DB Electrical TRM0079 Tilt Trim Motor Instruction Manual

1. Įvadas

This instruction manual provides essential information for the proper installation, operation, and maintenance of your DB Electrical TRM0079 Tilt Trim Motor. Please read this manual thoroughly before attempting any installation or operation to ensure safe and efficient use of the product. This unit is designed as a replacement tilt and trim motor for various marine applications, specifically compatible with Volvo Penta models.

2. Saugos informacija

• Always disconnect the battery before performing any installation or maintenance on the tilt trim motor to prevent electrical shock or accidental operation.
• Wear appropriate personal protective equipment, including safety glasses and gloves, during installation and maintenance.
• Ensure the boat is securely supported and the outdrive is in a safe position before working on the tilt trim system.
• Handle hydraulic fluid with care. Refer to the fluid manufacturer's safety data sheet.
• If you are unsure about any part of the installation or repair process, consult a qualified marine technician.
• Šiame produkte yra cheminių medžiagų, kurios, kaip žinoma Kalifornijos valstijoje, sukelia vėžį, apsigimimus ar kitokią reprodukcinę žalą (65 pasiūlymo įspėjimas).

3. Produktas baigtasview ir specifikacijos

The DB Electrical TRM0079 is a 12-volt replacement tilt and trim motor designed for marine applications. It includes the pump and reservoir as a complete unit.

Figure 3.1: DB Electrical TRM0079 Tilt Trim Motor. This image shows the complete unit, including the electric motor, hydraulic pump, and fluid reservoir, with electrical connections visible.

Techninės specifikacijos:

• Vieneto tipas: Tilt & Trim Motor (Includes Pump & Reservoir)
• ttage: 12 voltų
• Pasukimas: RE (Reverse)
• Bendri matmenys: Approximately 9" W x 7.5" H (22.86 cm W x 19.05 cm H)
• Motor Body Diameter (OD): 3 colio (76.2 mm)
• Shaft Diameter (OD): 0.315 colio (8 mm)
• Ilgis: 5.906 colio (150 mm)
• Medžiaga: Metalas
• Prekės svoris: 6.5 svarų (2.95 kg)

Compatible OEM Part Numbers:

• API MARINE: PT408N
• ARROWHEAD: TRM0079
• EMP Units: 4-6806
• J ir N: 430-22086
• LESTER: 10856
• QUICKSILVER: 8M6007551
• SIERRA MARINE: 18-6806
• VOLVO: 3587079, 3857079, 3857489, 3858069, 3860879
• WAI: 10856N

This unit is compatible with all Volvo Penta models requiring these specifications.

4. Montavimas

Proper installation is crucial for the performance and longevity of your tilt trim motor. It is recommended that installation be performed by a qualified marine technician.

Veiksmai prieš montavimą:

1. Patikrinkite suderinamumą: Before beginning, confirm that the TRM0079 unit is the correct replacement for your specific marine engine and outdrive model. Compare the specifications and OEM part numbers provided in Section 3 with your existing unit.
2. Surinkite įrankius: Ensure you have all necessary tools, including wrenches, screwdrivers, hydraulic fluid, and a container for draining old fluid.
3. Atjunkite maitinimą: Disconnect the boat's battery to prevent accidental electrical activation during installation.
4. Secure Outdrive: Position and secure the outdrive to prevent movement during the removal and installation process.

Seno įrenginio išėmimas:

1. Carefully disconnect the electrical wiring from the old tilt trim motor. Note the wiring configuration for reinstallation.
2. Place a drain pan beneath the unit. Disconnect the hydraulic lines from the old pump. Allow all hydraulic fluid to drain completely.
3. Remove the mounting bolts securing the old tilt trim motor assembly to the transom or mounting bracket.
4. Carefully remove the old unit from the boat.

Naujo įrenginio įrengimas:

1. Montavimas: Position the new DB Electrical TRM0079 unit in the mounting location. Secure it using the appropriate mounting bolts. Ensure all connections are tight and secure.
2. Hydraulic Line Connections: The TRM0079 unit comes with various adapter fittings (silver and brass) and O-rings. It is critical to use the correct adapters and O-rings for a leak-free connection.
   • The silver fittings are generally required.
   • Select the brass fittings that match your original motor's hydraulic lines.
   • Ensure the larger O-ring is placed on the male portion of the silver adapter.
   • Ensure the smaller O-ring is placed on the male hose end that feeds into the brass adapter.
   • Tighten all hydraulic connections firmly but do not overtighten.
3. Elektros jungtys: Connect the electrical wiring to the new motor, matching the configuration noted during removal. Ensure all connections are clean, secure, and free from corrosion.
4. Fill with Hydraulic Fluid: Fill the reservoir with the recommended hydraulic fluid. For Volvo Penta systems, 10-weight hydraulic oil is typically specified. Dexron ATF (Automatic Transmission Fluid) is often a suitable alternative as it is also a 10-weight hydraulic oil. Do not overfill.
5. Sistemos nuorinimas: After filling, cycle the tilt and trim system up and down several times to bleed any air from the hydraulic lines. Monitor the fluid level and top off as needed.
6. Iš naujo prijunkite maitinimą: Reconnect the boat's battery.

5. Operacija

The DB Electrical TRM0079 Tilt Trim Motor operates by controlling the angle of your boat's outdrive. This allows for optimal performance, fuel efficiency, and shallow water operation.

• Use the designated tilt/trim switch on your boat's control panel to raise or lower the outdrive.
• Apipjaustymas: Adjusting the outdrive angle while underway to optimize boat performance and ride quality.
• Pakreipimas: Raising the outdrive completely out of the water for trailering, shallow water navigation, or maintenance.
• Avoid operating the trim system continuously for extended periods to prevent overheating.

6. Priežiūra

Regular maintenance ensures the longevity and reliable operation of your tilt trim motor.

• Skysčio lygio patikrinimas: Periodically check the hydraulic fluid level in the reservoir. Top off with the recommended 10-weight hydraulic oil (e.g., Dexron ATF) if necessary.
• Patikrinkite, ar nėra nuotėkio: Regularly inspect all hydraulic lines and connections for any signs of leaks. Address any leaks immediately to prevent system failure.
• Elektros jungtys: Check electrical connections for corrosion, looseness, or damage. Clean and tighten as needed.
• Bendras valymas: Keep the exterior of the motor and reservoir clean from dirt, salt, and debris.

7. Problemų sprendimas

This section addresses common issues you might encounter with your tilt trim motor.

8. Garantija ir palaikymas

DB Electrical provides a 1-year warranty on this product. This warranty covers manufacturing defects and ensures the product will function flawlessly when installed correctly. In the rare event of a product malfunction within one year of purchase, DB Electrical will replace the unit. For warranty claims or technical support, please contact DB Electrical customer service.

For further assistance, please refer to the official DB Electrical websvetainėje arba susisiekite tiesiogiai su jų klientų aptarnavimo tarnyba.