Vartotojo vadovas

Įvadas

This manual provides instructions for the setup, operation, and maintenance of your Mitel 6867i SIP Phone. The Mitel 6867i is designed for users requiring advanced communication features and high-quality audio. It features HD wideband audio, an enhanced speakerphone, dual Gigabit Ethernet ports, a large color LCD display, and programmable keys.

1 paveikslas: Mitel 6867i SIP Phone, angled view showing the handset, display, keypad, and programmable buttons.

Sąranka

Follow these steps to set up your Mitel 6867i SIP Phone. Ensure all components are present before beginning.

1. Išpakavimas ir komponentų patikrinimas

Carefully remove all items from the packaging. Verify that the following components are included:

• Mitel 6867i SIP Phone base unit
• Ragelis
• Ragelis laidas
• Ethernet kabelis
• Stalo stovas
• (Power supply not included - typically sold separately or provided by your service provider)

2. Stalo stovo pritvirtinimas

Align the desk stand with the slots on the back of the phone unit. Press firmly until it clicks into place. The stand allows for two viewkampų.

3. Ragelio prijungimas

Connect one end of the coiled handset cord to the handset and the other end to the handset port on the phone base unit.

4. Network and Power Connections

The Mitel 6867i supports Power over Ethernet (PoE) or an optional AC power adapter (not included).

1. Ethernet jungtis: Connect one end of the Ethernet cable to the LAN port on the back of the phone and the other end to a network switch or router. If using PoE, the phone will power on automatically.
2. Optional AC Power (if not using PoE): If PoE is not available, connect an appropriate 48V AC power adapter (not included) to the power port on the back of the phone, then plug the adapter into a wall outlet.

2 paveikslas: Galinis view of the Mitel 6867i SIP Phone showing the various ports, including the LAN port, PC port, handset port, and power input.

3 paveikslas: Priekyje view of the Mitel 6867i SIP Phone, displaying the color LCD screen, keypad, and various function buttons.

5. Pradinis paleidimas

Once connected, the phone will power on and begin its boot-up sequence. This may take a few minutes as it connects to the network and registers with your VoIP service provider. The display will show progress and eventually indicate readiness for use.

Naudojimo instrukcijos

Skambinimas

• Pakėlimo ragelis: Pakelkite ragelį arba paspauskite Garsiakalbis mygtuką arba paspauskite galimą Linija raktas.
• Rinkti numerį: Surinkite norimą telefono numerį naudodami klaviatūrą.
• Press Dial/Send: Paspauskite Surinkite soft key (if available) or wait for the call to connect automatically.

Atsiliepimas į skambutį

• Pakėlimo ragelis: Pakelkite ragelį.
• Paspauskite garsiakalbį: Paspauskite Garsiakalbis mygtuką.
• Press Answer Soft Key: Paspauskite Atsakymas soft key displayed on the screen.

Pokalbio užbaigimas

• Pakabinti: Įdėkite ragelį atgal į laikiklį.
• Paspauskite „Baigti skambutį“: Paspauskite Baigti skambutį programinį klavišą arba Garsiakalbis button (if using speakerphone).

Garsumo valdymas

Naudokite Apimtis buttons (typically located below the display) to adjust the handset, speakerphone, or ringer volume.

Naudojant garsiakalbį

Paspauskite Garsiakalbis button to activate or deactivate the speakerphone function during a call.

Ausinių naudojimas

Connect a compatible headset to the headset port on the phone. Press the Ausinės button to switch between headset and handset/speakerphone modes. The Mitel 6867i supports native DHSG/EHS headsets.

Skambučių valdymo funkcijos

• Laikyti: Aktyvaus skambučio metu paspauskite Laikykis button or soft key. The call will be placed on hold. Press again to resume.
• Pervedimas: Aktyvaus skambučio metu paspauskite Perdavimas button or soft key. Dial the number to transfer to, then press Perdavimas again (for blind transfer) or wait for the party to answer and announce the call before pressing Perdavimas (dėl perkėlimo su dalyviu).
• Konferencija: Aktyvaus skambučio metu paspauskite Konferencija button or soft key. Dial the number of the third party. Once connected, press Konferencija vėl prisijungti prie visų partijų.

Priežiūra

Proper care and maintenance will ensure the longevity and optimal performance of your Mitel 6867i SIP Phone.

• Valymas: Naudokite minkštą, šiek tiek damp, lint-free cloth to clean the phone's surfaces. Avoid using harsh chemicals, abrasive cleaners, or aerosol sprays, as these can damage the finish and internal components.
• Ekrano priežiūra: For the LCD display, use a screen-specific cleaner if necessary, applied to a cloth, not directly to the screen.
• Aplinka: Keep the phone away from excessive heat, direct sunlight, and moisture. Ensure it is placed on a stable surface.
• Laidai: Regularly check all cords (handset, Ethernet) for any signs of wear or damage. Replace if necessary.

Trikčių šalinimas

If you encounter issues with your Mitel 6867i SIP Phone, refer to the following common problems and solutions.

Nėra maitinimo / ekranas išjungtas

• Patikrinkite maitinimo šaltinį: Ensure the Ethernet cable is securely connected to a PoE-enabled port, or that the AC power adapter (if used) is properly connected to the phone and a working power outlet.
• Patikrinkite PoE: Confirm that the network switch port provides Power over Ethernet.
• Try Different Outlet/Port: Test with a different power outlet or network port.

Nėra rinkimo tono

• Tinklo prisijungimas: Ensure the Ethernet cable is securely connected and the network is active.
• SIP registracija: Check the phone's display for any "Not Registered" or "Network Error" messages. Contact your VoIP service provider if the phone fails to register.
• Perkraukite telefoną: Disconnect and reconnect the power source to reboot the phone.

Prasta garso kokybė

• Tinklo perkrova: High network traffic can affect call quality. Check your internet connection speed and other network usage.
• Kabelių jungtys: Ensure all cables (handset, headset, Ethernet) are securely connected.
• Garsumo nustatymai: Sureguliuokite garsumą naudodami garsumo mygtukus.
• Handset/Headset Issue: Test with speakerphone or a different handset/headset if possible.

Raktai nereaguoja

• Perkraukite telefoną: Perform a power cycle by disconnecting and reconnecting the power.
• Clean Phone: Įsitikinkite, kad aplink mygtukus nėra prilipusių šiukšlių.

Specifikacijos

Key technical specifications for the Mitel 6867i SIP Phone.

Garantija ir palaikymas

For warranty information, technical support, or further assistance, please contact your Mitel product reseller or VoIP service provider. They can provide specific details regarding your product's warranty coverage and offer specialized support for your network configuration.

Additional resources may be available on the official Mitel websvetainę.