WORX WG518 12 Amp 2-Speed Electric Leaf Blower/Mulcher/Vacuum Instruction Manual

Produktas baigtasview

The WORX WG518 is a versatile 3-in-1 electric tool designed for efficient yard maintenance, functioning as a leaf blower, mulcher, and vacuum. It features a powerful 12 Amp motor and a durable metal impeller for effective debris management.

Pagrindinės funkcijos:

• 250 MPH Air Speed: Provides strong airflow for clearing debris.
• 2992.2 GAL/MIN Air Flow: High volume airflow for quick cleanup.
• AC Supply Handheld: Corded electric operation ensures continuous power without battery limitations.
• 16:1 Mulch Ratio: Efficiently reduces leaves and debris into fine particles, maximizing collection bag capacity.
• Lengvas ir paprastas naudoti: Sukurta patogiam naudojimui ilgalaikio naudojimo metu.
• 2-Pin Power Plug & Cord Retainer: Compatible with extension cords (sold separately) and features a retainer to prevent accidental disconnection.
• Reguliuojamas greitis: Two-speed settings for versatility in various tasks.

Sąranka ir surinkimas

The WORX WG518 is designed for easy assembly and conversion between its functions. Follow these steps for initial setup and mode switching.

Converting to Vacuum/Mulcher Mode:

1. Įsitikinkite, kad įrenginys yra atjungtas nuo maitinimo šaltinio.
2. Attach the vacuum tube to the main unit's intake port. Ensure it clicks securely into place.
3. Connect the leaf collection bag to the exhaust port. The bag typically attaches with a quick-release mechanism. Ensure it is firmly attached to prevent debris leakage.
4. Adjust the mode selector switch to the "Vacuum" position.

Image: The WORX WG518 unit configured for vacuuming, showing the main body, vacuum tube, and attached collection bag.

Converting to Blower Mode:

1. Įsitikinkite, kad įrenginys yra atjungtas nuo maitinimo šaltinio.
2. Remove the leaf collection bag and the vacuum tube.
3. Attach the blower nozzle to the unit's exhaust port. Ensure it is securely fastened.
4. Place the fan cover over the intake port (where the vacuum tube was attached) to prevent debris from entering the impeller during blowing.
5. Adjust the mode selector switch to the "Blower" position.

Image: The WORX WG518 unit configured for blowing, showing the main body with the blower nozzle attached and the intake port covered.

Naudojimo instrukcijos

Before operating, ensure all attachments are securely in place and the unit is properly connected to a suitable extension cord (120V AC supply). Always wear appropriate personal protective equipment, including safety glasses and hearing protection.

Powering On and Speed Control:

• Connect the 2-pin power plug to a compatible extension cord. Use the cord retainer to prevent accidental disconnection.
• The unit features a 2-speed switch. Slide the switch to position 'I' for low speed or 'II' for high speed.
• To turn off the unit, slide the switch to position '0'.

Using as a Leaf Blower:

• With the blower nozzle attached, direct the airflow towards leaves and debris to clear surfaces like driveways, patios, or lawns.
• Use the lower speed setting for delicate areas or light debris, and the higher speed for heavier or stubborn piles.

Image: An individual operating the WORX WG518 in blower mode, directing airflow to clear leaves from a paved area.

Using as a Mulcher/Vacuum:

• With the vacuum tube and collection bag attached, guide the vacuum tube over leaves and small debris. The unit will suck them up and mulch them into the bag.
• Avoid vacuuming large sticks, rocks, or wet, heavy debris to prevent clogging or damage to the impeller.
• Monitor the collection bag and empty it when full to maintain optimal suction and prevent strain on the motor. The bag typically has a zipper for easy emptying.

Image: The WORX WG518 unit in vacuum mode, showing the attached collection bag and the power cord connected, ready for operation.

Priežiūra

Regular maintenance ensures the longevity and optimal performance of your WORX WG518. Always unplug the unit before performing any maintenance.

• Sparnuotės valymas: Periodically check the impeller area for any lodged debris, especially after vacuuming. Remove the vacuum tube and fan cover, and carefully clear any obstructions.
• Surinkimo maišelio priežiūra: Empty the collection bag regularly. If the bag becomes dirty, it can be cleaned with mild soap and water, then air-dried completely before reattaching.
• Bendras valymas: Nuvalykite įrenginio išorę su skelbimuamp audinys. Nenaudokite stiprių cheminių medžiagų ar abrazyvinių valiklių.
• Laido patikrinimas: Regularly inspect the power cord and extension cord for any signs of damage, cuts, or fraying. Replace damaged cords immediately.

Trikčių šalinimas

If you encounter issues with your WORX WG518, refer to the following common troubleshooting tips:

• Įrenginys neįsijungia:
  • Ensure the power cord and extension cord are securely plugged into a working outlet.
  • Patikrinkite, ar maitinimo jungiklis yra „ĮJUNGTA“ padėtyje.
  • Verify that the fan cover (in blower mode) or vacuum tube (in vacuum mode) is correctly installed and the safety interlocks are engaged.
• Reduced Suction/Blowing Power:
  • Check the collection bag for fullness and empty if necessary.
  • Inspect the vacuum tube, blower nozzle, and impeller area for clogs. Clear any obstructions carefully after unplugging the unit.
  • Ensure all attachments are securely connected.
• Unit Clogs Frequently:
  • Avoid vacuuming wet, heavy leaves or large debris or sticks and rocks.
  • Rake leaves into smaller, manageable piles before vacuuming.
  • Clean the impeller regularly, especially after processing damp medžiaga.

Specifikacijos

Garantija ir palaikymas

WORX products are developed with a focus on sustainability, innovation, and customer benefit. The WORX WG518 comes with a 3 metų ribota įrankių garantija. For detailed warranty information, product registration, or technical support, please refer to the official WORX websvetainėje arba susisiekite su klientų aptarnavimo tarnyba.

Norėdami gauti daugiau pagalbos, apsilankykite WORX parduotuvė.