation and operation. Failure to follow these instructions can result in serious injury or property damage. Keep this manual for future reference.

• Prieš atlikdami siurblio techninę priežiūrą, visada atjunkite maitinimą.
• Įsitikinkite, kad siurblys yra tinkamai įžemintas, kad išvengtumėte elektros smūgio.
• Do not operate the pump in areas containing flammable liquids or gases.
• Siurblio veikimo metu rankas ir kojas laikykite atokiai nuo jo įsiurbimo ir išleidimo angų.
• This pump is designed for water only. Do not use for chemicals or other liquids.

3. Sąranka ir diegimas

Proper installation is crucial for the efficient and safe operation of your sump pump.

1. Siurbimo duobės paruošimas: Ensure the sump pit is clean and free of debris. The pit should be large enough to accommodate the pump and allow for proper float switch movement.
2. Siurblio padėties nustatymas: Place the pump on a solid, level surface at the bottom of the sump pit. The top suction design helps filter debris and minimizes clogging, but ensure the intake is clear.
3. Išleidimo vamzdžio jungtis: Connect a discharge pipe (not included) to the pump's discharge port. Use appropriate fittings and sealants to ensure a watertight connection. A check valve is recommended to prevent backflow.
4. Plūdinio jungiklio reguliavimas: The innovative reed sensor vertical float switch is pre-set for optimal operation. Ensure the float can move freely without obstruction within the sump pit. The pump will activate when the water level rises and lifts the float.
5. Maitinimo jungtis: Connect the pump to a dedicated, grounded 120V AC electrical outlet. Do not use extension cords.
6. Testavimas: Once installed, fill the sump pit with water to test the pump's operation. Verify that the pump activates, removes water, and shuts off automatically when the water level drops.

4. Naudojimo instrukcijos

The Everbilt 1/2 HP Submersible Sump Pump operates automatically once properly installed and connected to power.

• The pump is designed to activate when the water level in the sump pit rises, lifting the vertical float switch.
• It will continue to pump water until the water level drops sufficiently, allowing the float switch to return to its off position.
• The oil-filled, high-efficiency PSC motor and permanent lubricated ball bearings ensure quiet and reliable performance.
• Regularly inspect the sump pit and pump for any obstructions or unusual operation.

5. Priežiūra

While the Everbilt sump pump is designed for low maintenance, periodic checks are recommended to ensure optimal performance and longevity.

• Mėnesinė apžiūra:
  • Disconnect power to the pump before inspection.
  • Remove any debris from the sump pit that could obstruct the pump's intake or float switch.
  • Check the float switch for free movement. Ensure it is not tangled or stuck.
  • Patikrinkite, ar maitinimo laidas nėra pažeistas.
  • Briefly reconnect power and test the pump by pouring water into the pit to ensure it cycles on and off correctly.
• Kasmetinis valymas:
  • Disconnect power and remove the pump from the sump pit.
  • Clean the pump's exterior and intake screen to remove any accumulated sediment or debris.
  • Inspect the discharge pipe and check valve for any blockages or leaks.
• Tepimas: The pump features permanent lubricated ball bearings and does not require additional lubrication.

6. Trikčių šalinimo vadovas

Dažniausiai pasitaikančias problemas ir jų sprendimus rasite šiame vadove.

7. Gaminio specifikacijos

8. Garantija ir palaikymas

Specific warranty details for the Everbilt 1/2 HP Submersible Sump Pump (Model SP05002VD) are not provided in this manual. For warranty information, technical support, or to inquire about replacement parts, please contact Everbilt customer service directly or refer to the official Everbilt websvetainėje. Išsaugokite pirkimo kvitą kaip pirkimo įrodymą.

Gamintojas: EVERBILT