„Amazon Basics“ 8 lapų kryžminio pjaustymo popieriaus ir kreditinių kortelių smulkintuvas

Įvadas

Ačiū, kad pirkoteasing the Amazon Basics 8-Sheet Cross-Cut Paper and Credit Card Shredder. This device is designed to securely dispose of sensitive documents and credit cards, turning them into small, unreadable pieces. For optimal performance and safety, please read this manual thoroughly before operation and retain it for future reference.

Priekyje view of the Amazon Basics 8-Sheet Cross-Cut Shredder, showcasing its compact design and clear viewlangas.

Saugos informacija

ĮSPĖJIMAS: GAISRO PAVOJUS

• Nepurkškite ir nelaikykite jokių aerozolinių produktų smulkintuve ar aplink jį.
• Do not shred items like metallic credit cards, as this can damage the shredder and pose a fire risk.
• Laikykite laisvus drabužius, papuošalus, plaukus ir rankas atokiai nuo popieriaus įvedimo angos.
• Vaikus ir gyvūnus laikykite toliau nuo smulkintuvo.
• Always unplug the shredder when not in use or before cleaning.

Sąranka

1. Unpack the shredder and ensure all components are present: shredder head and waste bin.
2. Pastatykite šiukšliadėžę ant lygaus, stabilaus paviršiaus.
3. Carefully place the shredder head onto the waste bin, ensuring it is properly aligned and securely seated. The misaligned indicator light will turn off when correctly positioned.
4. Prijunkite maitinimo laidą į standartinį elektros lizdą.

The shredder is designed to fit conveniently in a home or office environment.

Naudojimo instrukcijos

The shredder features a 4-mode control switch and LED status indicators for ease of use.

Close-up of the shredder's control panel, showing the mode switch and indicator lights.

Control Switch Modes:

• IŠJUNGTA (O): Išjungia smulkintuvą.
• ATVIRKŠTINĖ (<<): Reverses the shredding mechanism to clear paper jams.
• AUTO/ON (I): The shredder automatically starts when paper is inserted and stops when shredding is complete. This is the recommended mode for normal operation.
• Į PRIEKĮ (>>): Manually engages the shredding mechanism to push paper through.

Dokumentų naikinimas:

1. Nustatykite valdymo jungiklį į AUTO/ON (I). The 'Power On' indicator light will illuminate.
2. Insert up to 8 sheets of 20-pound bond paper into the 8.7-inch-wide paper entry slot. The shredder can also handle staples and small paper clips.
3. For credit cards, insert one card at a time into the dedicated slot.
4. The shredder will automatically begin shredding. Once complete, it will stop.

A user demonstrating the insertion of paper into the shredder's entry slot.

Veikimo laikas:

The shredder has a maximum run time of 3 minutes on, followed by a 30-minute cool-down period. Thermal protection and auto shut-off features are included to prevent overheating. If the 'Overheat' indicator light illuminates, allow the shredder to cool down for 30 minutes before resuming operation.

Priežiūra

Šiukšlių dėžės ištuštinimas:

The shredder features a clear window on the front of the bin, allowing you to monitor the shredded paper level. When the bin appears full:

1. Nustatykite valdymo jungiklį į IŠJUNGTA (O) and unplug the shredder from the power outlet.
2. Lift the shredder head off the waste bin using the integrated handle.
3. Empty the shredded contents from the 4.1-gallon bin into a trash receptacle.
4. Tvirtai uždėkite smulkintuvo galvutę ant šiukšliadėžės.
5. Plug the shredder back into the power outlet.

The shredder's viewing window allows for easy monitoring of the waste bin's fill level.

Trikčių šalinimas

Refer to the indicator lights on the control panel for common issues:

• Misaligned Light: Indicates the shredder head is not properly seated on the waste bin. Lift and re-seat the shredder head until the light turns off.
• Perkrovos lemputė: Indicates too many sheets of paper were inserted. Use the REVERSE (<<) mode to clear the jam, remove some sheets, and re-insert a smaller quantity.
• Overheat Light: Indicates the shredder has exceeded its maximum run time or is too hot. Unplug the shredder and allow it to cool down for 30 minutes.
• Įjungimo lemputė: Rodo, kad smulkintuvas įjungtas ir paruoštas darbui.

Dėl išsamesnės trikčių šalinimo kreipkitės į oficialų Trikčių šalinimo vadovas (PDF).

Specifikacijos

Garantija ir palaikymas

Dėl garantijos informacijos kreipkitės į oficialią Garantija (PDF) dokumentas.

Dėl klientų aptarnavimo ir palaikymo kreipkitės: 1-844-303-4344.