3DR Solo Gimbal for GoPro HERO3+ and HERO4 Instruction Manual

Įvadas

The 3DR Solo Gimbal is designed to enhance the aerial photography and videography capabilities of the 3DR Solo drone when paired with a GoPro HERO3+ or HERO4 camera. This 3-axis gimbal provides advanced stabilization, ensuring smooth and fluid high-definition footage. It also integrates with the Solo drone's intelligence for automatic shot control, in-flight GoPro camera control, and charging, along with a long-range HD video feed. The gimbal stabilizes footage to within 0.1 degrees of pointing accuracy, offering precise camera movements.

Kas įtraukta

• 3DR Solo Gimbal device
• Atsuktuvas

Sąranka ir diegimas

Before installation, ensure both your 3DR Solo drone and GoPro camera have the latest software updates. Refer to the 3DR official websvetainę for drone software updates and GoPro.com or the GoPro mobile app for camera software updates. Proper software is essential for full functionality, including in-flight GoPro controls.

Gimbal Installation Procedure:

1. Remove Existing Mount: Use the provided screwdriver to loosen the three captive screws securing the fixed GoPro mount on your 3DR Solo drone. The screws are designed to remain attached to the plate.
2. Detach Mount: Gently lift and detach the fixed mount. Route the HDMI cable out of its opening.
3. Prepare Gimbal: Remove the foam insert from the new gimbal. Retain this foam for safe transport of the gimbal.
4. Prijunkite kabelius: Position the drone so the gimbal hole faces away from you. Carefully route the HDMI cable to avoid interference with the gimbal's pan motor. Plug the HDMI cable into the top port of the gimbal. Connect the gimbal control cable (a small wire inside the Solo) to the designated control port on the gimbal, ensuring the tab aligns with the hole for a secure fit.
5. Secure Gimbal: Work the gimbal into place, ensuring the two front tabs are properly seated. The gimbal should sit flush.
6. Priveržkite varžtus: Use the screwdriver to tighten the three screws. You may need to adjust the gimbal's orientation slightly to access each screw. Ensure all screws are snug.
7. Install GoPro Camera: Insert your GoPro HERO3+ or HERO4 camera into the gimbal. Ensure the camera is securely clipped into place with the clip over the front of the GoPro. Connect the HDMI cable from the gimbal to the GoPro's HDMI port for HD video feed.
8. Balance Weights (if applicable): If using a GoPro HERO3+ or HERO4 Silver, attach the appropriate balance weights (larger for HERO3+, smaller for HERO4 Silver) to the top and bottom of the gimbal as instructed in the included guide to ensure optimal balance. The HERO4 Black typically does not require additional weights.

Product Image: 3DR Solo Gimbal with GoPro

Image showing the 3DR Solo Gimbal with a GoPro HERO4 camera securely attached, illustrating the mounting mechanism and the camera's position within the gimbal.

Video: 3DR Solo - Gimbal Installation

Operating the 3DR Solo Gimbal

The 3DR Solo Gimbal integrates with the Solo drone's flight system, allowing for precise camera control and stabilization during flight. The gimbal enables access to GoPro controls directly from the Solo controller, facilitating remote start/stop of recording and photo capture.

Pagrindinės funkcijos:

• 3 ašių stabilizavimas: Maintains camera stability within 0.1 degrees of pointing accuracy, reducing shake and vibration in footage.
• In-Flight GoPro Control: Access GoPro camera functions directly from the Solo controller or companion app.
• GoPro Charging: The gimbal provides power to the GoPro camera, extending its operational time during flights.
• HD Video Feed: Transmits a high-definition video feed from the GoPro to your connected mobile device (smartphone/tablet) for real-time monitoring.
• Smart Shots: Utilizes Solo's intelligent flight modes (e.g., Cable Cam, Orbit) to achieve complex cinematic shots automatically.

Priežiūra

To ensure the longevity and optimal performance of your 3DR Solo Gimbal, follow these maintenance guidelines:

• Saugykla: Always use the foam insert when storing or transporting the gimbal to prevent damage to its delicate components.
• Valymas: Keep the gimbal and its connections clean and free from dust or debris. Use a soft, dry cloth for cleaning.
• Kabelio apžiūra: Periodically inspect all cables for any signs of wear, fraying, or damage. Damaged cables can affect performance and stability.
• Firmware atnaujinimai: Regularly check the 3DR official website for any new firmware updates for the gimbal and drone. Keeping software up-to-date ensures compatibility and performance improvements.
• Tvarkymas: Handle the gimbal with care. Avoid sudden impacts or excessive force, as this can damage the motors or internal sensors.

Trikčių šalinimas

If you encounter issues with your 3DR Solo Gimbal, consider the following:

• Kalibravimo problemos: If the drone repeatedly requests calibration or exhibits unusual flight behavior, it may indicate an issue with internal sensors (e.g., accelerometer). Contact 3DR support if persistent.
• Green Video Feed: A green video feed on your connected device typically indicates a problem with the video signal transmission from the gimbal to the device. Check HDMI cable connections and ensure the GoPro is properly seated. The actual recorded footage on the GoPro's SD card may still be fine.
• Shaky Footage: Jei footage is shaky even with the gimbal installed, ensure the gimbal is securely mounted and properly balanced (if using weights). Also, check drone propellers for damage or imbalance, as this can induce vibrations that the gimbal cannot fully compensate for.
• Nereaguojantys valdikliai: Verify all cable connections between the gimbal and the drone. Ensure both the drone and gimbal firmware are up-to-date.

For persistent issues, refer to the official 3DR support resources or contact their customer service.

Specifikacijos

Garantija ir palaikymas

This item is sold as brand new and unopened from the factory. If it is in non-working condition, please contact the manufacturer, 3DR, directly for warranty claims and support. Returns for non-working items are typically handled by the manufacturer under their warranty policy.

For official support and the latest software updates, please visit the 3DR official websvetainę.