Įvadas
This manual provides detailed instructions for the installation, operation, and maintenance of your DS18 SLC10S 10-inch Car Subwoofer. Please read this manual thoroughly before attempting installation or operation to ensure proper function and longevity of your product. Retain this manual for future reference.
The DS18 SLC10S is a 10-inch car audio subwoofer designed to enhance your vehicle's sound system with deep, clear bass. It features a paper glass fiber cone, black steel basket, single voice coil with 4 Ohm impedance, and a foam surround, capable of handling up to 440W MAX power.
Saugos informacija
- Prieš pradėdami bet kokius elektros darbus, visada atjunkite automobilio akumuliatoriaus neigiamą gnybtą.
- Ensure proper wiring and connections to prevent electrical shorts, overheating, or damage to the subwoofer and ampgyvesnis.
- Use appropriate gauge wiring for power, ground, and speaker connections.
- Mount the subwoofer securely within a suitable enclosure to prevent movement during vehicle operation.
- Saugokite žemųjų dažnių garsiakalbį nuo per didelės drėgmės ar ekstremalių temperatūrų.
- Do not operate the subwoofer beyond its specified power handling limits to prevent damage.
- Jei nesate tikri dėl kurio nors įrengimo proceso aspekto, kreipkitės į profesionalų automobilių garso sistemų montuotoją.
Pakuotės turinys
- 1 x DS18 SLC10S 10-inch Car Subwoofer
- Instrukcijų vadovas (šis dokumentas)
Note: Additional mounting hardware or wiring may be required and is sold separately.
Sąranka ir diegimas
Proper installation is crucial for optimal performance and safety. Follow these guidelines for setting up your DS18 SLC10S subwoofer.
Korpuso rekomendacijos
The SLC10S subwoofer is designed to perform well in both sealed and ported enclosures. Refer to the specifications for optimal volume recommendations.
- Optimum Sealed Enclosure Volume: 0.70 pėdos³ (19.8 litro)
- Optimum Ported Enclosure Volume: 1.09 pėdos³ (30.8 litro)
Consider the Thiele & Small parameters provided in the specifications section for custom enclosure designs.
Montavimo matmenys
Ensure your chosen enclosure or mounting location accommodates the subwoofer's physical dimensions.
- Bendras skersmuo: 10.23 colio (260 mm)
- Reflektorių išpjovos skersmuo: 9.13 colio (232 mm)
- Montavimo gylis: 4.44 colio (113 mm)
Figure 1: Subwoofer Dimensions and Specifications. This diagram illustrates the physical measurements required for proper installation, including the overall diameter, baffle cutout diameter, and mounting depth, along with key electrical specifications.
Figure 2: Thiele & Small Parameters and Enclosure Volumes. This image provides critical acoustic parameters (Fs, Re, Qes, Qms, Qts, Vas, Xmax) and recommended sealed and ported enclosure volumes for optimal subwoofer performance.
Laidų jungtys
The SLC10S features a single voice coil with a 4 Ohm impedance. Connect the subwoofer to a compatible amplifier that can safely operate at a 4 Ohm load. Ensure correct polarity (+ to + and - to -) for all connections.
Figure 3: Subwoofer Rear View. This image displays the rear of the subwoofer, highlighting the speaker terminals for wiring connections. Observe proper polarity during installation.
For detailed wiring diagrams specific to your amplifier and system configuration, consult your amplifier's manual or a professional installer.
Naudojimo instrukcijos
Initial Break-in Period
Like many audio components, your subwoofer will benefit from a break-in period. During the first 10-20 hours of use, operate the subwoofer at moderate volume levels. This allows the suspension components (surround and spider) to loosen up and reach their optimal compliance, leading to improved sound quality and longevity.
Sistemos derinimas
After the break-in period, you can fine-tune your audio system. Adjust the amplifier's gain, crossover frequency, and bass boost settings to achieve your desired sound. Start with low settings and gradually increase them, listening for any distortion. If distortion is heard, reduce the settings immediately.
- Stiprinimo nustatymas: Suderinkite ampLifierio įėjimo jautrumas išėjimo garsumuitage of your head unit. Avoid setting the gain too high, as this can lead to clipping and damage.
- Žemųjų dažnių filtras (LPF): Nustatykite LPF savo įrenginyje. amplifier to filter out high frequencies from the subwoofer, typically between 80 Hz and 120 Hz, depending on your other speakers.
- Ikigarsinis filtras (HPF): Jei jūsų amplifier has a subsonic filter, set it slightly below your enclosure's tuning frequency (for ported enclosures) or around 25-30 Hz (for sealed enclosures) to protect the subwoofer from playing frequencies too low for its design.
Priežiūra
The DS18 SLC10S subwoofer requires minimal maintenance. Regular care will help preserve its appearance and performance.
- Valymas: Kūgį ir apvadą nuvalykite minkšta, sausa šluoste. Venkite naudoti stiprių cheminių medžiagų ar abrazyvinių valiklių.
- Patikra: Periodically check the speaker terminals and wiring connections to ensure they are secure and free from corrosion. Inspect the surround for any signs of cracking or damage.
- Aplinka: Keep the subwoofer free from dust, debris, and direct sunlight, which can degrade materials over time.
Trikčių šalinimas
Jei kyla problemų dėl žemųjų dažnių garsiakalbio, žr. šias dažniausiai pasitaikančias problemas ir sprendimus:
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Nėra garso iš žemųjų dažnių garsiakalbio |
|
|
| Iškraipytas garsas |
|
|
| Silpnas arba prislopintas bosas |
|
|
If these steps do not resolve the issue, contact DS18 customer support or a qualified technician.
Specifikacijos
Detailed technical specifications for the DS18 SLC10S 10-inch Car Subwoofer:
| Modelis | SLC10S |
| Garsiakalbio tipas | Žemųjų dažnių garsiakalbis |
| Žemųjų dažnių garsiakalbio skersmuo | 10 colių |
| RMS galios valdymas | 220 vatų |
| Maksimalus valdymas | 440 vatų |
| Varža | 4 Ohm (Single Voice Coil) |
| Dažnio atsakas | 40 Hz–4.5 kHz |
| Jautrumas (1w/1m) | 88 dB |
| Kūgio medžiaga | Paper with Glass Fiber |
| Erdvinė medžiaga | Treated Foam |
| Krepšelio medžiaga | Juodas Plienas |
| Balso ritės skersmuo | 2 colio (50.8 mm) |
| Magneto svoris | 45 uncijų feritas |
| Bendras skersmuo | 10.23 colio (260 mm) |
| Reflektorių išpjovos skersmuo | 9.13 colio (232 mm) |
| Montavimo gylis | 4.44 colio (113 mm) |
| Prekės svoris | 8 svaro |
| Optimum Sealed Enclosure | 0.70 pėdos³ (19.8 litro) |
| Optimum Ported Enclosure | 1.09 pėdos³ (30.8 litro) |
| xmax | 17 mm (0.67 colio) |
| Fs (rezonansinis dažnis) | 40 Hz |
| Re (nuolatinės srovės varža) | 3.6 omai |
| Qes (Electrical Q Factor) | 0.891 |
| Qms (Mechanical Q Factor) | 5.878 |
| Qts (Total Q Factor) | 0.774 |
| Vas (ekvivalentinis tūris) | 37 litrai |
Informacija apie garantiją
The DS18 SLC10S subwoofer comes with a limited warranty. For specific details regarding warranty coverage, duration, and claims process, please refer to the official DS18 websvetainėje arba susisiekite tiesiogiai su jų klientų aptarnavimo tarnyba. Išsaugokite pirkimo įrodymą, kad galėtumėte patvirtinti garantiją.
Palaikymas
For further assistance, technical support, or inquiries regarding your DS18 SLC10S subwoofer, please visit the official DS18 website or contact their customer service department. You can often find FAQs, additional resources, and contact information on their websvetainę.
Note: Always provide your product model (SLC10S) and any relevant purchase details when seeking support.
