Everbilt UT00801

Everbilt 1/6 HP Submersible Utility Pump Instruction Manual

1. Įvadas

The Everbilt 1/6 HP Submersible Utility Pump (Model UT00801) is engineered for efficient water removal from various locations. This pump is ideal for draining sinks, tubs, and shallow flooded areas such as basements, floors, and flat roofs. Its submersible design allows it to operate directly in water, effectively reducing water levels down to 1/8 inch.

This manual provides essential information for the safe and effective use of your Everbilt utility pump. Please read all instructions carefully before installation and operation.

Everbilt 1/6 HP Submersible Utility Pump

1 paveikslas: Everbilt 1/6 HP Submersible Utility Pump. This image displays the main unit of the pump, highlighting its compact, black plastic housing, the threaded discharge port, and the power cord connection point. A separate threaded adapter is also visible.

2. Saugos informacija

Always prioritize safety when operating electrical equipment, especially near water. Failure to follow these safety guidelines can result in electric shock, fire, personal injury, or property damage.

  • Elektros sauga: Ensure the pump is connected to a properly grounded outlet. Do not use extension cords unless absolutely necessary and ensure they are rated for outdoor use and wet conditions. Never operate the pump with damaged cords or plugs.
  • Tik panardinamam naudojimui: This pump is designed for submersible operation. Do not run the pump dry, as this can cause severe damage to the motor.
  • Vandens temperatūra: Do not use this pump with water temperatures exceeding 104°F (40°C).
  • Degūs skysčiai: Never pump flammable or corrosive liquids. This pump is intended for water only.
  • Vaikai ir augintiniai: Keep children and pets away from the pump and any standing water during operation.
  • Priežiūra: Always disconnect power before performing any maintenance or cleaning on the pump.

3. Pakuotės turinys

Išpakuodami patikrinkite, ar yra visi komponentai ir ar jie nepažeisti.

  • Everbilt 1/6 HP Submersible Utility Pump (Model UT00801)
  • Threaded Hose Adapter
  • Instrukcijų vadovas

4. Sąranka

  1. Pritvirtinkite išleidimo žarną: Connect a standard garden hose or a suitable discharge pipe to the pump's threaded outlet. The pump includes a removable adapter to accommodate different hose sizes. Ensure a secure, leak-free connection.
  2. Padėkite siurblį: Place the pump on a stable, level surface in the area to be drained. Ensure the intake screen at the bottom of the pump is clear of debris. The pump must be fully submerged in water for proper operation and cooling.
  3. Route Discharge Hose: Extend the discharge hose to a suitable drainage area, ensuring the water will not flow back into the area being drained. Avoid kinks or sharp bends in the hose that could restrict water flow.
  4. Maitinimo jungtis: Plug the pump's power cord into a grounded 120V AC electrical outlet. The pump will begin operating immediately upon connection to power.

5. Naudojimo instrukcijos

The Everbilt 1/6 HP Submersible Utility Pump is designed for continuous operation once plugged in, provided it remains submerged.

  • Automatinis veikimas: This model operates continuously when plugged in. There is no on/off switch on the unit itself. Operation starts when power is supplied and stops when power is disconnected.
  • Vandens lygis: The pump is capable of removing water down to a minimum level of approximately 1/8 inch. For optimal performance, ensure the pump remains submerged during operation.
  • Stebėjimas: Periodically check the pump's operation and the discharge area to ensure proper water flow and prevent accidental flooding.
  • Atjungimas: Norėdami sustabdyti siurblį, tiesiog atjunkite jį nuo elektros lizdo.

6. Priežiūra

Reguliarus siurblio aptarnavimas užtikrina jo ilgaamžiškumą ir efektyvų veikimą.

  • Cleaning Intake Screen: Regularly inspect and clean the intake screen at the bottom of the pump to prevent blockages from debris, which can reduce pumping efficiency.
  • Saugykla: When not in use, clean the pump thoroughly and store it in a dry, frost-free location. Drain any remaining water from the pump and hose to prevent freezing damage.
  • Patikra: Before each use, inspect the power cord, plug, and pump housing for any signs of damage. Do not use the pump if any damage is observed.

7. Problemų sprendimas

ProblemaGalima priežastisSprendimas
Siurblys neįsijungiaNo power; tripped circuit breaker; damaged cord/plugCheck power supply; reset breaker; inspect and replace damaged components.
Siurblys veikia, bet nepumpuoja vandensIntake screen clogged; air lock; discharge hose kinked/blocked; pump not submergedClean intake screen; prime pump by submerging fully; clear hose; ensure pump is fully submerged.
Sumažintas vandens srautasPartial blockage in intake or hose; low voltageClean intake screen and hose; ensure stable power supply.
Siurblys greitai įsijungia ir išsijungiaInsufficient water level; air in systemEnsure adequate water level for continuous operation; check for air leaks in connections.

If troubleshooting steps do not resolve the issue, contact Everbilt customer support for assistance.

8. Specifikacijos

FunkcijaDetalė
Prekės ženklasEverbiltas
Modelio numerisUT00801
Arklio jėgos1 / 6 HP
Srauto greitisUp to 28 Gallons Per Minute (GPM)
Maksimalus kėlimo aukštis0.13 Inches (Note: This value likely refers to the minimum water level the pump can achieve, not its maximum lift height.)
Minimalus vandens lygis1/8 inch (approx.)
Prekės svoris5.71 svaro
Gaminio matmenys7.68 x 6.89 x 10.63 colio
Maitinimo šaltinisAC/DC (Standard 120V AC for typical use)
MedžiagaPlastikiniai
StiliusPovandeninis

9. Garantija ir palaikymas

The Everbilt 1/6 HP Submersible Utility Pump comes with a 1 metų ribota garantija. For warranty claims, technical support, or replacement parts, please contact Everbilt customer service directly. Keep your purchase receipt as proof of purchase.

For further assistance, refer to the official Everbilt websvetainėje arba susisiekite su jų klientų aptarnavimo linija.

Susiję dokumentai - UT00801

Preview „Everbilt“ panardinamojo siurblio naudojimo ir priežiūros vadovas
Šiame vadove pateikiama esminė informacija apie saugų ir efektyvų „Everbilt“ panardinamųjų siurblių naudojimą ir priežiūrą. Jame aptariamos tokių modelių kaip SP03302VD, SP05002VD, PSSP07501VD ir PSSP10001VD eksploatacinės charakteristikos, saugos priemonės, įrengimo veiksmai, valdymas, priežiūra ir trikčių šalinimas.
Preview Everbilt Submersible Sump Pump Use and Care Guide | SP03302EP, SP05002VD
This comprehensive guide provides essential information for the safe and effective use, care, and maintenance of Everbilt submersible sump pumps, models SP03302EP and SP05002VD. Learn about performance specifications, assembly, operation, troubleshooting, and warranty details.
Preview „Everbilt“ panardinamojo siurblio naudojimo ir priežiūros vadovas (PSSP10001EP, PSSP07501VD)
Šiame vadove pateikiama esminė informacija apie saugų ir efektyvų „Everbilt“ panardinamųjų siurblių, modelių PSSP10001EP ir PSSP07501VD, naudojimą, priežiūrą ir techninę priežiūrą. Jame pateikiamos specifikacijos, surinkimo instrukcijos, naudojimo informacija ir trikčių šalinimo patarimai.
Preview „Everbilt“ panardinamojo siurblio naudojimo ir priežiūros vadovas
Išsamus „Everbilt“ panardinamųjų siurblių (modelių SP03302EP, SP05002VD) naudojimo ir priežiūros vadovas, kuriame aprašomas įrengimas, eksploatavimas, sauga ir trikčių šalinimas.
Preview „Everbilt“ panardinamojo siurblio naudojimo ir priežiūros vadovas | SBA025BC, SBA033BC, SBA033V1, SBA050BC
Išsamus „Everbilt“ panardinamųjų siurblių naudojimo ir priežiūros vadovas, įskaitant SBA025BC, SBA033BC, SBA033V1 ir SBA050BC modelių įrengimą, eksploatavimą, saugos informaciją, priežiūrą ir trikčių šalinimą. Raskite kontaktinę informaciją ir specifikacijas.
Preview „Everbilt“ panardinamojo siurblio naudojimo ir priežiūros vadovas (modelis ECD50V-HDC)
Šiame vadove pateikiama esminė informacija apie saugų „Everbilt“ panardinamojo siurblio, modelio ECD50V-HDC, montavimą, naudojimą, priežiūrą ir trikčių šalinimą. Sužinokite apie saugos atsargumo priemones, našumo specifikacijas ir dažniausiai pasitaikančias problemas, kad užtikrintumėte optimalų siurblio veikimą.