FRYMASTER Computer Control Board User Manual

1. Produktas baigtasview

The Frymaster Computer Control Board, model 106-1149SP, is a replacement component designed for commercial deep fryers. This board serves as the central interface for managing fryer operations, including temperature control, cooking cycles, and error monitoring. It features a digital display and a keypad for precise input and feedback.

1.1 vaizdas: Priekyje view of the Frymaster Computer Control Board 106-1149SP. The board features a central digital display, a keypad with numerical buttons (0-9), and function keys for temperature and power control. It is designed for integration into a fryer's control panel.

2. Saugos informacija

Before installation or operation, read and understand all safety warnings and instructions. Failure to do so may result in property damage, injury, or death.

• Elektros pavojus: Always disconnect power to the fryer before installing, servicing, or removing the control board. Only qualified technicians should perform electrical work.
• Tinkamas montavimas: Ensure the control board is installed correctly and securely according to the fryer manufacturer's specifications.
• Komponentų suderinamumas: Use only genuine Frymaster replacement parts or approved equivalents.
• Veikimo aplinka: Do not expose the control board to excessive moisture, heat, or corrosive substances.

3. Sąranka ir diegimas

This section outlines the general steps for installing the control board. Refer to your specific fryer model's service manual for detailed instructions and wiring diagrams.

1. Maitinimo atjungimas: Turn off and unplug the fryer from its power source. Verify that all power is disconnected using a voltage metras.
2. Prieigos skydelio nuėmimas: Carefully remove the fryer's control panel or access cover to expose the existing control board.
3. Laidų atjungimas: Document or photograph all wiring connections to the old control board. Label wires if necessary. Disconnect all wires and connectors.
4. Old Board Removal: Atsukite arba atkabinkite seną valdymo plokštę nuo jos tvirtinimo laikiklių.
5. Naujos lentos montavimas: Position the new Frymaster 106-1149SP control board in place and secure it with the appropriate screws or clips.
6. Laidų prijungimas: Reconnect all wires and connectors to the new board, ensuring they match the documented configuration. Double-check all connections for security.
7. Skydelio pakartotinis montavimas: Replace the fryer's control panel or access cover.
8. Maitinimo prijungimas iš naujo: Plug the fryer back into its power source.
9. Pradinis bandymas: Power on the fryer and perform an initial functional test as per the fryer's service manual.

4. Naudojimo instrukcijos

The control board provides an intuitive interface for managing fryer operations. Specific programming and operational sequences may vary slightly depending on the fryer model and installed software version.

4.1. Pagrindinė operacija

• Maitinimo įjungimas/išjungimas: Use the designated power button (often indicated by a circle with a vertical line) to turn the fryer on or off.
• Temperatūros nustatymas: Press the temperature icon button (often a thermometer symbol) to enter temperature setting mode. Use the numerical keypad (0-9) to input the desired temperature. Press the checkmark or enter button to confirm.
• Kepimo ciklai: The numerical buttons (1-9) may correspond to pre-programmed cooking cycles or product buttons. Press the desired button to initiate a cooking cycle.
• Left/Right Frypot Control: If applicable, the 'L' and 'R' buttons allow selection of the left or right frypot for independent control.
• Laikmačio funkcija: Some models may integrate a timer function. Use the appropriate button (often a clock symbol) to set and start a timer.

4.2. Advanced Programming (Refer to Fryer Manual)

For advanced functions such as programming custom cooking cycles, calibration, or diagnostic modes, consult the specific Frymaster fryer operator's manual. These functions typically involve specific key combinations or sequences not detailed here.

5. Priežiūra

Regular maintenance ensures the longevity and proper functioning of the control board.

• Valymas: Wipe the control board's surface with a soft, damp cloth. Do not use abrasive cleaners, solvents, or excessive water, as these can damage the electronics.
• Patikra: Periodiškai apžiūrėkite plokštę, ar nėra kokių nors fizinių pažeidimų, atsilaisvinusių jungčių ar korozijos požymių.
• Vėdinimas: Ensure that the fryer's ventilation system is clear and functioning correctly to prevent overheating of internal components, including the control board.

6. Problemų sprendimas

This section provides solutions for common issues. For complex problems, contact a qualified service technician.

7. Specifikacijos

• Modelis: 106-1149SP
• Prekinis ženklas: Frymaster
• Tipas: Computer Control Board (Fryer)
• ASIN: B014TEKNEU
• Pirmas prieinamas: 2 m. rugsėjo 2015 d
• Suderinamumas: Designed for specific Frymaster commercial deep fryer models. Refer to your fryer's documentation for compatibility verification.

8. Garantija ir palaikymas

This Frymaster component is typically covered by the manufacturer's standard warranty for replacement parts. Warranty terms and duration may vary. Please retain your proof of purchase.

For warranty claims, technical support, or service inquiries, please contact Frymaster customer service or an authorized Frymaster service provider. You may need to provide the model number (106-1149SP) and the serial number of your fryer.

Pastaba: Unauthorized repairs or modifications may void the warranty and could lead to unsafe operating conditions.