NUX MG-100 elektrinės gitaros multiefektų pedalų procesoriaus naudotojo vadovas

1. Įvadas

The NUX MG-100 is a versatile multi-effects pedal processor designed for electric guitarists. It integrates a wide array of effects, amplifier models, and utility features into a compact and portable unit. This manual provides detailed instructions for setting up, operating, and maintaining your MG-100 to ensure optimal performance.

Figure 1: NUX MG-100 Multi-Effects Pedal Processor

2. Produkto ypatybės

• A total of 58 effects, with up to 8 usable simultaneously.
• 13 klasika amp models utilizing NUX's TS/AC technology.
• Vintage 3-band passive EQ modeling for each amp modelis.
• 6-band graphic EQ specifically designed for electric guitar (120Hz, 250Hz, 750Hz, 1.6kHz, 3.2kHz, 6.4kHz).
• 11 cabinet models for diverse sound shaping.
• Seamless and quick preset switching.
• Up to 40 seconds phrase loop with sound-on-sound capability.
• Integruotas būgnų įrenginys su CD kokybės PCM garsais.
• Large color TFT LCD panel (160x128) with a graphic interface for intuitive operation.
• A total of 72 presets (36 factory + 36 user presets).
• Powered by six AA/LR6 alkaline batteries for up to 8 hours of continuous use, or via AC adapter.
• Built-in tuner for accurate instrument tuning.

3. Front Panel Controls and Functions

2 pav. Priekinio skydelio išdėstymas

1. PRESET ▲▼ Foot Switches: Used to select presets. The right switch selects the next preset up, and the left switch selects the next preset down. Press both switches simultaneously to enter tuning mode.
2. Expression pedalas: Provides real-time control over volume, wah, or assigned effect parameters. It includes a switch to activate/deactivate the wah feature by applying extra pressure to the toe. Sensitivity can be calibrated.
3. MODULIO mygtukai: Navigate through the effects modules. Pressing these buttons cycles through the available effect sets displayed on the screen.
4. IŠSAUGOTI mygtukas: Saves your customized tone settings. Press once to initiate saving, use the SELECT knob to choose characters for the preset name, and MODULE knobs to change characters. Select the group and preset location with PRESET ▲▼, then press SAVE again to confirm.
5. TAP mygtukas: Sets the overall tempo for delay time synchronization and LFO frequency for modulation effects. Tap tempo is calculated from the average of the first two to ten taps. The tempo is displayed in beats per minute (BPM).
6. Ekranas: A 160x128 TFT LCD screen showing information for various functions. In LIVE mode, it displays the current preset number and name. In EDIT mode, it shows the model name.
7. Redagavimo mygtukas: In SAVE mode, this button stops the save procedure. In LIVE and EDIT mode, it switches between these two modes.
8. JAM Button: Activates or deactivates the built-in drum and loop machine interface.
9. MAIŠYTUVO mygtukas: Enters MIXER mode, recommended when connecting the MG-100 directly to a recorder, hi-fi system, headphones, or other audio devices.
10. SELECT rankenėlė: Used to choose effects for each module in LIVE mode, characters in SAVE mode, and tempo in DRUM mode.
11. KNOBS 1-3: Adjust parameters of the selected effect module. Knob 3 specifically controls the master volume in LIVE mode.
12. PEDAL Button: Selects the module to assign to the expression pedal. In SAVE mode, it's used to choose characters. In DRUM mode, it's used to enter the tempo.

4. Galinio skydelio jungtys

3 pav. Galinio skydelio išdėstymas

1. INPUT (13): Prijunkite savo instrumentą prie šio didelės varžos įėjimo.
2. IŠVADA (14): Connect to the input of a guitar amplifier or mixer for mono operation. A Y-cable can be used to send the output to two ampgelbėtojai.
3. AUX IN (15): Connect the headphone output of an MP3 player or CD player. Adjust the playback device's output level and the MG-100's master Level Knob for proper volume balance.
4. DC IN (16): Connect the included DC9V negative tip power supply.

5. Įrenginio maitinimas

5.1. Jungtys

4 pav. Ryšio schema

• Use only the included AC adapter or a DC9V (center minus plug) 300mA power adapter. Using an incorrect adapter may cause damage.
• The INPUT jack also functions as a power switch. Inserting a plug turns on the power; disconnecting it turns off the power. Always unplug the cable when the MG-100 is not in use.
• Prijunkite gitarą amp to the OUTPUT jack. For stereo output, use a Y-cable to connect to two guitar amps. Stereo headphones can also be connected to the OUTPUT jack. Ensure MIXER function is enabled for proper frequency response with headphones.

5.2. Baterijų įdėjimas

• Turn the unit over and open the battery compartment cover on the bottom.
• Insert six AA batteries, ensuring correct polarity (+ and - ends).
• Venkite maišyti naujų ir naudotų baterijų.
• A "Low Battery" indicator will appear on the display when batteries are low. The remaining charge can be checked in edit modes.

5.3. Maitinimo įjungimas

• Before powering on, turn down the volume on all connected devices.
• Insert the guitar cable into the INPUT jack.
• Turn on any connected CD/MP3 player or other Aux input devices.
• Įjunk gitarą amp or other output devices.
• Gradually adjust the volume of each device to your desired level.

6. Pagrindinė operacija

6.1. Exploring Presets and Effects

The NUX MG-100 comes with 72 presets (36 factory and 36 user-definable) and 58 different effects. Use the PRESET ▲▼ foot switches to navigate through them. The MODULIS buttons allow you to step through different effect types within a preset.

The following video demonstrates various presets and features of the MG-100, including the wah pedal, battery compartment, drum machine, and different amp/effect sounds.

6.2. Editing and Saving Tones

To customize a tone, press the REDAGUOTI button. You can then use the PASIRINKTI rankenėlė ir KNOBS 1-3 to adjust parameters for various effects like EQ, Noise Gate, Chorus, and Delay. After making adjustments, press the IŠSAUGOTI button to store your custom tone in one of the user preset slots. You can name your custom presets using the PASIRINKTI rankenėlė ir MODULIS mygtukai.

6.3. Drum Machine and Looper

The MG-100 features a built-in drum machine and a 40-second phrase looper. Press the JAM button to access these features. You can select various drum styles (Rock, Country, Blues, Metal, etc.) and use the looper for practice or song creation.

The following video provides a demonstration of the built-in tuner, drum machine, and looper functions.

6.4. Derintuvas

To activate the built-in tuner, press both PRESET ▲▼ foot switches simultaneously. The display will show the tuning interface, allowing you to accurately tune your guitar.

7. Specifikacijos

8. Problemų sprendimas

• Nėra garso: Patikrinkite visas laidų jungtis (gitaros, amp, power). Ensure the volume knobs on the MG-100 and your amplifier are turned up. Verify that the correct input and output settings are selected.
• Iškraipytas / nepageidaujamas garsas: Check gain and level settings on the MG-100. Ensure no unwanted effects are active. If using batteries, check battery level.
• Pedalas nereaguoja: Ensure the expression pedal is calibrated correctly. Check if the pedal is assigned to the desired module.
• Susiję dokumentai - MG-100

  	NUX MG-300 modeliuojančio gitaros procesoriaus savininko vadovas Atraskite NUX MG-300 modeliavimo gitaros procesorių – universalų daugiafunkcinį pedalą su TSAC-HD Amp Modeliavimas, CORE-IMAGE efektų pridėjimas po įrašymo, 56 būgnų ritmai, 60 sekundžių trukmės looperis ir USB garso transliacija. Šiame naudotojo vadove pateikiamos išsamios naudojimo, efektų ir nustatymų instrukcijos.
  	NUX MG-300 MKII modeliavimo gitaros procesoriaus naudotojo vadovas Išsamus NUX MG-300 MKII modeliuojančio gitaros procesoriaus naudotojo vadovas, kuriame išsamiai aprašomos jo funkcijos, veikimas, jungiamumas, sistemos nustatymai ir techninės specifikacijos. Sužinokite, kaip naudoti. amp modeliavimo, efektų, kilpų kūrimo ir įrašymo galimybės.
  	NUX MG-30 universalus modeliuotojo vartotojo vadovas Comprehensive user manual for the NUX MG-30 Versatile Modeler, detailing its features, operation, controls, and specifications. Learn how to use amp modeling, effects, looper, drum machine, tuner, and global settings.
  	NUX MG-400 modeliuojančios gitaros ir bosinės gitaros procesoriaus naudotojo vadovas Šiame vadove pateikiama išsami informacija apie NUX MG-400 modeliavimo gitaros ir bosinės gitaros procesorių, apimantį jo savybes, funkcijas ir veikimą. Sužinokite apie jo TSAC-HD. amp modeliavimas, platūs efektai, patogi vartotojo sąsaja ir ryšio galimybės.
  	„NUX MG-20“ gitaros modeliavimo procesoriaus vartotojo vadovas Išsamus NUX MG-20 gitaros modeliavimo procesoriaus naudotojo vadovas, kuriame išsamiai aprašomos jo savybės, veikimas, prijungimas ir specifikacijos.
  	NUX MG-30 universalus modeliuotojo vartotojo vadovas This manual provides detailed information on the NUX MG-30 Versatile Modeler, including safety instructions, features, control panel layout, connection diagrams, global settings, specifications, and included accessories.