Legrand 138074 Manual Call Point Instruction Manual

1. Produktas baigtasview

The Legrand 138074 is a manual call point designed for fire alarm systems. It features a white housing, two contacts, and an integrated LED indicator. This device allows for manual activation of a fire alarm in emergency situations, providing a clear visual and tactile indication of activation.

1 pav.: priekis view of the Legrand 138074 Manual Call Point.

2. Saugos informacija

Please read and understand all safety instructions before installing or operating this device. Failure to follow these instructions may result in property damage, injury, or death.

• Profesionalus montavimas: Installation must be performed by qualified personnel in accordance with all local and national electrical codes and fire safety regulations.
• Maitinimo atjungimas: Always disconnect power to the circuit before performing any installation, maintenance, or troubleshooting.
• ttage Patikrinkite: Patikrinkite, ar maitinimo šaltinio ttage matches the device's specifications.
• Aplinkos sąlygos: Do not install in areas with excessive moisture, extreme temperatures, or corrosive environments.
• Komponentų vientisumas: Nenaudokite prietaiso, jei kuri nors dalis yra pažeista.

3. Pakuotės turinys

Atidarę pakuotę, patikrinkite, ar yra visi komponentai ir ar jie nepažeisti:

• Legrand 138074 Manual Call Point (1 unit)
• Tvirtinimo varžtai (kiekis kaip pateiktas)
• Instrukcijų vadovas (šis dokumentas)

4. Sąranka ir diegimas

The Legrand 138074 Manual Call Point is designed for surface or flush mounting. Ensure the chosen location complies with local fire safety regulations regarding accessibility and visibility.

4.1. Montavimas

1. Paruoškite montavimo paviršių: Ensure the surface is clean, dry, and flat.
2. Gręžimo taškų žymėjimas: Use the call point's base as a template to mark the positions for mounting screws.
3. Gręžimo skylės: Drill pilot holes appropriate for the mounting screws.
4. Apsaugokite bazę: Attach the call point's base securely to the wall using the provided screws.

4.2. Laidai

Refer to the wiring diagram below and your fire alarm control panel's documentation for correct connection. This device features 2 contacts and an LED indicator.

• Connect the alarm circuit wires to the designated terminals (typically NO/NC contacts).
• Connect the LED indicator wires to the appropriate power source and signaling circuit as per your system's requirements.
• Įsitikinkite, kad visos jungtys yra saugios ir tinkamai izoliuotos.

2 pav. Vidinis view and wiring terminals of the Legrand 138074 Manual Call Point.

4.3. Galutinis surinkimas

1. Carefully place the front cover onto the mounted base, ensuring all wires are tucked away and not pinched.
2. Secure the cover with any retaining screws or clips provided.
3. Restore power to the circuit and test the device according to your fire alarm system's testing procedures.

5. Naudojimo instrukcijos

In the event of a fire or other emergency requiring immediate alarm activation:

1. Locate the Call Point: Identify the nearest Legrand 138074 Manual Call Point.
2. Įjunkite žadintuvą: Firmly press the designated activation area on the call point. This action will typically break a frangible element or activate a switch.
3. Patikrinkite aktyvavimą: The integrated LED indicator should illuminate, confirming that the call point has been activated and the signal sent to the fire alarm control panel.
4. Evakuojuosi: Follow your building's emergency evacuation procedures.

Note: Resetting the call point typically requires a special key or tool to return the activation mechanism to its original state after an alarm. Consult your fire alarm system administrator for reset procedures.

6. Priežiūra

Regular maintenance ensures the reliable operation of your manual call point.

• Vizuali apžiūra: Periodically inspect the call point for any signs of physical damage, tampering, or obstruction. Ensure the LED is functional during system tests.
• Valymas: Clean the exterior of the call point with a soft, damp audinys. Nenaudokite abrazyvinių valiklių ar tirpiklių.
• Funkcinis testas: Conduct regular functional tests as required by local fire safety regulations and your fire alarm system's maintenance schedule. This should be performed by qualified personnel.
• Komponento keitimas: If the frangible element is broken or the device is damaged, it must be replaced by a qualified technician.

7. Problemų sprendimas

If you encounter issues with your Legrand 138074 Manual Call Point, refer to the table below. For problems not listed, contact qualified service personnel.

8. Specifikacijos

9. Informacija apie garantiją

Legrand products are manufactured to high standards and are typically covered by a limited warranty against defects in materials and workmanship. The specific warranty period and terms may vary by region and product type. Please retain your proof of purchase. For detailed warranty information, refer to the official Legrand website or contact Legrand customer support in your region.

10. Pagalba ir kontaktai

For technical assistance, product inquiries, or to report issues, please contact Legrand customer support. You can find contact information, including phone numbers and online support portals, on the official Legrand websvetainė:

www.legrand.com

Kreipdamiesi į palaikymo tarnybą, turėkite paruoštą savo produkto modelio numerį (138074) ir visą susijusią pirkimo informaciją.