1. Produktas baigtasview
The Tekmar 519 Radiant Thermostat is designed to control a single stage of heating within a hydronic system. This non-programmable thermostat offers a straightforward and efficient method for managing the temperature of a specific zone. It features auto cycling to optimize system performance and includes a 079 Slab Sensor for monitoring and protecting slab temperatures against extreme conditions.
1 paveikslas: The Tekmar 519 Radiant Thermostat, a white rectangular device with a digital display and control buttons.
2. Diegimas ir sąranka
Proper installation is crucial for the optimal performance of your Tekmar 519 thermostat. If you are unsure about any steps, it is recommended to consult a qualified HVAC technician.
2.1 Saugos priemonės
- Išjunkite maitinimą: Prieš montuodami arba atlikdami termostato techninę priežiūrą, visada atjunkite šildymo sistemos maitinimą pagrindiniu grandinės pertraukikliu.
- Elektros laidai: Įsitikinkite, kad visa laidų instaliacija atitinka vietinius elektros kodeksus.
- Venkite vandens: Do not install the thermostat in locations where it may be exposed to water or excessive humidity.
2.2 Termostato montavimas
- Remove the old thermostat (if applicable) and label the existing wires.
- Mount the Tekmar 519 base plate to a suitable indoor wall location, away from direct sunlight, drafts, or heat sources.
- Connect the wires to the appropriate terminals on the thermostat base plate. Refer to the wiring diagram provided with your product packaging for specific connections.
- Install the 079 Slab Sensor according to its specific instructions, ensuring it is properly placed to monitor slab temperature.
- Secure the thermostat faceplate onto the base plate.
2.3 Pradinis įjungimas ir konfigūravimas
- Atkurkite elektros tiekimą šildymo sistemai.
- The thermostat will power on and may display initial setup prompts.
- Follow the on-screen instructions to set the time, date, and any specific system parameters required for your hydronic setup.
3. Naudojimo instrukcijos
The Tekmar 519 is a non-programmable thermostat, offering simple and direct control over your heating system.
3.1 Temperatūros nustatymas
- Naudokite Up ir Žemyn arrow buttons on the thermostat to adjust the desired room temperature.
- The display will show the current room temperature and the setpoint.
3.2 Režimo pasirinkimas
The thermostat typically operates in a single heating mode. If other modes are available (e.g., Off), use the Režimas button to cycle through the options.
3.3 Auto Cycling Feature
The Tekmar 519 utilizes an auto cycling feature to calculate and execute the ideal number of heating cycles per hour. This helps to minimize short cycling, conserve energy, and reduce wear and tear on your heating system. This feature operates automatically in the background.
3.4 Slab Sensor Monitoring
The included 079 Slab Sensor continuously monitors the slab temperature to ensure it remains within safe operating limits and provides protection against extreme temperatures. This data is used by the thermostat to optimize radiant heating delivery.
4. Priežiūra
Reguliarus termostato valymas užtikrina jo ilgaamžiškumą ir efektyvumą.
- Valymas: Švelniai nuvalykite termostato išorę minkšta,amp audinys. Nenaudokite abrazyvinių valiklių ar tirpiklių.
- Baterijos keitimas: The thermostat may use batteries for backup power or primary operation. Refer to the product manual for your specific model's battery type and replacement instructions. Typically, a low battery indicator will appear on the display when replacement is needed.
- Metinė apžiūra: It is recommended to have your entire HVAC system, including the thermostat, inspected by a professional annually.
5. Problemų sprendimas
If you encounter issues with your Tekmar 519 thermostat, try the following steps:
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Nėra ekrano / Nėra maitinimo | No power to the thermostat; dead batteries. | Check the circuit breaker for your heating system. Replace batteries if applicable. |
| Šildymo sistema nereaguoja | Incorrect mode selected; wiring issue; system malfunction. | Ensure the thermostat is set to "Heat" mode. Verify wiring connections. Contact a professional if the issue persists. |
| Netikslus temperatūros rodmuo | Thermostat location affected by drafts/heat sources; sensor malfunction. | Ensure the thermostat is not in direct sunlight or near heat/cold sources. Check slab sensor connection. |
| Slab overheating/underheating | Slab sensor issue; system calibration needed. | Verify slab sensor placement and connection. Consult the full product manual or a professional for calibration. |
6. Specifikacijos
- Prekinis ženklas: Tekmaras
- Modelis: 519
- ttage: 24 voltų
- Valdymo tipas: Mygtukų valdymas
- Foninis apšvietimas: Taip
- Šiluma Stages: Vienas Stage Šiluma
- Included Sensor: 079 Slab Sensor
- Pirmą kartą pasiekiama data: 23 m. kovo 2012 d
7. Garantija ir palaikymas
For detailed warranty information and technical support, please refer to the official Tekmar documentation included with your product or visit the „Tekmar“ parduotuvė „Amazon“ platformoje arba jų pareigūnas websvetainę.
Rekomenduojama išsaugoti pirkimo kvitą kaip pirkimo įrodymą garantiniams reikalavimams.
8. Produktų vaizdo įrašai
Šiam produktui nėra oficialių pardavėjo vaizdo įrašų.
