Įvadas
The Ematic HL-101 XO Vision 2 Channel High to Low Converter is designed to integrate aftermarket amplifiers into vehicle audio systems that lack RCA pre-amp outputs. It converts high-level speaker outputs from your car stereo into low-level RCA signals, allowing for a clean audio signal to your amplifier. This unit also features a built-in 12V remote turn-on function.
Saugos informacija
- Prieš montuodami visada atjunkite automobilio akumuliatorių, kad išvengtumėte trumpojo jungimo.
- Ensure all wiring connections are secure and properly insulated to avoid short circuits and damage to equipment.
- Mount the converter in a dry location, away from excessive heat, moisture, and moving parts.
- Jei nesate tikri dėl kurios nors montavimo proceso dalies, kreipkitės į profesionalų automobilių garso sistemų montuotoją.
Pakuotės turinys
- Ematic HL-101 XO Vision 2 Channel High to Low Converter
- (Note: Additional items like wiring harnesses or mounting hardware may be included depending on the specific retail package.)
Produktas baigtasview
The HL-101 features a compact design with clear housing, allowing visibility of internal components. It includes RCA output jacks and a multi-wire harness for connections.
1 paveikslas: Į viršų view of the Ematic HL-101 converter, showing the wiring harness and connection labels.
2 paveikslas: Šoninė view of the Ematic HL-101 converter, highlighting the RCA output jacks.
Sąranka ir diegimas
Follow these steps for proper installation of your HL-101 converter:
- Atjunkite akumuliatorių: Prieš užvesdami variklį, atjunkite neigiamą automobilio akumuliatoriaus gnybtą.
- Garsiakalbių laidų identifikavimas: Locate the speaker output wires from your car's head unit (stereo). Refer to your vehicle's wiring diagram if necessary.
- Laidų jungtys: Connect the HL-101's input wires to the corresponding speaker wires from your head unit. Refer to the wiring diagram below and on the device label (Figure 1).
- Pilka: RIGHT(+) Speaker Input
- Pilka/juoda: RIGHT(-) Speaker Input
- Balta: LEFT(+) Speaker Input
- Balta juoda: LEFT(-) Speaker Input
- Geltona: 12V (Battery) Power Input
- Juoda: ŽEMĖ
- Mėlyna: 12V Remote Output (to amplifier's remote turn-on input)
- Maitinimas ir įžeminimas: Connect the Yellow wire to a constant 12V power source (e.g., directly to the battery with an inline fuse, or a fused accessory wire). Connect the Black wire to a good chassis ground point.
- RCA išvestis: Connect RCA cables from the HL-101's RCA output jacks (Figure 2) to the RCA input jacks on your aftermarket ampgyvesnis.
- Nuotolinis įjungimas: Connect the Blue wire from the HL-101 to the remote turn-on input of your amplifier. This will turn on your amppakėlėjas, kai įjungtas galvos įrenginys.
- Saugus laidas: Ensure all connections are soldered or crimped securely and insulated with electrical tape or heat shrink tubing.
- Mount Converter: Securely mount the HL-101 in a suitable location, ensuring it is not exposed to excessive heat or moisture.
- Iš naujo prijunkite akumuliatorių: Once all connections are verified, reconnect the negative terminal of your vehicle's battery.
Operacija
The Ematic HL-101 automatically converts the high-level speaker signals to low-level RCA outputs. The unit features a single dial for level matching. Adjust this dial to achieve a balanced audio output between your head unit and amplifier, ensuring optimal sound quality without distortion.
The built-in 12V remote turn-on feature will automatically activate your amplifier when your car's head unit is turned on, eliminating the need for a separate remote wire from the head unit.
Priežiūra
The Ematic HL-101 requires minimal maintenance. Keep the unit clean and free from dust and debris. Periodically check all wiring connections to ensure they remain secure and free from corrosion. Avoid exposing the unit to extreme temperatures or moisture.
Trikčių šalinimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Nėra garso iš ampgyvybingesnis | No power to HL-101; Incorrect wiring; Ampgelbėtojas neįsijungia. | Check 12V (Yellow) and Ground (Black) connections. Verify speaker input wires (Gray, Gray/Black, White, White/Black) are correctly connected. Ensure Blue remote wire is connected to ampgyvybingesni ir ampgelbėtojas gauna galią. |
| Iškraipytas garsas | Input level too high; Improper gain settings on ampgyvesnis. | Adjust the level dial on the HL-101. Reduce the gain settings on your amplifier. Ensure speaker wires are not reversed (+/-). |
| Variklio triukšmas / švilpimas | Įžeminimo kilpos trukdžiai. | Ensure the HL-101's ground wire is connected to a clean, solid chassis ground. Check for proper grounding of all audio components. |
Specifikacijos
- Modelis: HL-101
- Prekinis ženklas: Ematic
- Kanalų skaičius: 2
- Didžiausia tiekimo apimtistage: 12 voltų
- Ryšio technologijos: RCA
- Medžiaga: Aliuminis (korpusas)
- Gaminio matmenys (I x P x A): 6.2 x 3.75 x 1 colio
- Prekės svoris: 0.352 uncijos
Garantija ir palaikymas
For warranty information or technical support, please refer to the documentation provided with your purchase or visit the official Ematic websvetainėje. Išsaugokite pirkimo įrodymą garantiniams reikalavimams.