„Hilti GX120“ dujinio tvirtinimo įrankio naudotojo vadovas

1. Įvadas

This manual provides essential information for the safe and effective operation, setup, and maintenance of the Hilti GX120 Gas-Actuated Fastening Tool. The Hilti GX120 is a fully automatic, gas-powered fastening tool designed for high mobility and consistent fastening performance. It is suitable for attaching drywall track to concrete, concrete block, and steel surfaces. Please read this manual thoroughly before using the tool.

2. Saugos informacija

Naudodami elektrinius įrankius, visada teikite pirmenybę saugai. Nesilaikant saugos nurodymų, galite sunkiai susižaloti arba sugadinti turtą.

Asmeninės apsaugos priemonės (AAP): Always wear appropriate PPE, including safety glasses, hearing protection, and gloves, when operating the tool.
Darbo sritis: Ensure the work area is clear of bystanders, well-lit, and free from obstructions.
Įrankio patikrinimas: Before each use, inspect the tool for any damage, loose parts, or malfunctions. Do not use a damaged tool.
Dujų balionėlio tvarkymas: Handle gas canisters with care. Store them in a cool, well-ventilated area away from direct sunlight and ignition sources.
Tvirtinimo elementų pasirinkimas: Use only Hilti-approved fasteners and gas canisters compatible with the GX120.
Įrankio veikimas: Never point the tool at yourself or others. Keep hands and body parts away from the fastening point.
Priežiūra: Disconnect the gas canister and remove fasteners before performing any maintenance or cleaning.

3. Komponentai baigtiview

The Hilti GX120 consists of several key components that facilitate its operation. Understanding these components is crucial for proper use and maintenance.

3.1 paveikslas: Hilti GX120 Gas-Actuated Fastening Tool. This image displays the complete tool, highlighting its red and black casing, the gas canister compartment at the rear, the trigger handle, the magazine for fasteners, and the nosepiece where fasteners are driven.

Antgalis: The part of the tool that contacts the work surface and guides the fastener. It is adjustable for optimum fastening quality.
Žurnalas: Holds the strip of fasteners.
Gas Canister Compartment: Located at the rear, this houses the gas canister that provides the power for actuation.
Suaktyvinimas: Activates the fastening mechanism.
Rankena: Ergonomiškai sukurtas patogiam sukibimui ir valdymui.
Nail Punch Set: Included for specific applications.

4. Sąranka

Proper setup ensures efficient and safe operation of the Hilti GX120.

Insert Gas Canister: Open the gas canister compartment and insert a Hilti-approved gas canister. Ensure it is securely seated.
Load Fasteners: Insert a strip of compatible fasteners into the tool's magazine. Ensure the fasteners are correctly oriented and the strip feeds smoothly. The tool supports fastener lengths from 9/16 to 1-9/16 inches.
Adjust Tool Nose: Use the single lever on the tool nose to adjust its depth for the specific application and material. This adjustment is critical for achieving optimum fastening quality.
Maitinimas: The tool features an automatic electronic gas injection system. Ensure the tool is ready for operation as indicated by the tool's status lights (if applicable, refer to tool markings).

5. Naudojimo instrukcijos

Follow these steps for safe and effective operation of the Hilti GX120.

Prepare Work Surface: Ensure the surface is clean, dry, and free from debris. Mark fastening points as needed.
Pozicijos įrankis: Place the tool's nosepiece firmly and squarely against the work surface at the desired fastening point. Apply sufficient pressure to engage the safety mechanism.
Actuate Tool: Press the trigger to drive the fastener. The fully automatic electronic gas injection system will ensure consistent fastening.
Atleidimas ir perkėlimas: Release the trigger and lift the tool from the surface. Reposition for the next fastening point.
Monitor Gas and Fasteners: The tool can drive approximately 750 fasteners with a single gas can. Monitor gas levels and fastener supply to avoid interruptions.

Compatible Fastener Types: The Hilti GX120 uses fastener types X-EGN, X-GHP, and X-GN.

6. Priežiūra

Regular maintenance extends the life of your Hilti GX120 and ensures consistent performance.

Kasdienis valymas: After each use, clean the tool, especially the nosepiece and magazine area, to remove dust and debris. Use a dry cloth or brush.
Periodinis patikrinimas: Regularly inspect the tool for wear and tear, particularly the nosepiece, fasteners, and gas canister connections.
Saugykla: Store the tool in its case (included) in a dry, secure location away from extreme temperatures and unauthorized access. Remove the gas canister before long-term storage.
Profesionalus aptarnavimas: For complex repairs or internal cleaning, contact authorized Hilti service centers. Do not attempt to disassemble the tool beyond basic user-level maintenance.

7. Problemų sprendimas

This section addresses common issues you might encounter with the Hilti GX120.

Problema	Galima priežastis	Sprendimas
Įrankis neužsidega	Empty gas canister; No fasteners in magazine; Tool not pressed firmly against surface; Safety mechanism not engaged.	Replace gas canister; Load fasteners; Apply firm pressure to the nosepiece; Ensure safety mechanism is fully engaged.
Inconsistent fastening depth	Incorrect nosepiece adjustment; Worn nosepiece; Low gas pressure.	Adjust nosepiece depth; Inspect and replace worn nosepiece; Replace gas canister.
Fasteners jam in magazine	Damaged fasteners; Debris in magazine; Incorrect fastener type.	Remove jammed fasteners and inspect for damage; Clean magazine; Ensure correct fastener type is used.

8. Specifikacijos

Key technical specifications for the Hilti GX120 Gas-Actuated Fastening Tool.

Prekės modelio numeris: 274638
Prekės svoris: 16.86 svaro
Gaminio matmenys: 17 x 5.3 x 15.4 colio
Maitinimo šaltinis: Varomas dujomis
ttage: 110 Volts (for electronic ignition system, if applicable)
Tvirtinimo detalės ilgio diapazonas: 9/16 to 1-9/16 inch
Compatible Fastener Types: X-EGN, X-GHP, X-GN
Fasteners per Gas Can: Maždaug 750
Įtraukti komponentai: Tool, 1 GX 120 nail punch set, Z case

	Hilti GX 2 naudojimo instrukcija Šiame dokumente pateikiamos originalios dujinio tvirtinimo įrankio „Hilti GX 2“ naudojimo instrukcijos, kuriose aptariamos saugos gairės, naudojimo procedūros, techninės specifikacijos ir trikčių šalinimo patarimai profesionaliam naudojimui.
	„Hilti GX-IE“ ir „GX-IE XL“ dujinio tvirtinimo įrankio naudojimo instrukcijos Išsamios „Hilti GX-IE“ ir „GX-IE XL“ dujinių tvirtinimo įrankių naudojimo instrukcijos ir saugos vadovas. Sužinokite apie gaminio savybes, saugų naudojimą, priežiūrą ir trikčių šalinimą.
	„Hilti“ tiesioginio tvirtinimo technologijos vadovas, 2025 m.: profesionalus įrankių ir tvirtinimo detalių vadovas Šiame išsamiame „Hilti“ tiesioginio tvirtinimo technologijos vadove, 2025 m., pateikiama išsami informacija apie principus, įrankius (parakinis, dujinis, akumuliatorinis), tvirtinimo detales, saugos protokolus, atsparumą korozijai, pagrindinių medžiagų pasirinkimo aspektus ir profesionaliems statybos darbams skirtus pasirinkimo vadovus.
	Hilti GX 2 Bedienungsanleitung Betriebsanleitung für das Hilti GX 2 gasbetriebene Befestigungsgerät. Enthält Sicherheitshinweise, Produktinformationen und technische Daten für professionelle Anwendungen.
	„Hilti DX 450“ naudojimo instrukcijos ir saugos vadovas This manual provides essential operating instructions, safety precautions, maintenance guidelines, and technical specifications for the Hilti DX 450 powder-actuated fastening tool. Learn about safe handling, assembly, disassembly, operation, troubleshooting, and product compliance.
	HILTI DX 460 naudojimo instrukcija – profesionalus vinių kalimo pistoletas Išsamios profesionalaus HILTI DX 460 vinių kalimo pistoleto naudojimo instrukcijos ir naudotojo vadovas. Apima saugos gaires, technines specifikacijas, naudojimo, priežiūros ir trikčių šalinimo instrukcijas, skirtas profesionaliam statybinių tvirtinimo įrenginių montavimui.

HILTI GX120