1. Įvadas
This manual provides essential instructions for the installation, operation, maintenance, and troubleshooting of your Intel D875PBZ Motherboard. This product is designed for use with Intel Pentium 4 processors and features the Intel 875P chipset. Please read this manual thoroughly before proceeding with installation.
1 pav. Iš arti view of the Intel D875PBZ model designation on the motherboard.
2. Sąranka ir diegimas
Follow these steps carefully to install your Intel D875PBZ Motherboard and its components.
2.1. Pagrindinės plokštės montavimas
- Paruoškite važiuoklę: Ensure your computer case is compatible with ATX form factor motherboards. Install the I/O plate into the rear opening of the chassis.
- Pritvirtinkite pagrindinę plokštę: Carefully align the motherboard with the standoffs in your chassis. Secure it using appropriate screws. Do not overtighten.
2 pav.: Iš viršaus į apačią view of the Intel D875PBZ motherboard, showing the CPU socket, RAM slots, and expansion slots.
2.2. CPU įrengimas (478 lizdas)
- Atidaryti procesoriaus lizdą: Lift the lever on the Socket 478 CPU socket.
- Įdėkite procesorių: Align the triangular mark on the Intel Pentium 4 CPU with the corresponding mark on the socket. Gently place the CPU into the socket. Do not force it.
- Saugus procesorius: Lower the lever to lock the CPU into place.
- Įdiekite procesoriaus aušintuvą: Note: A CPU cooler is NOT included with this product. Install a compatible Socket 478 CPU cooler (fan and heatsink) according to its manufacturer's instructions. Ensure proper thermal paste application and secure mounting for effective cooling.
2.3. RAM Installation (DDR)
- Open RAM Slot Clips: Open the retention clips at both ends of the DDR RAM slots.
- Insert RAM Modules: Align the notch on the DDR RAM module with the key in the RAM slot. Press down firmly on both ends of the module until the clips snap into place.
2.4. Išorinių įrenginių prijungimas
- Maitinimo jungtys: Connect the 20-pin ATX main power connector and the 4-pin ATX 12V power connector from your power supply to the motherboard.
- Saugojimo įrenginiai: Connect SATA drives to the SATA ports and IDE drives to the IDE connectors on the motherboard.
- Išplėtimo kortelės: Install AGP graphics cards into the AGP slot and other expansion cards (e.g., sound cards, network cards) into the PCI slots.
- Priekinio skydelio jungtys: Connect the power switch, reset switch, HDD LED, and power LED cables from your chassis front panel to the corresponding pins on the motherboard. Refer to the motherboard's silkscreen labels for correct orientation.
- USB and Audio: Connect front panel USB and audio headers if available on your chassis.
3 pav.: galinis view of the Intel D875PBZ motherboard, showing the various input/output ports including PS/2, serial, parallel, USB, Ethernet, and audio jacks.
3. Naudojimo instrukcijos
3.1. Pradinis paleidimas
- Maitinimas: After all components are securely installed and connected, connect your monitor, keyboard, and mouse. Power on your system.
- Prieiga prie BIOS: During the initial boot sequence, press the designated key (commonly DEL, F2, arba F10) to enter the BIOS setup utility. Consult your screen for the exact key prompt.
- BIOS konfigūracija: Configure boot order, date/time, and other system settings as needed. Save changes and exit the BIOS.
3.2. Operacinės sistemos diegimas
Insert your operating system installation media (e.g., CD/DVD) and follow the on-screen prompts to install the operating system. Ensure all necessary drivers for the chipset, audio, and network are installed after the OS installation for optimal performance.
4. Priežiūra
Reguliarus pagrindinės plokštės aptarnavimas užtikrina jos ilgaamžiškumą ir stabilų veikimą.
- Dulkių šalinimas: Periodically open your computer case and use compressed air to remove dust buildup from the motherboard, CPU cooler, and other components. Dust can impede airflow and cause overheating.
- Ryšio patikrinimai: Ensure all power cables, data cables, and expansion cards are securely seated. Loose connections can lead to system instability.
- BIOS Battery: The motherboard uses a CR2032 coin cell battery to retain BIOS settings. If your system consistently loses time or BIOS settings, the battery may need replacement.
5. Problemų sprendimas
Šiame skyriuje aptariamos dažniausiai pasitaikančios problemos, su kuriomis galite susidurti.
- Nėra maitinimo / Nėra POST:
- Verify all power cables (20-pin ATX, 4-pin 12V) are securely connected.
- Ensure the CPU and RAM are correctly installed.
- Check that the power supply is functioning correctly.
- Remove all non-essential components (e.g., extra RAM, expansion cards) and attempt to boot with only the CPU, one RAM stick, and the graphics card.
- Nėra ekrano:
- Ensure the monitor is connected to the graphics card (AGP) and powered on.
- Reseat the graphics card. Try a different graphics card if available.
- Check RAM installation. Faulty or improperly seated RAM can prevent display output.
- Sistemos nestabilumas / gedimai:
- Check CPU and chipset temperatures. Ensure CPU cooler is properly installed and fan is spinning.
- Paleiskite atminties diagnostikos įrankius, kad patikrintumėte, ar nėra sugedusios RAM.
- Įsitikinkite, kad visos tvarkyklės yra atnaujintos.
- Patikrinkite, ar nėra laisvų jungčių arba nepažeistų laidų.
- BIOS atstatymas: To clear CMOS settings, locate the CLR_CMOS jumper on the motherboard (refer to the silkscreen). With the system powered off and unplugged, move the jumper from pins 1-2 to 2-3 for 5-10 seconds, then return it to 1-2. Alternatively, remove the BIOS battery for a few minutes.
6. Specifikacijos
Key technical specifications for the Intel D875PBZ Motherboard:
| Funkcija | Detalė |
|---|---|
| Prekės ženklas | Intel |
| Modelio numeris | D875PBZ |
| CPU lizdas | Lizdas 478 |
| Suderinami procesoriai | Intel Pentium 4 |
| Lustų rinkinio tipas | Intel 875P |
| RAM atminties technologija | DDR |
| Atminties talpa (maks.) | 4 GB |
| Grafikos plokštės sąsaja | AGP, PCI |
| Palaikomas sistemos magistralės standartas | SATA 3 (Note: This refers to the SATA controller, actual speed may vary based on chipset generation) |
| S/PDIF jungties tipas | Optinis |
| Pakuotės matmenys | 14 x 12 x 7 colio |
| Prekės svoris | 4 svaro |
| Pasiekiama pirmoji data | 28 m. gruodžio 2014 d |
7. Informacija apie garantiją
This product is typically covered by a limited warranty provided by the original seller or manufacturer. Please refer to your purchase documentation or contact your retailer for specific warranty terms and conditions. Keep your proof of purchase for warranty claims.
8. Techninė pagalba
For technical assistance, please refer to the official Intel support website or contact your product retailer. Online resources often include updated drivers, FAQs, and community forums that can provide further assistance.
