Azurewave AW-NM386

User Manual: IEEE 802.11b/g/n Wireless LAN USB Module

Brand: Azurewave | Model: AW-NM386

1. Produktas baigtasview

The Azurewave AW-NM386 is an IEEE 802.11b/g/n Wireless LAN USB Module designed for integration into various mobile devices. This includes Personal Digital Assistants (PDAs), Netbooks, TVs, Tablets, and Gaming Devices that require a compact form factor, low power consumption, and support for multiple interfaces and operating systems.

This module facilitates easy implementation of Wi-Fi embedded applications, offering high design flexibility, a short development cycle, and quick time-to-market. It complies with the IEEE 802.11b/g/n standard, utilizing Direct Sequence Spread Spectrum (DSSS), Orthogonal Frequency Division Multiplexing (OFDM), DBPSK, DQPSK, CCK, and QAM baseband modulation technologies.

Pagrindinės funkcijos:

  • Formos faktorius: USB modulis
  • Belaidis standartas: 802.11nbg / Marvell 88W87xx
  • Sąsaja: USB 2.0
  • Temperatūros diapazonas: Extended Temp.
  • Saugumas: Supports WPA/WPA2, WEP 64-bit and 128-bit encryption, IEEE 802.11i security standard (AES/CCMP, WEP with TKIP, AES/CMAC, WAPI).
  • Paslaugos kokybė (QoS): Supports 802.11e for video, voice, and multimedia applications.
Azurewave AW-NM386 IEEE 802.11b/g/n Wireless LAN USB Module

Figure 1: Azurewave AW-NM386 Wireless LAN USB Module. This image shows a green circuit board with a silver metallic shield covering the main chip, labeled 'AW-NM386'. It features a black connector at the top and two circular mounting holes, one on each side. The AzureWave logo and other technical markings are visible on the board.

2. Sąrankos vadovas

This section outlines the general steps for integrating and setting up the AW-NM386 Wireless LAN USB Module. As an embedded component, specific installation procedures may vary depending on the host device.

2.1 Aparatinės įrangos diegimas

  1. Nustatykite ryšio prievadą: Locate the appropriate USB 2.0 interface on your host device (e.g., PDA, Netbook, TV, Tablet, Gaming Device) designed for module integration.
  2. Modulio įdėjimas: Carefully align the AW-NM386 module with the designated USB port. Ensure proper orientation to avoid damage to the module or the host device.
  3. Saugus ryšys: Gently push the module into the port until it is firmly seated. If applicable, secure the module using any provided mounting screws or clips.
  4. Antenos jungtis (jei taikoma): If your host device or module requires an external antenna, connect it to the appropriate antenna connector(s) on the AW-NM386 module.

2.2 Tvarkyklės diegimas

After physical installation, the host device will require the appropriate drivers to recognize and utilize the AW-NM386 module. Driver availability and installation methods depend on the host device's operating system and manufacturer.

  • Operacinės sistemos suderinamumas: The module is compatible with various operating systems, including MacOS. Consult your host device's documentation for specific driver requirements.
  • Vairuotojo šaltinis: Obtain the necessary drivers from the manufacturer of your host device or from Azurewave's official support channels.
  • Montavimo procedūra: Follow the instructions provided with the driver package. This typically involves running an installer executable or manually installing drivers through the device manager.
  • Patvirtinimas: After installation, verify that the module is recognized by the operating system and appears as a functional wireless adapter.

3. Naudojimo instrukcijos

Once the AW-NM386 module is installed and its drivers are configured, it functions as a standard wireless network adapter. The following steps describe general operation for connecting to a Wi-Fi network.

  1. Įgalinti „Wi-Fi“: Ensure that the Wi-Fi function is enabled on your host device. This is usually done through system settings or a dedicated hardware switch.
  2. Tinklų paieška: Open the network settings or Wi-Fi utility on your device. The module will automatically scan for available wireless networks (SSIDs) in range.
  3. Pasirinkite tinklą: From the list of available networks, select the desired Wi-Fi network you wish to connect to.
  4. Įveskite slaptažodį: If the network is secured, you will be prompted to enter the network's security key or password (WPA/WPA2, WEP). Enter the correct credentials.
  5. Prisijunkite: Confirm your selection to connect to the network. The device should indicate a successful connection.
  6. Patikrinkite ryšį: Test the internet connection by opening a web browser or an application that requires network access.

3.1 Išplėstiniai nustatymai

Depending on your operating system and driver capabilities, you may be able to configure advanced settings such as:

  • IP konfigūracija: Manual IP address, subnet mask, gateway, and DNS server settings.
  • Saugos protokolai: Specific WPA/WPA2, WEP, or 802.11i configurations.
  • Galios valdymas: Settings to optimize power consumption for the wireless module.
  • Ad-hoc režimas: Creating a peer-to-peer network (if supported by drivers).

Refer to your host device's operating system documentation or the module's driver documentation for detailed instructions on configuring advanced settings.

4. Priežiūra

The AW-NM386 Wireless LAN USB Module is designed for durability and requires minimal maintenance. However, following these guidelines can help ensure its longevity and optimal performance.

  • Laikyti sausai: Avoid exposing the module to moisture or liquids, as this can cause short circuits and permanent damage.
  • Švelniai valykite: If cleaning is necessary, use a soft, dry, lint-free cloth. Do not use harsh chemicals, solvents, or abrasive cleaners. Ensure the module is disconnected from power before cleaning.
  • Venkite fizinio streso: Do not bend, drop, or apply excessive force to the module. Handle it by its edges to prevent damage to components.
  • Temperatūros valdymas: Operate and store the module within its specified temperature range. Extreme temperatures can affect performance and lifespan.
  • Programinės įrangos / tvarkyklių atnaujinimai: Periodically check for updated drivers or firmware from Azurewave or your host device manufacturer. Updates can improve performance, add features, or fix bugs.

5. Problemų sprendimas

This section provides solutions to common issues you might encounter with the AW-NM386 Wireless LAN USB Module.

ProblemaGalima priežastisSprendimas
Module not detected by host device.
  • Netinkamas montavimas.
  • Trūkstami arba neteisingi tvarkyklės.
  • Sugedęs USB prievadas.
  • Ensure the module is securely seated in the USB port.
  • Install or reinstall the correct drivers for your operating system.
  • Try a different USB port on the host device.
  • Restart the host device.
Nepavyksta prisijungti prie „Wi-Fi“ tinklo.
  • Neteisingas „Wi-Fi“ slaptažodis.
  • Out of range of the Wi-Fi network.
  • Network interference.
  • Maršrutizatoriaus problemos.
  • Verify and re-enter the Wi-Fi password.
  • Move closer to the wireless router/access point.
  • Check for other devices causing interference (e.g., microwaves, cordless phones).
  • Iš naujo paleiskite belaidį maršrutizatorių.
Slow Wi-Fi speed or intermittent connection.
  • Silpnas signalo stiprumas.
  • Tinklo perkrova.
  • Pasenę vairuotojai.
  • Trukdymas.
  • Ensure good signal strength (move closer to router).
  • Reduce the number of devices on the network or activities consuming high bandwidth.
  • Update the module's drivers.
  • Change the Wi-Fi channel on your router to avoid interference.

If the problem persists after trying these solutions, consult the support resources for your host device or contact Azurewave customer support.

6. Specifikacijos

FunkcijaDetalė
Prekės ženklasAzurewave
Modelio numerisAW-NM386
ASINB00MHYQGSC
Techninės įrangos sąsajaUSB
Duomenų nuorodos protokolasIEEE 802.11n, IEEE 802.11b, IEEE 802.11g
Duomenų perdavimo spartaUp to 150 Megabits Per Second (1.5E+2 Mbps)
Suderinami įrenginiaiLaptop, PDAs, Netbooks, TVs, Tablets, Gaming Devices
Suderinama operacinių sistemų šeimaMacOS (and other OS with appropriate drivers)
UPC795945993080
Pirmoji laisva data7 m. rugpjūčio 2014 d

7. Informacija apie garantiją

Specific warranty terms for the Azurewave AW-NM386 module are typically provided by the manufacturer of the end-product in which it is integrated, or by Azurewave directly for bulk purchases. As an embedded component, its warranty may be covered under the warranty of the larger device it is part of.

For detailed warranty information, please refer to:

  • The documentation provided with your host device (e.g., laptop, tablet, smart TV).
  • Azurewave's official website or support portal for general product warranty policies.
  • Your point of purchase for specific return or replacement policies.

Note: The standard return policy for this product when purchased new is typically 30 days for refund/replacement, as per general retail terms. This does not constitute a manufacturer's warranty.

8. Pagalba ir kontaktinė informacija

For technical support, driver downloads, or further inquiries regarding the Azurewave AW-NM386 Wireless LAN USB Module, please utilize the following resources:

  • Azurewave Official Websvetainė: Visit the official Azurewave website for product documentation, driver updates, and support contact details. www.azurewave.com (Pastaba: tai yra vietos žymeklis URL as the exact support page is not provided.)
  • Host Device Manufacturer: If the module came pre-installed in a device, the primary support channel might be the manufacturer of that device. Refer to their support websvetainę arba vartotojo vadovą.
  • Mažmenininkų palaikymas: For purchase-related inquiries, contact the retailer from whom you acquired the product.

When contacting support, please have your product model number (AW-NM386) and any relevant host device information readily available.

Susiję dokumentai - AW-NM386

Preview „AzureWave AW-CM358-EVB“ naudotojo vadovas: IEEE 802.11ac ir „Bluetooth 5.2“ belaidis modulis
This user guide provides detailed instructions for setting up and testing the AzureWave AW-CM358-EVB, a 12mm x 12mm LGA module supporting IEEE 802.11 a/b/g/n/ac Wireless LAN and Bluetooth 5.2. It covers hardware and software requirements, RF transmit/receive test setups, WLAN and Bluetooth basic tests, and EVB attachment.
Preview „AzureWave AW-XM553-EVB“ naudotojo vadovas: IEEE 802.11ax „Wi-Fi“ ir „Bluetooth 5.2“ belaidis modulis
„AzureWave AW-XM553-EVB“ vertinimo plokštės su IEEE 802.11ax „Wi-Fi“ ir „Bluetooth 5.2“ naudotojo vadovas. Apima sistemos sąranką, aparatinės įrangos reikalavimus, programinės įrangos diegimą, radijo dažnių testavimą ir schemas.
Preview „AzureWave AW-XM646x“ serija: IEEE 802.11 a/b/g/n/ac/ax WLAN, BLE/802.15.4 12x12 LGA modulio duomenų lapas
Detailed datasheet and layout guide for the AzureWave AW-XM646x Series module. This document covers technical specifications, features, electrical characteristics, host interfaces (WLAN, Bluetooth, 802.15.4), pin definitions, and PCB layout recommendations for integrating this 12x12 LGA module into various applications.
Preview AW-HM610 IEEE 802.11ah belaidžio LAN modulio išdėstymo vadovas
Šiame dokumente pateikiamos esminės „AzureWave AW-HM610 IEEE 802.11ah“ belaidžio LAN modulio išdėstymo gairės ir rekomendacijos. Jame aptariamas radijo dažnių trasų maršrutizavimas, įžeminimo ir maitinimo plokštumos, skaitmeninės sąsajos, antenos aspektai, ekranavimas ir išdėstymo rekomendacijos, siekiant užtikrinti optimalų našumą ir išvengti elektromagnetinių trikdžių.
Preview „AzureWave AW-HM581“: IEEE 802.11ah belaidžio LAN modulio išdėstymo vadovas
Comprehensive layout guide for the AzureWave AW-HM581 IEEE 802.11ah Wireless LAN Module. Provides essential PCB design recommendations for RF traces, ground, power, antenna, and shielding to ensure optimal performance and EMI compliance.
Preview „AzureWave AW-NM430“: IEEE 802.11 b/g/n belaidžio LAN ir „Bluetooth 4.2“ duomenų lapas ir išdėstymo vadovas
Comprehensive datasheet and layout guide for the AzureWave AW-NM430 LGA module, detailing its IEEE 802.11 b/g/n Wi-Fi and Bluetooth 4.2 capabilities, specifications, electrical characteristics, pin definitions, mechanical and packaging information, and essential PCB layout recommendations for optimal performance. Includes FCC and IC compliance statements.