Aqualux NE4382

Aqualux Pool Blaster Max Li User Manual

Modelis: NE4382

1. Įvadas

Thank you for choosing the Aqualux Pool Blaster Max Li. This cordless electric vacuum cleaner is designed for efficient and convenient cleaning of pools and spas. Its powerful suction and battery operation allow for thorough cleaning without the need for hoses or external power sources. Please read this manual carefully before operating the device to ensure proper use and maintenance.

2. Saugos informacija

3. Pakuotės turinys

Patikrinkite, ar pakuotėje yra visi reikalingi daiktai:

4. Produktas baigtasview

Familiarize yourself with the main components of your Pool Blaster Max Li.

Aqualux Pool Blaster Max Li main unit

Figure 4.1: The Aqualux Pool Blaster Max Li cordless vacuum cleaner, showing its ergonomic design and attachment points.

The unit consists of the main body housing the motor and battery, a removable filter bag compartment, and an adjustable wide head for efficient debris collection. The charging port is located on the main body.

5. Sąranka ir įkrovimas

5.1. Akumuliatoriaus įkrovimas

Before first use, fully charge the battery. The charging port is designed for secure connection.

Close-up of the charging port on the Pool Blaster Max Li

Figure 5.1: Detail of the charging port on the vacuum unit.

Hand connecting charger to Pool Blaster Max Li

Figure 5.2: Connecting the charger to the Pool Blaster Max Li. Ensure a firm connection.

  1. Locate the charging port on the vacuum unit.
  2. Prijunkite įkroviklio laidą prie prievado.
  3. Įjunkite įkroviklį į standartinį elektros lizdą.
  4. Allow 8-10 hours for a full charge. The indicator light on the charger will change when charging is complete (refer to charger instructions for specific light behavior).

5.2. Surinkimas

  1. Insert the reusable filter bag into its designated compartment. Ensure it is securely seated.
  2. Attach the adjustable wide head to the front of the vacuum unit. It should click into place.
  3. If using with a telescopic pole, attach the pole adapter to the vacuum unit, then slide your standard telescopic pole into the adapter.

6. Operacija

The Pool Blaster Max Li is designed for easy underwater operation.

Pool Blaster Max Li cleaning pool floor

Figure 6.1: The vacuum unit submerged and actively cleaning the pool floor.

Pool Blaster Max Li collecting debris underwater

Figure 6.2: The vacuum effectively collecting various debris from the pool bottom.

Pool Blaster Max Li in action, showing water flow

Figure 6.3: The vacuum in operation, demonstrating the water flow and suction capability.

  1. Įsitikinkite, kad akumuliatorius yra visiškai įkrautas.
  2. Submerge the vacuum unit completely in the water. Ensure no air is trapped inside.
  3. Turn on the unit using the power switch (location may vary, typically near the handle).
  4. Slowly guide the vacuum across the pool or spa surfaces you wish to clean. Overlap passes to ensure complete coverage.
  5. The vacuum will collect debris into the filter bag. Monitor the suction power; if it decreases, the filter bag may need emptying.
  6. After cleaning, turn off the unit before removing it from the water.
  7. Remove the unit from the water and immediately proceed to maintenance.

7. Priežiūra

Regular maintenance ensures optimal performance and extends the life of your Pool Blaster Max Li.

7.1. Cleaning the Filter Bag

The filter bag should be cleaned after each use or when suction power diminishes.

  1. Remove the filter bag from the vacuum unit.
  2. Empty collected debris into a waste receptacle.
  3. Rinse the filter bag thoroughly with a garden hose or under a faucet until clean.
  4. Allow the filter bag to air dry completely before storing or reinserting.

7.2. Unit Cleaning and Storage

8. Problemų sprendimas

ProblemaGalima priežastisSprendimas
Dulkių siurblys neįsijungia.Baterija neįkraunama.Įkraukite akumuliatorių 8-10 valandas.
Maitinimo jungiklis išjungtas.Įsitikinkite, kad maitinimo jungiklis yra „ĮJUNGTA“ padėtyje.
Maža siurbimo galia.Filtro maišelis pilnas arba užsikimšęs.Empty and clean the filter bag thoroughly.
Debris lodged in suction intake.Turn off the unit and remove any obstructions from the intake.
Akumuliatoriaus įkrova žema.Įkraukite akumuliatorių.
Įrenginys sustoja veikimo metu.Baterija išsikrovusi.Įkraukite akumuliatorių.
Suaktyvinta apsauga nuo perkaitimo.Turn off the unit, remove from water, and allow it to cool down for 30 minutes before restarting. Ensure it is fully submerged during operation.

9. Techninės specifikacijos

10. Garantija ir klientų aptarnavimas

For warranty information or customer support, please refer to the documentation provided with your purchase or contact Aqualux customer service through their official websvetainėje arba įgaliotuose mažmeninės prekybos vietose. Išsaugokite pirkimo įrodymą, jei prireiktų garantijos.

Susiję dokumentai - NE4382

Preview Aqualux Solar Pool Cover: User Instructions, Features, and Warranty
Comprehensive user instructions, technical specifications, features, usage tips, and warranty information for Aqualux Solar Pool Covers, available in 400 and 500 micron thicknesses. Includes guidance on installation, maintenance, and storage.
Preview AQUALUX™ pigmento koncentratas M, juodas – saugos duomenų lapas
AQUALUX™ pigmento koncentrato M juodos spalvos saugos duomenų lapas. Pateikiama informacija apie identifikavimą, pavojus, sudėtį, pirmąją pagalbą, gaisro gesinimą, priemones atsitiktinio išsiliejimo atveju, tvarkymą, sandėliavimą, poveikio kontrolę, fizines ir chemines savybes, stabilumą, toksikologiją, ekologiją, šalinimą, transportavimą ir reglamentavimo informaciją.
Preview AQL-402 dvigubas reguliuojamas paviršinis šviestuvas – „Aqualux“ garantija ir specifikacijos
Išsamios „Aqualux AQL-402“ dvigubo reguliuojamo paviršinio šviestuvo specifikacijos ir išsami garantijos informacija. Įskaitant gaminio kodą, medžiagas, IP apsaugos klasę, konfigūruojamas parinktis, garantijos sąlygas, įrengimo reikalavimus ir pretenzijų pateikimo procedūras.
Preview Aqualux AQL-882 Surface Mount Up/Downlight - Architectural & Commercial Lighting
Discover the Aqualux AQL-882, a highly configurable surface mount up/downlight for architectural and commercial spaces. Featuring advanced control gear options, premium optics, and durable CNC machined aluminium construction. Designed and manufactured in Australia.
Preview „Aqualux“ berėmė 6 mm šoninė panelė stumdomoms durims – gaminio specifikacijos
Išsamios „Aqualux“ berėmės 6 mm šoninės plokštės stumdomoms durims specifikacijos, įskaitant matmenis, savybes ir galimus dydžius. Patobulinkite savo modernų vonios kambario dizainą su šia aukštos kokybės dušo kabina.
Preview Liner Overlap de Remplacement pour Piscine Hors Sol Acier - AQUALUX
Découvrez le liner overlap de remplacement AQUALUX, l'option idéale pour rénover votre piscine hors sol en acier. Facile à installer, résistant et esthétique, disponible en plusieurs dimensions.