Bixolon SRP-350IIICOSG Thermal Receipt Printer User Manual

1. Įvadas

This manual provides essential instructions for the safe and efficient use of your Bixolon SRP-350IIICOSG Thermal Receipt Printer. Please read this manual thoroughly before operating the printer and retain it for future reference. This printer is designed for point-of-sale (POS) receipt printing applications.

2. Saugos informacija

• Maitinimas: Use only the power supply provided with the printer. Using an incorrect power supply may damage the printer and void the warranty.
• Vieta: Place the printer on a stable, level surface. Avoid locations with excessive dust, humidity, or direct sunlight.
• Vėdinimas: Užtikrinkite tinkamą vėdinimą aplink spausdintuvą, kad jis neperkaistų. Neužblokuokite ventiliacijos angų.
• Skysčio kontaktas: Keep the printer away from liquids. In case of accidental liquid spillage, immediately disconnect the power and contact qualified service personnel.
• Judančios dalys: Keep hands and foreign objects away from the paper cutter and other moving parts during operation.

3. Pakuotės turinys

Patikrinkite, ar pakuotėje yra visi reikalingi daiktai:

• Bixolon SRP-350IIICOSG Thermal Receipt Printer
• Maitinimo šaltinis
• Maitinimo laidas
• Starter Paper Roll
• Vartotojo vadovas (šis dokumentas)

4. Sąranka

4.1 Išpakavimas ir įdėjimas

Carefully remove the printer from its packaging. Place the printer on a flat, stable surface near your computer or POS system.

4.2 Maitinimo šaltinio prijungimas

1. Prijunkite maitinimo laidą prie maitinimo šaltinio.
2. Plug the power supply connector into the power port on the back of the printer.
3. Įjunkite maitinimo laidą į įžemintą elektros lizdą.

4.3 Connecting Data Cables

The SRP-350IIICOSG printer supports Serial and USB interfaces.

4.3.1 pav.: galinis view of the Bixolon SRP-350IIICOSG printer, illustrating the various connection ports including power, USB, serial, and Ethernet.

• USB jungtis: Connect one end of a USB cable (Type B) to the USB port on the printer and the other end to an available USB port on your computer or POS system.
• Serijinis ryšys: Connect one end of a serial cable (DB9) to the serial port on the printer and the other end to an available serial port on your computer or POS system.

4.4 Popieriaus ritinio įdėjimas

1. Atidarykite spausdintuvo dangtį paspausdami dangčio atidarymo svirtį.
2. Insert the new paper roll into the paper compartment with the paper feeding from the bottom.
3. Ištraukite nedidelį kiekį popieriaus pro pjaustytuvą.
4. Tvirtai uždarykite spausdintuvo dangtį, kol jis spragtelėdamas užsifiksuos.

4.4.1 pav.: Priekinė pusė view of the Bixolon SRP-350IIICOSG printer, showing a paper roll correctly loaded and ready for printing.

4.5 Tvarkyklės diegimas

Before using the printer, you must install the appropriate drivers on your computer or POS system. Drivers are typically available on the Bixolon official website. Follow the instructions provided with the driver package for installation.

5. Spausdintuvo valdymas

5.1 Įjungimas / išjungimas

To power on the printer, press the power switch located on the side or back of the printer to the 'ON' position. To power off, press the switch to the 'OFF' position.

5.2 Būsenos indikatoriai

The printer features LED indicators to show its current status:

• Maitinimo šviesos diodas: Illuminates when the printer is powered on.
• Klaidos šviesos diodas: Flashes or illuminates to indicate an error condition (e.g., paper out, cover open, cutter error). Refer to the troubleshooting section for details.
• Popierinis šviesos diodas: Šviečia, kai popieriaus ritinėlis yra mažas arba pasibaigęs.

5.3 Bandomojo puslapio spausdinimas

To print a self-test page:

1. Įsitikinkite, kad spausdintuvas išjungtas ir įdėtas popierius.
2. Laikykite nuspaudę mygtuką FEED.
3. While holding the FEED button, turn on the printer.
4. Release the FEED button once the printer starts printing.

The printer will print a test page showing its current settings and status.

6. Priežiūra

6.1 Spausdinimo galvutės valymas

Regular cleaning of the print head ensures optimal print quality and extends printer life. Clean the print head using an alcohol swab or a specialized print head cleaning pen.

1. Išjunkite spausdintuvą ir atjunkite maitinimo laidą.
2. Atidarykite spausdintuvo dangtį.
3. Gently wipe the thermal elements of the print head with the cleaning tool.
4. Prieš uždarydami dangtį ir vėl prijungdami maitinimą, leiskite spausdinimo galvutei visiškai išdžiūti.

6.2 Popieriaus ritinėlio keitimas

When the paper roll is depleted, the paper out LED will illuminate. Follow the steps in Section 4.4 to replace the paper roll.

6.3 Automatinio pjaustytuvo valymas

If the auto cutter experiences frequent jams or malfunctions, it may require cleaning. Use a soft brush or compressed air to remove paper dust and debris from the cutter mechanism.

7. Problemų sprendimas

Šiame skyriuje aptariamos dažniausiai pasitaikančios spausdintuvo problemos.

8. Specifikacijos

Key technical specifications for the Bixolon SRP-350IIICOSG Thermal Receipt Printer:

9. Garantija ir palaikymas

For warranty information and technical support, please refer to the warranty card included with your product or visit the official Bixolon websvetainėje. Ten galite rasti vairuotojus, DUK ir klientų aptarnavimo kontaktinę informaciją.

Bixolon Official Websvetainė: www.bixolon.com