Profesionalus elektros bandymo rinkinys „Power Probe PPROKIT01“ Vartotojo vadovas

1. Baigėsiview

The Power Probe Professional Electrical Test Kit (PPROKIT01) is designed to provide comprehensive circuit testing and diagnostic capabilities. This kit includes the Power Probe III Circuit Tester and the CAT-IV 600V Hybrid Safe Digital Multimeter (PPDMM), along with various accessories to facilitate a wide range of electrical diagnostic tasks.

Power Probe Professional Electrical Test Kit PPROKIT01 components laid out

Figure 1.1: Power Probe Professional Electrical Test Kit PPROKIT01 with all components displayed.

Pagrindinės funkcijos:

Supplies Power and Ground for Functional Component Testing
CAT-IV 600V Hybrid Safe AC/DC Voltmeter
Measures Resistance to 60M Ohms
Measures Current from .001 Amps iki 10 Amps
Measures Temperatures from -4°F to 1832°F (-20°C to 1000°C)

2. Saugos informacija

Always observe the following safety precautions when using the Power Probe Professional Electrical Test Kit:

Dėvėkite tinkamas akių apsaugos priemones.
Nenaudokite įrankio, jei jis atrodo pažeistas.
Ensure proper insulation and avoid contact with live circuits.
Connect the tool to a power source within its specified voltage range (12V-24V DC for Power Probe III).
Venkite naudoti įrankį damp arba drėgnomis sąlygomis.
Refer to the vehicle's service manual for specific electrical system information.
Šiame gaminyje yra cheminių medžiagų, kurios Kalifornijos valstijoje žinomos kaip sukeliančios vėžį ir apsigimimus arba kitokią žalą reprodukcijai.

3. Pakuotės turinys

The Power Probe Professional Electrical Test Kit (PPROKIT01) includes the following items:

Power Probe III grandinės testeris
Power Probe Digital Multimeter (PPDMM)
Instruction Manuals for both devices
10 Amp Fuse (MMF1)
600A Fuse (PPF600)
Alligator Clip (X2) [PN024]
Probe Tip (PP3TIPBLU)
Battery Hookup (PP3EXT065)
4mm Male-Male Adapter (X2) [PNLS022]
10' Lead Black (PNLS060-BLK)
10' Lead Red (PNLS060-RED)
Test Leads for PPDMM (PPDMM-02)
K-Type Temp Probe (PPDMM-03)
AAA Batteries (3 for PPDMM)
AA Batteries (4 for Power Probe III)
Back Probe Adapter (AA5)

Power Probe Professional Electrical Test Kit PPROKIT01 inside its red carrying case

Figure 3.1: Kit contents organized within the protective carrying case.

4. Sąranka

4.1 Power Probe III Connection

To power the Power Probe III, connect its power leads to a 12V or 24V vehicle battery. The red lead connects to the positive (+) terminal, and the black lead connects to the negative (-) terminal.

Diagram showing Power Probe III connected to a car battery's positive terminal

Diagram showing Power Probe III connected to a car battery's negative terminal

Figure 4.1: Connecting the Power Probe III to a vehicle battery for power.

4.2 PPDMM Battery Installation

The PPDMM requires three AAA batteries for operation. Open the battery compartment on the back of the multimeter and insert the batteries according to the polarity indicators. Securely close the compartment.

5. Naudojimo instrukcijos

5.1 Using the Power Probe III

The Power Probe III allows for quick testing of electrical circuits by providing power or ground to components. Once connected to a vehicle battery, the tool's tip can be used to probe circuits. The display will show voltage skaitymai.

ttage Testavimas: Touch the probe tip to the circuit point. The LCD will display the voltage.
Power/Ground Supply: Use the rocker switch to apply battery voltage (forward) or ground (backward) to a component for functional testing. Atsargiai: Ensure the component can handle direct battery voltage or ground before applying.
Tęstinumo bandymas: With the tool powered, touch the probe tip to a ground source. If the circuit is continuous, the tool will indicate continuity.

Diagram showing Power Probe III testing a circuit with a light bulb

5.1 pav. Pvzample of using the Power Probe III to test a circuit.

5.2 Using the PPDMM Digital Multimeter

The PPDMM is a versatile multimeter for precise measurements of voltage, resistance, current, and temperature.

Priekyje view of the Power Probe Digital Multimeter (PPDMM)

Šoninė view of the Power Probe Digital Multimeter (PPDMM)

5.2 pav.: Priekinė ir šoninė dalys views of the PPDMM, highlighting its display and input jacks.

ttagMatavimas (kintamoji/nuolatinė):
1. Turn the rotary dial to the desired ACV or DCV range.
2. Connect the red test lead to the "VΩmA" jack and the black test lead to the "COM" jack.
3. Touch the probe tips to the circuit points to measure voltage.
Atsparumo matavimas:
1. Turn the rotary dial to the "Ω" (Ohms) range.
2. Connect the red test lead to the "VΩmA" jack and the black test lead to the "COM" jack.
3. Touch the probe tips to the component to measure resistance. Ensure the circuit is de-energized.
Dabartinis išmatavimas:
1. Turn the rotary dial to the "A" (Amps) range.
2. Connect the red test lead to the "10A" or "mA" jack (depending on expected current) and the black test lead to the "COM" jack.
3. Break the circuit and connect the multimeter in series with the circuit to measure current.
Temperatūros matavimas:
1. Turn the rotary dial to the "°C/°F" range.
2. Connect the K-Type temperature probe to the designated jacks.
3. Place the tip of the temperature probe on the surface or in the medium to be measured.

Person using the PPDMM to measure voltage on a car battery under the hood

Figure 5.3: PPDMM in use for automotive electrical diagnostics.

Person using both Power Probe III and PPDMM simultaneously for automotive testing

Figure 5.4: Combined use of Power Probe III and PPDMM for comprehensive testing.

6. Priežiūra

6.1 Valymas

Nuvalykite įrankius reklamaamp cloth. Do not use abrasive cleaners or solvents. Ensure the tools are dry before storage.

6.2 Akumuliatoriaus keitimas

Replace the AAA batteries in the PPDMM when the low battery indicator appears on the display. For the Power Probe III, ensure the vehicle battery connection is secure and providing adequate power.

6.3 Saugiklio keitimas

If the Power Probe III or PPDMM ceases to function due to an overload, check and replace the internal fuses as per the specific instructions in their individual manuals. Always use fuses of the correct rating.

7. Problemų sprendimas

Problema	Galima priežastis	Sprendimas
Power Probe III does not power on.	Incorrect battery connection; vehicle battery discharged; blown fuse.	Verify red lead to positive, black lead to negative. Check vehicle battery voltage. Patikrinkite ir, jei reikia, pakeiskite saugiklį.
PPDMM display is blank or dim.	Žemas arba išsikrovusios baterijos; neteisingas baterijų įdėjimas.	Replace AAA batteries. Ensure batteries are inserted with correct polarity.
Inaccurate readings on PPDMM.	Incorrect measurement range selected; poor test lead connection; damaged test leads.	Select appropriate range. Ensure test leads are securely connected. Inspect test leads for damage and replace if needed.
Power Probe III does not supply power/ground.	Blown internal fuse; insufficient power from vehicle battery.	Check and replace the internal fuse. Ensure the vehicle battery is fully charged.

8. Specifikacijos

Modelio numeris: PPROKIT01
Prekinis ženklas: Maitinimo zondas
Maitinimo šaltinis: Corded Electric (Power Probe III), Battery (PPDMM)
Baterijos: 3 AAA batteries required (included) for PPDMM. Power Probe III operates from vehicle 12V/24V DC.
Gaminio matmenys: 12 x 14 x 3 colio
Prekės svoris: 4.8 svaro
ttage Matavimas: CAT-IV 600V AC/DC
Atsparumo matavimas: Up to 60M Ohms
Dabartinis išmatavimas: 0.001 Amps iki 10 Amps
Temperatūros matavimas: -4°F iki 1832°F (nuo -20°C iki 1000°C)
Pirmą kartą pasiekiama data: 29 m. liepos 2015 d

9. Garantija ir palaikymas

For warranty information, technical support, or service inquiries, please refer to the specific warranty documentation included with your product or visit the official Power Probe websvetainėje. Išsaugokite pirkimo kvitą kaip pirkimo įrodymą.

Gamintojas: Maitinimo zondas

Susisiekite: Nurodykite Power Probe Store on Amazon or the official Power Probe webpalaikymo išteklių svetainė.

	Galios zondo PPDMM skaitmeninio multimetro naudotojo vadovas Išsamus skaitmeninio multimetro „Power Probe PPDMM“ naudotojo vadovas, kuriame išsamiai aprašomos jo savybės, specifikacijos, saugos priemonės ir naudojimo instrukcijos įvairiems matavimams.
	„Power Probe III S“ naudojimo instrukcija: išsamus grandinių testavimas Išsami „Power Probe III S“ (PP3S) naudojimo instrukcija, kurioje išsamiai aprašomos jo funkcijos, skirtos 12–24 V automobilių elektros sistemų diagnostikai, įskaitant prijungimą, savikontrolę, įtampos matavimą.tage and polarity testing, continuity checks, component activation, troubleshooting short circuits, and advanced operational modes.
	Power Probe III Instruction Manual: Ultimate Circuit Testing Guide Comprehensive guide to using the Power Probe III (PP3) for diagnosing 12-24V automotive electrical systems, including voltage testing, continuity, short circuit detection, and advanced modes. Learn how to activate components, test trailer lights, and troubleshoot electrical issues.
	„Power Probe“ pagrindinis naudotojo vadovas: automobilių grandinių bandymo vadovas „Power Probe Basic“ grandinės testerio naudotojo vadovas, kuriame išsamiai aprašomos jo funkcijos, saugos priemonės ir naudojimas automobilių elektros bandymams, tęstinumo patikrinimams ir komponentų aktyvavimui.
	Maitinimo zondo saugiklių monitoriaus naudotojo vadovas: savybės, veikimas ir specifikacijos Šiame naudotojo vadove pateikiama išsami informacija apie „Power Probe“ saugiklių monitorių, įskaitant jo funkcijas, naudojimo instrukcijas, būsenos indikatorius, įkrovimo būdus ir technines specifikacijas automobilių grandinių bandymui.
	„Power Probe III“ naudojimo instrukcija: automobilių grandinių bandymo vadovas Išsami „Power Probe III“ (PP3) naudojimo instrukcija, kurioje išsamiai aprašomos jo savybės, prijungimo procedūros, įvairūs testavimo režimai (tūristage, polarity, continuity, short circuit detection), specifications, and troubleshooting for automotive electrical systems. Includes guidance for professional automotive technicians.

Power Probe PPROKIT01