„COMPUTERM Q7“ programuojamo skaitmeninio kambario termostato naudotojo vadovas

1. Įvadas

The COMPUTHERM Q7 is a programmable digital room thermostat designed to control heating and air conditioning systems. It allows for precise temperature regulation and offers multiple programming options to optimize comfort and energy efficiency. This manual provides detailed instructions for installation, operation, and programming of your Q7 thermostat.

1.1 vaizdas: The COMPUTHERM Q7 thermostat highlighting key features such as 0.5°C temperature increments, compatibility with heating/cooling systems, a temperature range of 5-40°C, 24-250V power compatibility, and 6 daily programs.

2. Saugos informacija

• Always disconnect power to the heating/cooling system at the main circuit breaker before installing or servicing the thermostat.
• Installation should be performed by a qualified electrician or heating engineer if you are unsure about the wiring process.
• Do not expose the thermostat to direct sunlight, extreme temperatures, or high humidity.
• Ensure the thermostat is mounted at an appropriate height (approximately shoulder height) in the living area for accurate temperature readings.

3. Pakuotės turinys

Patikrinkite pakuotę, ar joje yra šie daiktai:

• COMPUTHERM Q7 programuojamas skaitmeninis kambario termostatas
• Instrukcijų vadovas
• Tvirtinimo priedai (varžtai, sieniniai kaiščiai)

3.1 vaizdas: The COMPUTHERM Q7 thermostat shown alongside its retail packaging.

4. Produktas baigtasview

The COMPUTHERM Q7 thermostat features a clear digital display and intuitive buttons for easy operation.

4.1 vaizdas: Priekyje view of the COMPUTHERM Q7 thermostat, showing the digital display with time, program number, set temperature, and room temperature, along with the '+' and '-' adjustment buttons.

4.1. Ekrano elementai

• MON/TUE/WED/THU/FRI/SAT/SUN: Savaitės dienos indikatorius.
• LAIKAS: Dabartinis laikas.
• PROGRAMA: Current program number (0-6).
• NUSTATYTI TEMP.: Pageidaujama temperatūra.
• ROOM TEMP: Dabartinė kambario temperatūra.
• Šildymo / vėsinimo indikatorius: Icon indicating active heating or cooling.

4.2. Mygtukai

• +: Increase value, navigate forward.
• -: Decrease value, navigate backward.
• LAIKYTI: Activates/deactivates permanent manual temperature hold.
• DIENA: Used for setting day/time and short-term programs.
• ŠVIESA: Activates backlight, adjusts backlight behavior.
• KOPIJA: Copies program settings between days.
• PROGRAMA: Enters/confirms program settings.
• NUSTATYTI: Confirms settings, exits menus, cancels manual modes.

5. Montavimas

Proper installation is crucial for the thermostat's performance. Ensure power is disconnected before proceeding.

5.1. Termostato montavimas

1. Choose a suitable location on an interior wall, away from direct sunlight, drafts, and heat sources. The recommended height is approximately shoulder height.
2. Separate the front panel from the back plate of the thermostat.
3. Mark the drilling points on the wall using the back plate as a template.
4. Išgręžkite skyles ir įkiškite sieninius kaiščius.
5. Secure the back plate to the wall with screws.

5.1 vaizdas: The COMPUTHERM Q7 thermostat installed on a wall in a typical home environment, demonstrating its discreet design.

5.2. Laidai

The COMPUTHERM Q7 thermostat requires two AA batteries for power and connects to your heating/cooling system via two wires.

1. Ensure the main power supply to your heating/cooling system is OFF.
2. Connect the two wires from your boiler or heating/cooling system to connectors 1 ir 2 on the thermostat's back plate. The polarity of these connections does not matter.
3. Connector 3 is typically not used for standard installations.
4. Once wired, carefully attach the front panel of the thermostat to the back plate.

5.2 vaizdas: Galinis view of the COMPUTHERM Q7 thermostat, illustrating the battery compartment and the wiring terminals (1, 2, 3) for connection to the heating/cooling system.

5.3. Akumuliatoriaus įdėjimas

The thermostat is powered by 2 AA batteries.

1. Atidarykite akumuliatoriaus skyrių, esantį termostato gale.
2. Įdėkite dvi AA tipo baterijas, užtikrindami teisingą poliškumą (+/-).
3. Uždarykite akumuliatoriaus skyrių.

6. Pradinė sąranka

6.1. Termostato nustatymas iš naujo

If you need to reset the thermostat to factory settings, locate the small black 'Reset' button inside the battery compartment. Press and hold this button for approximately 5 seconds. The display will clear and reset.

6.2. Datos ir laiko nustatymas

1. Paspauskite DIENA button. The day of the week will start flashing.
2. Naudokite + or - mygtukai, norėdami pasirinkti dabartinę dieną.
3. Paspauskite DIENA button again. The hour will start flashing.
4. Naudokite + or - mygtukais nustatykite dabartinę valandą.
5. Paspauskite DIENA button again. The minutes will start flashing.
6. Naudokite + or - mygtukus, kad nustatytumėte dabartines minutes.
7. Paspauskite NUSTATYTI button to save the date and time settings.

7. Operating Modes & Programming

7.1. Manual Temperature Adjustment (Temporary Override)

To temporarily adjust the temperature until the next programmed period:

1. Įprastu darbo režimu naudokite + or - mygtukus norimai temperatūrai nustatyti.
2. A hand symbol will appear on the display, indicating manual mode.
3. After approximately 5 seconds, the new temperature will be set. The clock display will alternate between the current time and 'Time Left', showing the duration until the next programmed period.
4. This manual setting will automatically cancel when the next programmed period begins.
5. To cancel manual mode before the next program, press the NUSTATYTI mygtuką.

7.2. Hold Temperature (Permanent Manual Mode)

To maintain a specific temperature indefinitely:

1. Naudokite + or - mygtukus norimai temperatūrai nustatyti.
2. Paspauskite LAIKYTI button. A key symbol will appear on the display.
3. The thermostat will maintain this temperature until you manually cancel it.
4. To cancel the hold function, press the NUSTATYTI mygtuką.

7.3. Programming Daily Schedules (P0-P6)

The thermostat allows for 6 programmable periods (P0 to P6) per day. Program P0 is fixed at 00:00 and only its temperature can be adjusted.

1. Paspauskite ir palaikykite NUSTATYTI mygtuką, tada vienu metu paspauskite PROG button. The day of the week will start flashing.
2. Naudokite + or - buttons to select the day(s) you wish to program (you can select multiple days if they are all flashing).
3. Paspauskite PROG. The desired temperature for Program 0 (P0) will flash (time is fixed at 00:00).
4. Naudokite + or - buttons to set the desired temperature for P0.
5. Paspauskite PROG to move to Program 1 (P1). The hour for P1 will flash.
6. Naudokite + or - buttons to set the desired hour for P1.
7. Paspauskite PROG. The temperature for P1 will flash.
8. Naudokite + or - buttons to set the desired temperature for P1.
9. Repeat steps 6-8 for Programs P2 through P6.
10. Nustatę visas norimas programas, paspauskite NUSTATYTI mygtuką, kad išsaugotumėte ir išeitumėte iš programavimo režimo.

Deleting a Program Interval

To delete a specific program interval (P1-P6), set its time to ' - - : - - ' (which appears when you set the time to 00:00 during programming). Then press NUSTATYTI išsaugoti.

7.4. Copying Programs

To copy program settings from one day to another:

1. Paspauskite ir palaikykite KOPIJUOT button for 3 seconds until the day of the week starts flashing.
2. Naudokite + or - buttons to select the source day (the day you want to copy from).
3. Paspauskite KOPIJUOT. The selected day will stop flashing.
4. Naudokite + or - buttons to select the destination day(s) (the day(s) you want to copy to).
5. Paspauskite KOPIJUOT to apply the copy. Repeat for additional destination days if needed.
6. Paspauskite NUSTATYTI button to confirm and save the copied programs.

7.5. Short-Term Program (1-9 Hours)

This function allows you to set a temporary temperature for a specific number of hours (1 to 9).

1. Naudokite + or - buttons to set the desired temperature for the short-term period.
2. Paspauskite DIENA button. A suitcase symbol will appear, and the hour display will flash.
3. Naudokite + or - buttons to select the number of hours (1 to 9).
4. Wait for approximately 5 seconds for the setting to save automatically. The clock display will alternate between the current time and 'Time Left', showing the remaining duration.
5. This program will automatically cancel after the set hours, and the thermostat will revert to its regular schedule.
6. To cancel this function manually, press the NUSTATYTI mygtuką.

7.6. Holiday Program (1-99 Days)

This function allows you to set a specific temperature for an extended period (1 to 99 days), useful when you are away from home.

1. Naudokite + or - buttons to set the desired temperature for your holiday period.
2. Paspauskite ir palaikykite LAIKYTI button for 3 seconds. Initially, a key symbol will appear, then a suitcase symbol will appear, and the day display will flash.
3. Naudokite + or - buttons to select the number of days (1 to 99).
4. Wait for approximately 5 seconds for the setting to save automatically. The clock display will alternate between the current time and 'Time Left', showing the remaining days.
5. This program will automatically cancel after the set days, and the thermostat will revert to its regular schedule.
6. To cancel this function manually, press the NUSTATYTI mygtuką.

7.7. HEAT/COOL Mode Selection

The thermostat can operate in either heating or cooling mode.

1. Paspauskite ir palaikykite NUSTATYTI mygtuką, tada vienu metu paspauskite KOPIJUOT button. 'HEAT' or 'COOL' will appear on the display.
2. Naudokite + or - buttons to switch between 'HEAT' (for heating systems) and 'COOL' (for air conditioning systems).
3. Paspauskite NUSTATYTI mygtuką, kad išsaugotumėte pasirinkimą.

• In ŠILUMAS mode: The connected appliance (e.g., boiler) will activate when the room temperature falls below the desired temperature.
• In KIAUSI mode: The connected appliance (e.g., air conditioner) will activate when the room temperature rises above the desired temperature.

7.8. Foninio apšvietimo nustatymai

The ŠVIESA button controls the display backlight.

• Trumpas mygtuko paspaudimas ŠVIESA button will illuminate the display for approximately 10 seconds.
• To change the backlight behavior, press and hold the ŠVIESA button for 5 seconds. 'L:ON' or 'L:OF' will appear on the display.
• Naudokite + or - buttons to toggle between:
• L:ON: The backlight will illuminate with every button press.
• L:OF: The backlight will only illuminate when the ŠVIESA paspaudžiamas mygtukas.
• Paspauskite NUSTATYTI to confirm your selection. Note that 'L:ON' mode will consume batteries faster.

7.9. Switching Sensitivity Adjustment

This setting determines the temperature differential before the heating/cooling system activates or deactivates.

1. Paspauskite DIENA mygtuką, tada nedelsdami paspauskite KOPIJUOT mygtuką.
2. Naudokite + or - buttons to select the desired sensitivity: 'S:1', 'S:2', or 'S:3'.
3. Paspauskite NUSTATYTI patvirtinti.

• S:1: Sensitivity of ±0.1°C. For a target of 20°C, heating activates at 19.9°C and deactivates at 20.1°C.
• S:2: Sensitivity of ±0.2°C. For a target of 20°C, heating activates at 19.8°C and deactivates at 20.2°C.
• S:3: Sensitivity of ±0.3°C. For a target of 20°C, heating activates at 19.7°C and deactivates at 20.3°C.

7.10. Temperatūros kalibravimas

You can calibrate the thermostat's temperature reading to match a reference thermometer or to compensate for its location.

1. Paspauskite DIENA mygtuką, tada nedelsdami paspauskite LAIKYTI mygtuką.
2. Naudokite + or - buttons to adjust the temperature offset (e.g., -1.0°C to make the thermostat read 1°C lower).
3. Paspauskite NUSTATYTI to confirm. The change will take effect after approximately 10 seconds.

7.11. Pump Protection Function

This function helps prevent damage to your heating system's pump during periods of inactivity.

1. Paspauskite DIENA mygtuką, tada nedelsdami paspauskite PROG mygtuką.
2. Naudokite + or - buttons to select 'HP:ON' or 'HP:OF'.
3. Paspauskite NUSTATYTI patvirtinti.

• HP:ON: The pump will automatically run for 1 minute each day, even if no heating is scheduled, to prevent seizing.
• HP:OF: Pump protection is disabled.

7.12. Mygtukų užraktas

To prevent accidental changes, you can lock the thermostat buttons.

1. To lock the buttons, press the + ir - buttons simultaneously for 5 seconds. A lock symbol will appear.
2. To unlock the buttons, press the + ir - buttons simultaneously for 5 seconds again. The lock symbol will disappear.

8. Priežiūra

8.1. Baterijos keitimas

When the battery low indicator appears on the display, replace the batteries promptly to ensure continuous operation. Refer to section 5.3 for battery installation instructions.

8.2. Valymas

Clean the thermostat's exterior with a soft, dry cloth. Do not use abrasive cleaners, solvents, or spray directly onto the device.

9. Problemų sprendimas

10. Specifikacijos

11. Garantija ir palaikymas

The COMPUTHERM Q7 thermostat comes with a 2 metų gamintojo garantija nuo pirkimo datos. Prašome išsaugoti pirkimo įrodymą garantiniams reikalavimams.

For technical support or warranty inquiries, please refer to the contact information provided with your product packaging or visit the official COMPUTHERM websvetainę.