Įvadas
This manual provides essential information for the safe and effective use of your Tattu 11.1V 1800mAh 3S 45C LiPo Battery Pack. Tattu LiPo batteries are designed for high-performance applications, particularly in UAV and UAS markets, offering superior quality and reliability. Please read this manual thoroughly before using the battery.
Image: The Tattu 11.1V 1800mAh 3S 45C LiPo Battery Pack, featuring its black and orange label, XT60 connector, and balance lead.
Saugos informacija
WARNING: Lithium Polymer (LiPo) batteries are powerful and can be dangerous if not handled correctly. Failure to follow these instructions can result in fire, personal injury, and property damage.
- Nemeskite akumuliatoriaus į ugnį.
- Niekada nepalikite įkraunamų baterijų be priežiūros.
- Always charge LiPo batteries on a fire-resistant surface and away from flammable materials.
- Use only chargers specifically designed for LiPo batteries and ensure correct voltage and cell count settings.
- Do not overcharge or over-discharge the battery. Overcharging can lead to fire, and over-discharging can damage the battery.
- Do not puncture, disassemble, short circuit, or modify the battery.
- Baterijas laikykite vaikams ir naminiams gyvūnėliams nepasiekiamoje vietoje.
- If the battery swells, smokes, or gets excessively hot, immediately disconnect it and move it to a safe, non-flammable area.
- Store batteries in a cool, dry place, ideally in a LiPo-safe bag or container.
Kas yra dėžutėje
Your Tattu LiPo Battery Pack package includes:
- 1x Tattu 1800mAh 45C 3S1P LiPo Battery Pack with XT60 Plug
- Vartotojo vadovas (šis dokumentas)
Image: The Tattu LiPo battery alongside its black packaging box and a small instruction leaflet.
Sąranka
Pirminė apžiūra
Upon receiving your Tattu LiPo battery, carefully inspect it for any signs of damage, such as swelling, punctures, or damaged wires/connectors. If any damage is observed, do not use the battery and contact customer support.
Pirmasis mokestis
Before first use, it is recommended to fully charge the battery. Use a compatible LiPo balance charger. Connect the main XT60 plug to the charger's output and the JST-XH balance plug to the charger's balance port. Set your charger to the correct cell count (3S for this battery) and charging current (typically 1C, which is 1.8A for an 1800mAh battery). Always monitor the charging process.
Vaizdas: Stambus planas view of the Tattu LiPo battery's XT60 main connector, JST-XH balance connector, and internal cell configuration (3S1P).
Veikiantis
Prisijungimas prie įrenginio
Ensure your device (e.g., drone, RC vehicle) is powered off before connecting the battery. Connect the XT60 plug of the battery to the corresponding XT60 connector on your device. Ensure a secure connection.
Iškrovimo gairės
Avoid over-discharging your LiPo battery. The minimum safe voltage for a 3S LiPo battery is 3.0V per cell, or 9.0V total. It is highly recommended to stop using the battery when any cell reaches 3.5V-3.7V under load to prolong its lifespan. Over-discharging can permanently damage the battery and reduce its capacity.
Image: The Tattu LiPo battery centrally positioned, surrounded by various drone models it is compatible with, such as the Skylark M4-FPV250, Mini Shredder 200, and QAV250.
Priežiūra
Sandėliavimas
For long-term storage, charge or discharge the battery to its storage voltage, typically 3.8V-3.85V per cell (11.4V-11.55V for a 3S battery). Store the battery in a cool, dry place, away from direct sunlight and extreme temperatures. A LiPo-safe bag or fireproof container is recommended.
Balansavimas
Regularly balance charge your LiPo battery to ensure all cells maintain similar voltage levels. This is crucial for battery health and longevity.
Temperatūra
Avoid operating or charging the battery in extreme temperatures. Optimal operating temperature is between 0°C and 40°C (32°F and 104°F). Do not charge a cold battery; allow it to warm up to room temperature first.
Trikčių šalinimas
- Akumuliatorius neįkraunamas:
- Ensure all connections (main and balance leads) are secure.
- Verify charger settings match battery specifications (3S, LiPo mode).
- Patikrinkite, ar nėra matomų akumuliatoriaus ar įkroviklio pažeidimų.
- Reduced Flight/Run Time:
- Battery may be aging or has been over-discharged.
- Ensure battery is fully balance charged before use.
- Check for high internal resistance (if your charger can measure it), which indicates battery degradation.
- Baterijos patinimas:
- Immediately stop using and charging the battery.
- Move the battery to a safe, non-flammable location.
- Swelling indicates internal damage, often due to overcharging, over-discharging, or physical impact. The battery should be safely disposed of.
Specifikacijos
Detailed specifications for the Tattu 11.1V 1800mAh 3S 45C LiPo Battery Pack:
| Parametras | Vertė |
|---|---|
| Baterijos talpa | 1800 mAh |
| Baterijos tūristage | 11.1 V |
| Iškrovimo greitis | 45C |
| Ląstelės konfigūracija | 3S1P |
| Jungties tipas | XT60 Plug |
| Balancer Connector | JST-XH |
| Svoris | 158 g (5.6 uncijos) |
| Matmenys (L*P*A) | 106 x 35.5 x 21 mm (4.17 x 1.41 x 0.82 coliai) |
Image: A graphic displaying the key specifications of the Tattu 1800mAh LiPo battery, including capacity, voltage, discharge rate, cell configuration, connector types, and weight.
Image: A visual representation of the Tattu LiPo battery's dimensions, showing its length (107mm), width (35mm), and height (21mm), with a note about a ±3mm error tolerance.
Garantija ir palaikymas
Tattu products are manufactured to high standards. For specific warranty information or technical support, please refer to the official Tattu websvetainėje arba susisiekite tiesiogiai su jų klientų aptarnavimo tarnyba. Išsaugokite pirkimo kvitą kaip pirkimo įrodymą.
Daugiau informacijos galite rasti adresu Tattu Store on Amazon.
