1. Įvadas
The Kidde i12010SCO is a hardwired combination smoke and carbon monoxide alarm designed to provide protection from two hazards in a single unit. It features a 10-year sealed lithium battery backup, eliminating the need for battery replacement throughout the alarm's lifespan. This alarm utilizes intelligent sensor technology to offer a fast response to various fire types, including smoldering and fast-flaming fires, while also detecting carbon monoxide (CO) and reducing nuisance alarms.
Pagrindinės funkcijos:
- Dviguba apsauga: Detects both smoke and carbon monoxide.
- 10-Year Sealed Battery Backup: No battery replacement required for the life of the alarm.
- Voice Warning System: Verbally announces "Fire" or "Warning, Carbon Monoxide" to clearly identify the hazard.
- Jonizacijos jutimo technologija: Optimized for detecting fast-flaming fires.
- Tylos funkcija: Laikinai nutildo nepageidaujamus signalizacijos signalus maždaug 9 minutėms.
- Sujungiamas: Can connect with up to 24 compatible Kidde devices (18 initiating).
Figure 1: Kidde i12010SCO highlighting its 10-year battery and voice alarm capabilities.
2. Svarbi saugos informacija
WARNING: PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE INSTALLATION AND OPERATION. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN PROPERTY DAMAGE, INJURY, OR DEATH.
- Ši signalizacija skirta naudoti tik gyvenamosiose patalpose.
- Regularly test the alarm weekly by pressing the test/reset button.
- Nedažykite signalizacijos. Dažai gali užkimšti jutimo kameras ir sutrikdyti signalizacijos tinkamą veikimą.
- Nemontuokite vietose, kuriose yra itin aukšta temperatūra ar didelė drėgmė.
- Prieš montuodami ar atlikdami techninę priežiūrą, įsitikinkite, kad grandinės pertraukiklis yra IŠJUNGTAS.
3. Pakuotės turinys
Patikrinkite, ar jūsų pakuotėje yra šie daiktai:
- Kidde i12010SCO Combination Smoke and Carbon Monoxide Alarm
- Mounting Bracket
- Laidų laidai
- Diegimo vadovas ir vartotojo vadovas
2 pav.: priekis view of the Kidde i12010SCO alarm with its wiring harness.
4. Montavimas
This alarm is designed to be hardwired into a 120V AC circuit. It is recommended that a qualified electrician install this unit.
Diegimo žingsniai:
- Išjungti maitinimą: Before beginning installation, ensure the power to the circuit where the alarm will be installed is turned off at the main fuse or circuit breaker panel.
- Pašalinkite seną signalizaciją (jei taikoma): If replacing an existing alarm, carefully remove it from its mounting bracket and disconnect the wiring harness.
- Įdiekite montavimo laikiklį: Secure the new mounting bracket to the electrical box using the provided screws. Ensure the bracket is firmly attached.
- Prijunkite laidus: Connect the new wiring harness to the household wiring. Match the wire colors: black to black (hot), white to white (neutral), and red to red (interconnect, if applicable). Use wire nuts to secure connections. If not interconnecting, cap the red wire.
- Attach Alarm to Harness: Plug the alarm unit into the wiring harness.
- Signalizacijos montavimas: Sulygiuokite signalizaciją su tvirtinimo laikikliu ir pasukite pagal laikrodžio rodyklę, kol ji tvirtai užsifiksuos vietoje.
- Įjunkite atsarginę baterijos funkciją: Once the alarm is mounted, remove the battery activation tag (if present) to activate the sealed 10-year lithium battery backup.
- Atkurti maitinimą: Įjunkite maitinimą pagrindiniame saugiklyje arba grandinės pertraukiklio skydelyje.
- Bandomasis signalas: Press and hold the Test/Reset button for a few seconds until the alarm sounds and the voice announcement is heard.
Figure 3: Proper installation of the alarm on a ceiling.
Figure 4: The wiring harness for connecting the alarm to household electrical wiring.
Video 1: Official product video demonstrating the features and benefits of the Kidde Smoke and Carbon Monoxide Detector Alarm with Voice Warning.
5. Operacija
Voice Warning System:
The alarm provides clear voice announcements to distinguish between smoke and carbon monoxide hazards:
- Smoke Detected: The alarm will sound and announce "Fire! Fire!"
- Carbon Monoxide Detected: The alarm will sound and announce "Warning, Carbon Monoxide!"
Figure 5: Visual representation of the voice warning system for smoke and carbon monoxide.
Testavimo / atstatymo mygtukas:
- Testavimas: Press and hold the Test/Reset button to test the alarm's circuitry and voice announcement. The alarm will cycle through its warning sounds and voice messages.
- Iš naujo nustatoma: If the alarm is sounding due to a detected hazard, pressing the Test/Reset button will silence the alarm for a short period. If the hazard persists, the alarm will reactivate.
Tylos funkcija:
The Hush feature temporarily silences the alarm for approximately 9 minutes in case of a nuisance alarm (e.g., cooking smoke). To activate, press the Test/Reset button during an alarm. The alarm will enter Hush mode only if it is in an alarm state. After 9 minutes, the alarm will automatically reset and resume normal operation.
Figure 6: Location of the Test/Hush button on the alarm unit.
Sujungimas:
This alarm can be interconnected with up to 24 compatible Kidde devices, with a maximum of 18 initiating devices. When one interconnected alarm senses a hazard, all interconnected alarms will sound, providing early warning throughout your home.
Figure 7: The Smart Interconnect feature allows multiple alarms to communicate.
6. Priežiūra
Baterija:
The Kidde i12010SCO features a sealed 10-year lithium battery that does not require replacement. The alarm is designed to operate for 10 years from the date of activation. After 10 years, the unit should be replaced.
Signalizacijos valymas:
It is recommended to clean your alarm every six months to prevent dust and debris from interfering with its operation.
- Use a soft brush or a vacuum cleaner with a soft brush attachment to remove dust from the alarm's vents.
- Nenaudokite vandens, valiklių ar tirpiklių, nes jie gali pažeisti įrenginį.
7. Problemų sprendimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Signalizacija periodiškai čirškia | Low battery (after 10 years) or unit not properly seated. | Replace the entire alarm unit if it's past its 10-year life. Ensure the alarm is twisted securely onto its mounting bracket. |
| Nuisance alarms (false alarms) | Gaminimo metu susidarantys dūmai, garai, didelė drėgmė, dulkės arba vabzdžiai. | Use the Hush feature. Relocate the alarm if it's consistently exposed to nuisance sources. Clean the alarm regularly. |
| Bandymo metu neskamba aliarmas | No AC power, battery not activated, or faulty unit. | Check circuit breaker. Ensure battery activation tag is removed. If issues persist, replace the unit. |
8. Specifikacijos
| Funkcija | Specifikacija |
|---|---|
| Modelio numeris | i12010SCO |
| Maitinimo šaltinis | Hardwired (120 Volts AC) with 10-Year Sealed Lithium Battery Backup |
| Jutiklio tipas | Ionization (Smoke) & Electrochemical (CO) |
| Signalo tipas | Audible (85 dB at 10 feet) & Voice Warning |
| Darbinė temperatūra | 40 °F (4.4 °C) iki 100 °F (37.8 °C) |
| Darbinė drėgmė | 10%-85% non-condensing relative humidity (RH) |
| Matmenys | 5.5 x 1.5 x 5.5 colio |
| Prekės svoris | 12 uncijos (340 gramų) |
| Sujungiama tarpusavyje | Iki 24 „Kidde“ įrenginių (18 inicijuoja) |
Figure 8: Dimensions of the Kidde i12010SCO alarm.
9. Garantija ir palaikymas
Informacija apie garantiją:
Kidde offers a limited warranty for this product. Please refer to the warranty card included in your product packaging for specific terms and conditions, including the warranty period and coverage details. Keep your proof of purchase for warranty claims.
Klientų aptarnavimas:
For technical assistance, troubleshooting, or warranty inquiries, please contact Kidde Customer Support. Contact information can typically be found on the product packaging or on the official Kidde website. It is recommended to have your product model number (i12010SCO) and date of purchase available when contacting support.
Internetiniai ištekliai: For additional information, FAQs, and product registration, visit the official Kidde websvetainė: www.kidde.com
