RHYTHM 8RZ166SR03 „Fit Wave“ išmaniojo žadintuvo naudotojo vadovas

1. Įvadas

Ačiū, kad pirkoteasing the RHYTHM 8RZ166SR03 Fit Wave Smart Alarm Clock. This device is a radio-controlled alarm clock equipped with a thermometer, hygrometer, and calendar display. Its compact design and user-friendly interface make it ideal for various indoor settings. This manual provides detailed instructions to help you set up, operate, and maintain your new alarm clock.

Pagrindinės funkcijos:

• Atomic Clock Movement: Automatically synchronizes time via radio waves for precise accuracy.
• Temperatūros rodymas: Shows ambient temperature from -9.9 to 50 ℃.
• Drėgmės ekranas: Shows ambient humidity from 20% to 95%.
• Electronic Sound Alarm: Features an alarm with an auto-stop function.
• Snaudimo funkcija: Laikinai nutildo žadintuvą.
• Dial Light: Includes an afterglow function for visibility in low light (5 seconds).
• Kalendoriaus ekranas: Shows date and day of the week, including Rokuyoku (Japanese traditional calendar).
• 12/24 valandų rodymas: Switchable time format.

2. Pakuotės turinys

Prašome patikrinti, ar pakuotėje yra visi reikalingi daiktai:

• RHYTHM 8RZ166SR03 Fit Wave Smart Alarm Clock
• Instrukcijų vadovas (šis dokumentas)

Note: 2 x AA manganese batteries are required and sold separately.

3. Produktas baigtasview

Priekyje View and Display Elements:

This image displays the front of the RHYTHM 8RZ166SR03 alarm clock. It features a large digital LCD screen at the top, showing time, date, temperature, and humidity. Below the screen are five circular control buttons labeled (from left to right): Monitor, Time Adjustment, Reset, Back, and Forward.

This diagram illustrates the various elements of the LCD display:

• Laiko rodymas: Shows the current time in 12-hour (AM/PM) or 24-hour format.
• Radio Wave Reception Indicator: Displays the status of radio wave reception.
• Aliarmo indikatorius: An icon appears when the alarm is activated.
• Temperatūros rodymas: Rodo esamą kambario temperatūrą.
• Drėgmės ekranas: Shows the current room humidity.
• Kalendoriaus ekranas: Shows the current date and day of the week, including Rokuyoku.

Atgal View ir valdikliai:

The back of the clock features the alarm ON/OFF slide switch on the left side and the battery compartment cover in the center. The model number '8RZ166' and 'MADE IN CHINA' are also visible.

Control Buttons Explained:

This image details the function of each button:

• Monitoriaus mygtukas: Used to check the alarm sound.
• Time Adjustment Button: Used for manual time setting and switching between 12/24 hour display.
• Atkūrimo mygtukas: Resets the clock and also functions as a forced radio wave reception button.
• Mygtukas „Atgal“ (←): Used to decrease values during alarm or time settings.
• Forward Button (→): Used to increase values during alarm or time settings.
• Alarm Switch (on back): Slides up for ON, down for OFF.
• Snooze Button (top): Activates the snooze function and the dial light.

4. Sąranka

4.1 Akumuliatoriaus įdėjimas

1. Nuimkite baterijų skyriaus dangtelį laikrodžio gale.
2. Insert two (2) AA manganese batteries, ensuring the correct polarity (+/-) as indicated inside the compartment.


This image shows the open battery compartment with two AA batteries correctly inserted, indicating the positive and negative terminals.

3. Uždėkite akumuliatoriaus skyriaus dangtelį.

4.2 Initial Power On and Radio Wave Reception

After battery installation, the clock will automatically attempt to receive radio waves to set the correct time. This process may take several minutes. Ensure the clock is placed in an area with good reception, away from electronic devices that may cause interference.

This diagram illustrates how radio-controlled clocks receive standard time signals from two transmission stations (one in Fukushima, 40kHz, and one in Fukuoka/Saga, 60kHz) to automatically correct and display the precise time. The clock will automatically adjust its time based on these signals.

If reception is successful, the time will be set automatically. If not, you may need to manually set the time (refer to Section 5.1).

5. Naudojimo instrukcijos

5.1 Rankinis laiko ir datos nustatymas

In cases where radio wave reception is difficult or for specific time zone adjustments:

1. Paspauskite ir palaikykite Laiko koregavimas mygtuką, kol pradės mirksėti laiko ekranas.
2. Naudokite Atgal (←) ir Forward (→) mygtukai valandoms reguliuoti.
3. Paspauskite Laiko koregavimas button again to move to minutes, then adjust using Atgal (←) ir Forward (→).
4. Spauskite toliau Laiko koregavimas , kad perjungtumėte metų, mėnesio ir dienos nustatymus, kiekvieną koreguodami su Atgal (←) ir Forward (→).
5. Kai visi nustatymai bus teisingi, paspauskite Laiko koregavimas button one last time to confirm and exit the setting mode.

5.2 Signalizacijos nustatymai

1. Norėdami nustatyti žadintuvo laiką, paspauskite ir palaikykite Laiko koregavimas button until the alarm time starts flashing (this may require cycling past the current time settings if already in manual time setting mode).
2. Naudokite Atgal (←) ir Forward (→) mygtukus, kad nustatytumėte norimą žadintuvo valandą ir minutę.
3. Paspauskite Laiko koregavimas mygtuką, kad patvirtintumėte žadintuvo laiką.

5.3 Signalizacijos įjungimas / išjungimas

Naudokite Alarm ON/OFF slide switch located on the back of the clock:

• Stumkite jungiklį UP to activate the alarm. An alarm icon will appear on the display.
• Stumkite jungiklį ŽEMYN to deactivate the alarm. The alarm icon will disappear.

5.4 Snooze Function and Dial Light

Kai suskamba žadintuvas, paspauskite didelį Snaudimo mygtukas located on the top of the clock. This will:

• Temporarily silence the alarm (snooze duration is preset).
• Activate the dial light for approximately 5 seconds, illuminating the display for easy viewtamsoje.

Žadintuvas vėl suskambės po snaudimo laikotarpio. Norėdami visiškai išjungti žadintuvą, pastumkite Signalizacijos ON/OFF jungiklis į OFF.

5.5 Display Modes (12/24 Hour Format)

To switch between 12-hour (with AM/PM indicator) and 24-hour time formats, briefly press the Laiko koregavimas mygtukas yra už nustatymo režimo ribų.

5.6 Checking Alarm Sound

Į priešview the alarm sound, press the Monitorius button on the front of the clock.

6. Priežiūra

6.1 Valymas

To clean the clock, wipe it gently with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the casing arba ekranas.

6.2 Akumuliatoriaus keitimas

When the display becomes dim or the clock functions erratically, it is time to replace the batteries. Follow the battery installation steps in Section 4.1. It is recommended to replace both batteries at the same time with new ones.

7. Problemų sprendimas

8. Specifikacijos

9. Garantija ir palaikymas

RHYTHM products are manufactured with high-quality standards. For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. If you encounter any issues or require technical assistance, please contact the RHYTHM customer support or your local distributor. Keep your purchase receipt as proof of purchase.