1. Įvadas
This manual provides essential information for the proper installation, operation, and maintenance of your Datalogic QuickScan Lite QW2100 Bar Code Reader. The QW2100 is an entry-level linear imager designed for reading long, truncated 1D bar codes, commonly found in retail, light industrial, document processing, and office environments. Its ergonomic design ensures user comfort during daily operations.
Prieš naudodami įrenginį, atidžiai perskaitykite šį vadovą, kad užtikrintumėte saugų ir efektyvų veikimą.
2. Saugos informacija
Kad išvengtumėte sužalojimų ir įrenginio pažeidimų, laikykitės šių saugos priemonių:
- Nelaikykite prietaiso nuo ekstremalių temperatūrų, drėgmės ar tiesioginių saulės spindulių.
- Avoid dropping the device or subjecting it to severe impacts.
- Nebandykite atidaryti ar modifikuoti įrenginio. Visus techninės priežiūros darbus patikėkite kvalifikuotiems darbuotojams.
- Norėdami užtikrinti optimalų našumą, skenavimo langą laikykite švarų.
- Use only Datalogic-approved accessories and power supplies.
3. Pakuotės turinys
Patikrinkite, ar pakuotėje yra visi reikalingi daiktai:
- Datalogic QuickScan Lite QW2100 Bar Code Reader
- USB Cable (if USB interface model) or RS-232/Keyboard Wedge Cable
- Quick Start Guide (refer to this manual for full instructions)
- Optional: Stand (if purchased as a kit)
4. Produktas baigtasview
The Datalogic QuickScan Lite QW2100 features a compact and ergonomic design for comfortable handheld use. Key components include:
- Skenavimo langas: Emits the scan line and reads bar codes.
- Trigerio mygtukas: Activates the scanning process.
- Indikatorius LED: Provides feedback on scanning status (e.g., successful read, error).
- Cable Connector Port: For connecting the interface cable.
5. Sąranka
Follow these steps to set up your QW2100 Bar Code Reader:
- Prijunkite kabelį: Insert the appropriate interface cable (USB or RS-232/Keyboard Wedge) into the connector port at the base of the scanner. Ensure a secure connection.
- Prijungti prie pagrindinio įrenginio:
- USB sąsaja: Plug the USB connector into an available USB port on your computer or POS system. The operating system should automatically detect and install the necessary drivers.
- RS-232/Keyboard Wedge Interface: Connect the cable to the corresponding port on your host device. Configuration may be required using Datalogic Aladdin software or by scanning configuration bar codes (refer to the full programming manual for details).
- Maitinimas: The scanner typically powers on automatically once connected to the host device. The indicator LED may illuminate to confirm power.
- Optional Stand Setup: If using the optional stand, assemble it according to its instructions and place the scanner in the stand for hands-free operation.
For advanced configuration, such as changing symbologies or interface settings, refer to the Datalogic Aladdin Configuration Software or the comprehensive programming manual.
6. Naudojimo instrukcijos
To scan a bar code with your QW2100 reader:
- Tikslas: Point the scanning window of the reader at the bar code you wish to scan.
- Suaktyvinti: Press and hold the trigger button. A bright scan line will project from the scanning window.
- Nuskaityti: Position the scan line across the entire bar code. The QW2100 is designed for wide-angle scanning, making it effective for long or wide codes.
- Patvirtinimas: Upon a successful read, the scanner will emit an audible beep (if enabled) and the indicator LED will flash. Release the trigger button.
For optimal performance, ensure the bar code is clean and not excessively creased or damaged. Adjust the distance between the scanner and the bar code for the best read.
7. Priežiūra
Proper maintenance ensures the longevity and performance of your bar code reader:
- Skenavimo lango valymas: Naudokite minkštą, nepūkuotą audinį dampened with a mild, non-abrasive cleaner (e.g., glass cleaner) to gently wipe the scanning window. Avoid harsh chemicals or abrasive materials that could scratch the surface.
- C valymasasing: Nuvalykite išorę casing su minkštu, damp audinys.
- Kabelio apžiūra: Regularly check the interface cable for any signs of damage, fraying, or loose connections. Replace damaged cables immediately.
- Saugykla: Kai nenaudojate, laikykite skaitytuvą švarioje, sausoje vietoje, apsaugotoje nuo tiesioginių saulės spindulių ir ekstremalių temperatūrų.
8. Problemų sprendimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Skaitytuvas neįsijungia. | Cable not connected properly or host device not providing power. | Ensure the cable is securely connected to both the scanner and the host device. Try a different USB port or host device. |
| Scanner does not read bar codes. |
|
|
| Scanner reads intermittently. | Damaged cable or loose connection. | Check the cable for damage and ensure connections are secure. Replace cable if necessary. |
9. Specifikacijos
| Funkcija | Detalė |
|---|---|
| Modelio numeris | QW2120-BK |
| Prekės ženklas | Datalogic |
| Ryšio technologija | USB Cable (also available in RS-232/Keyboard Wedge) |
| Maitinimo šaltinis | AC (via host device USB or external power supply for RS-232) |
| Nuskaitymo greitis | 400 nuskaitymų per sekundę |
| Gaminio matmenys (I x P x A) | 6.69 x 2.56 x 2.76 colio (17 x 6.5 x 7 cm) |
| Prekės svoris | 4.2 uncijos |
| Spalva | Juoda |
| Palaikomos simbolikos | Most standard 1D bar codes (e.g., EAN/UPC, Code 39, Code 128, Interleaved 2 of 5, etc.) |
10. Garantija ir palaikymas
Datalogic products are designed and manufactured to the highest quality standards. For warranty information, please refer to the warranty card included with your product or visit the official Datalogic websvetainę.
For technical support, product registration, or to download the latest drivers and software (such as Datalogic Aladdin Configuration Software), please visit the Datalogic support portal or contact your local Datalogic representative.
Websvetainė: www.datalogic.com
