Everbilt 1-1/2 Hp Thermoplastic Sprinkler Pump User Manual

1. Įvadas

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Everbilt 1-1/2 Hp Thermoplastic Sprinkler Pump. This high-capacity pump is engineered to boost water pressure from city water sources or draw water from lakes and streams for various sprinkling and irrigation applications. It features a robust 1-1/2 HP dual voltage motor and a corrosion-resistant thermoplastic construction, ensuring durability and reliable performance. The pump is self-priming after its initial fill with water, simplifying setup.

Image 1.1: The Everbilt 1-1/2 Hp Thermoplastic Sprinkler Pump, showcasing its compact design and durable thermoplastic housing.

2. Saugos informacija

Read and understand all safety warnings and instructions before installing or operating this pump. Failure to follow these instructions can result in electric shock, fire, serious injury, or death.

• Elektros sauga: Always disconnect power before servicing the pump. Ensure the pump is properly grounded. All electrical wiring should be performed by a qualified electrician and comply with local codes. Do not operate the pump with a damaged cord or plug.
• Vandens sauga: Never run the pump dry, as this can cause severe damage. Protect the pump and plumbing from freezing temperatures to prevent cracking and leaks.
• Bendra sauga: Wear safety glasses when working with the pump. Keep children and unauthorized persons away from the operating area. Do not use this pump for flammable or corrosive liquids.

3. Pakuotės turinys

Išpakuodami patikrinkite, ar yra visi komponentai ir ar jie nepažeisti. Pakuotėje turi būti:

• Everbilt 1-1/2 Hp Thermoplastic Sprinkler Pump (1 unit)
• Vartotojo vadovas (šis dokumentas)

4. Sąranka

Tinkamas siurblio montavimas yra labai svarbus jo veikimui ir ilgaamžiškumui.

4.1 Vieta

• Install the pump on a firm, level surface to minimize vibration.
• Choose a location that is protected from direct sunlight, rain, and freezing temperatures.
• Ensure adequate ventilation around the motor for cooling.

4.2 Piping Connections

• Use appropriate pipe sizes for the inlet and outlet to ensure optimal flow and prevent cavitation.
• Apply thread sealant to all pipe connections to prevent air leaks, especially on the suction side.
• Install a foot valve with a strainer on the end of the suction line if drawing water from a lake or stream to prevent debris from entering the pump and to maintain prime.
• Install a check valve on the discharge side if necessary to prevent backflow.

4.3 Elektros prijungimas

• The pump features a dual voltage motor (115V or 230V). Ensure the motor is wired for the correct voltage supply available. Refer to the motor's wiring diagram for specific instructions.
• Prijunkite siurblį prie specialios, tinkamai apsaugotos elektros grandinės.
• Įsitikinkite, kad siurblys yra tinkamai įžemintas, kad išvengtumėte elektros smūgio pavojaus.

4.4 Siurblio užpildymas

Before initial operation, the pump must be primed:

1. Remove the priming plug located on top of the pump casing.
2. Užpildykite siurblį casing completely with water until it overflows.
3. Tvirtai įsukite užpildymo kamštį.
4. Ensure all valves on the suction and discharge lines are open.

5. Naudojimo instrukcijos

Įrengus ir užpildžius, siurblys yra paruoštas darbui.

5.1 Siurblio paleidimas

1. Verify that all connections are tight and there are no visible leaks.
2. Ensure the suction line is submerged in water (if drawing from a source) and the discharge line is open.
3. Turn on the electrical power to the pump. The pump should start and begin moving water.
4. Monitor the pump for the first few minutes of operation for any unusual noises or vibrations.

5.2 Siurblio sustabdymas

To stop the pump, simply turn off the electrical power supply.

6. Priežiūra

Reguliarus siurblio aptarnavimas užtikrina optimalų veikimą ir prailgina jo tarnavimo laiką.

6.1 Reguliarūs patikrinimai

• Periodically inspect the pump and piping for any signs of leaks, corrosion, or damage.
• Clean any debris from the suction strainer (if applicable) to maintain proper flow.
• Ensure the motor's ventilation openings are clear of obstructions.

6.2 Pasiruošimas žiemai (šaltam klimatui)

If the pump will be exposed to freezing temperatures, it must be drained to prevent damage:

1. Atjunkite maitinimą nuo siurblio.
2. Remove the drain plug(s) from the pump casing and any low points in the piping system.
3. Leiskite visam vandeniui visiškai nutekėti.
4. Store the pump in a dry, protected area if possible, or ensure all plugs are reinstalled loosely to allow for air circulation.

7. Problemų sprendimas

Šiame skyriuje pateikiami dažniausiai pasitaikančių problemų, su kuriomis galite susidurti, sprendimai.

8. Specifikacijos

Technical details for the Everbilt 1-1/2 Hp Thermoplastic Sprinkler Pump.

• Gamintojas: Everbiltas
• Modelio numeris: EFLS15-HD
• Dalies numeris: EFLS15-HD
• Spalva: Juoda
• Stilius: Virš žemės
• Medžiaga: Plastikas, polipropilenas (PP)
• Maitinimo šaltinio tipas: AC/DC
• ttage: 115 Volts (AC) / 230 Volts (AC) (Dual Voltage)
• Arklio galia: 1-1/2 AG
• Siurbimo talpa: Iki 4020 GPH (galonų per valandą)
• Maximum Lifting Height (Suction Depth): Iki 20 pėdų
• Prekės pakuotės kiekis: 1
• Prekės svoris: 19.5 kg
• Gaminio matmenys: 76.2 x 40.64 x 40.64 cm (ilgis x plotis x aukštis)
• UPC: 856594003961
• Pirmą kartą pasiekiama data: 22 m. birželio 2015 d

9. Garantija ir palaikymas

For warranty information, technical support, or replacement parts, please contact Everbilt customer service. Keep your purchase receipt as proof of purchase for any warranty claims. Detailed contact information can typically be found on the product packaging or the official Everbilt websvetainę.