TOPGREENER TSOS5-W sieninio PIR judesio jutiklio šviesos jungiklio naudotojo vadovas

1. Įvadas

The TOPGREENER TSOS5-W is an in-wall Passive Infrared (PIR) motion sensor light switch designed to automatically control lighting, fans, and motors based on occupancy detection. This single-pole switch requires a neutral wire for proper operation and offers AUTO, ON, and OFF modes for flexible control. It is suitable for various indoor applications, providing convenience and energy savings.

2. Svarbi saugos informacija

ĮSPĖJIMAS: To avoid fire, shock, or death, turn off power at the circuit breaker or fuse and test that the power is off before wiring. Installation should be performed by a qualified electrician or a person with electrical knowledge.

This device requires a neutral wire for installation. Verify the presence of a neutral wire in your electrical box before proceeding.
For single-pole use only. Do not use in 3-way or multi-way switch configurations.
Do not exceed the maximum load ratings: CFL/LED: 150W; Incandescent/Halogen: 500W; Motor: 1/8 HP; Fluorescent 500VA.
Įsitikinkite, kad visos laidų jungtys yra tvirtos ir tinkamai izoliuotos.
Naudoti tik patalpose.

3. Pakuotės turinys

TOPGREENER TSOS5-W Motion Sensor Switch
Vielos veržlės
Instrukcijų vadovas

Note: Wall plate sold separately.

4. Gaminio specifikacijos

Modelio numeris	TSOS5-W
ttage	120VAC
Apkrovos tipas	CFL/LED: 150W; Incandescent/Halogen: 500W; Motor: 1/8 HP; Fluorescent 500VA
Jutiklio tipas	PIR (pasyvus infraraudonųjų spindulių)
Laukas View	180 laipsnių
Aprėpties sritis	Iki 980 kv
Laiko delsimas	Adjustable: 15 sec (test mode), 10 min, 20 min, 30 min
Jautrumas	Adjustable: 30% to 100%
Reikalavimas laidams	Reikalingas neutralus laidas
Matmenys	5.1 x 3 x 2.2 colio
Svoris	4.97 uncijos (0.14 kilogramo)
Montavimo tipas	Embedded (In-Wall)

5. Montavimo instrukcijos

Prieš pradėdami: Ensure power is OFF at the circuit breaker. This device requires a neutral wire. If you are unsure about your wiring, consult a qualified electrician.

5.1 Sujungimo schema

The TSOS5-W switch has four wires for connection: Line (Hot), Load, Neutral, and Ground.

Juodas laidas: Connects to the Line (Hot) wire from the electrical box.
Raudonas laidas: Connects to the Load wire (to the light fixture/fan).
Balta viela: Connects to the Neutral wire from the electrical box.
Žalias laidas: Connects to the Ground wire from the electrical box.

Priekyje view of the TOPGREENER TSOS5-W motion sensor switch

1 pav.: priekis view of the TOPGREENER TSOS5-W motion sensor switch, showing the sensor lens and the OFF-AUTO-ON slider.

Diagram showing the internal components of the motion sensor switch, highlighting the PIR sensor, customizable controls, daylight detection, fault tolerance, and fire-resistant materials.

Figure 2: Internal components of the TSOS5-W, illustrating the PIR sensor, customizable controls, and safety features.

5.2 Žingsnis po žingsnio diegimas

Išjungti maitinimą: Locate the circuit breaker that controls the power to the switch box and turn it OFF. Verify power is off using a voltage testeris.
Seno jungiklio pašalinimas: Carefully remove the existing wall plate and switch from the electrical box. Disconnect the wires from the old switch.
Identifikuokite laidus: Identify the Line (Hot), Load, Neutral, and Ground wires in your electrical box. The neutral wire is typically white. If you are unsure, consult a qualified electrician.
Prijunkite laidus: Using the provided wire nuts, connect the wires from the TSOS5-W switch to the corresponding wires in the electrical box:
- Black switch wire to Line (Hot) wire.
- Red switch wire to Load wire.
- White switch wire to Neutral wire.
- Green switch wire to Ground wire.
Jungiklio tvirtinimas: Carefully fold the wires into the electrical box and secure the TSOS5-W switch to the box using the mounting screws.
Įdiekite sieninę plokštę: Attach the wall plate (sold separately) over the switch.
Atkurti maitinimą: Įjunkite maitinimą grandinės pertraukikliu.

6. Operacija

The TSOS5-W features a slider switch for mode selection and adjustable dials for sensitivity and time delay, located behind the faceplate.

6.1 Režimo pasirinkimas

Close-up of the TSOS5-W switch showing the OFF, AUTO, and ON positions of the slider switch.

Figure 3: The OFF-AUTO-ON slider switch for mode selection.

AUTO Mode (Occupancy Sensor): In this mode, the switch automatically turns lights ON when motion is detected and OFF after a set time delay when no motion is detected. This is the primary energy-saving mode.
ĮJUNGTAS režimas: This mode overrides the sensor, keeping the lights ON continuously, similar to a standard light switch.
OFF režimas: This mode overrides the sensor, keeping the lights OFF continuously, similar to a standard light switch.

6.2 Adjusting Settings (Behind Faceplate)

To access the adjustment dials, carefully remove the faceplate of the switch. You will find dials for Time Delay and Sensitivity.

Laiko delsa: This setting determines how long the lights remain ON after the last detected motion. Adjustable options include 15 seconds (test mode), 10 minutes, 20 minutes, and 30 minutes. Rotate the dial to select the desired delay.
Jautrumas: This setting controls the sensor's responsiveness to motion. It can be adjusted from 30% to 100%. A higher sensitivity setting will detect smaller movements or movements at a greater distance. Rotate the dial to adjust.

Image showing the TSOS5-W switch installed in a laundry room, with a woman carrying a laundry basket. The text 'Hands-Free Occupancy modes auto ON/OFF' is overlaid.

Figure 4: The TSOS5-W in an occupancy sensing application, providing hands-free lighting control.

7. Problemų sprendimas

Problema	Galima priežastis / sprendimas
Lights do not turn ON/OFF or device does not work after installation.	Verify power is ON at the circuit breaker. Ensure all wiring connections (Line, Load, Neutral, Ground) are correct and secure. A neutral wire is required. Check if the switch is in the correct mode (AUTO, ON, OFF). Confirm the load (light/fan) is functioning correctly. Jei problema išlieka, susisiekite su klientų aptarnavimo tarnyba.
Lights turn ON unexpectedly or stay ON too long.	Adjust the sensitivity dial to a lower setting. Check for heat sources or air currents (e.g., HVAC vents, windows) within the sensor's field of view that might be causing false triggers. Reduce the time delay setting.
Lights do not turn ON when motion is detected.	Ensure the switch is in AUTO mode. Padidinkite jautrumo nustatymą. Verify the sensor's field of view nėra trukdoma. Check if the ambient light level is too high (some sensors have a daylight detection feature that prevents lights from turning on if sufficient natural light is present).
Cannot set time delay less than 10 minutes.	The specified time delay options are 15 seconds (test mode), 10 minutes, 20 minutes, and 30 minutes. Intermediate settings between 15 seconds and 10 minutes are not available.

8. Priežiūra

Clean the sensor lens periodically with a soft, dry cloth to ensure optimal performance. Avoid using abrasive cleaners.
Do not paint over the sensor lens.
Viduje nėra dalių, kurias galėtų aptarnauti vartotojas. Nebandykite ardyti įrenginio.

9. Garantija ir palaikymas

TOPGREENER products are designed for reliability and performance. For warranty information or technical support, please contact TOPGREENER customer service. Refer to the product packaging or the official TOPGREENER websvetainė, kurioje rasite kontaktinius duomenis.

Gamintojas: Top Greener Inc