DYNAUDIO Emit M10 Bookshelf Speaker Instruction Manual

Įvadas

Thank you for choosing the DYNAUDIO Emit M10 Bookshelf Speakers. The M10 is the most compact model in the Emit range, designed to provide high-end audio performance. These speakers feature a 28 mm soft dome tweeter and a 14 cm MSP (Magnesium Silicate Polymer) mid/bass driver, coupled with a 1st order crossover. The Emit M10 is engineered for easy integration with various amplifiers, offering a 6 ohm impedance and an expertly tuned bass-reflex cabinet for impressive low-frequency response.

This manual provides essential information for the proper setup, operation, and maintenance of your new speakers to ensure optimal performance and longevity.

Svarbi saugos informacija

• Read these instructions thoroughly before operating the product.
• Išsaugokite šias instrukcijas, kad galėtumėte pasinaudoti ateityje.
• Atkreipkite dėmesį į visus įspėjimus ant gaminio ir naudojimo instrukcijose.
• Vykdykite visas instrukcijas.
• Nenaudokite šio prietaiso šalia vandens.
• Valykite tik sausa šluoste.
• Neužblokuokite jokių ventiliacijos angų. Montuokite pagal gamintojo instrukcijas.
• Nemontuokite šalia jokių šilumos šaltinių, pvz., radiatorių, šilumokaičių, viryklių ar kitų įrenginių (įskaitant ampkeltuvai), kurie gamina šilumą.
• Naudokite tik gamintojo nurodytus priedus/priedus.
• Visus techninės priežiūros darbus patikėkite kvalifikuotam techninės priežiūros personalui. Techninė priežiūra reikalinga, kai aparatas buvo kaip nors pažeistas, pvz., pažeistas maitinimo laidas arba kištukas, į aparatą išsiliejo skystis ar įkrito daiktai, aparatas buvo paveiktas lietaus ar drėgmės, neveikia normaliai. , arba buvo numestas.

Pakuotės turinys

Carefully unpack your DYNAUDIO Emit M10 speakers and verify that all items are present:

• DYNAUDIO Emit M10 Bookshelf Speakers (Pair)
• Grills (Pair)
• Instrukcijų vadovas (šis dokumentas)

Jei trūksta kokių nors prekių arba jos pažeistos, nedelsdami susisiekite su pardavėju.

Sąranka

Garsiakalbio vieta

Proper speaker placement is crucial for optimal sound quality. Consider the following guidelines:

• Atstumas nuo sienų: Bookshelf speakers generally benefit from being placed a short distance from the rear wall to allow the bass-reflex port to function correctly and prevent excessive bass. Experiment with distances from 6 inches to 2 feet (15-60 cm).
• Aukštis: Position the speakers so that the tweeters are approximately at ear level when you are seated in your primary listening position. This often means placing them on dedicated speaker stands or sturdy shelves.
• Stereo trikampis: For a stereo setup, place the speakers and your listening position to form an equilateral triangle. The distance between the speakers should be roughly equal to the distance from each speaker to your listening position.
• Įdėjimas: Experiment with angling the speakers slightly inward towards your listening position (toe-in). This can improve imaging and soundstage. dėmesys.

Vaizdas: priekis view of the white DYNAUDIO Emit M10 Bookshelf Speaker with the protective grill attached.

Vaizdas: priekis view of the white DYNAUDIO Emit M10 Bookshelf Speaker, showing the tweeter and mid/bass driver without the grill.

Prisijungimas prie an Ampgyvybingesnis

The DYNAUDIO Emit M10 speakers are passive speakers and require an external amplifier for operation. Follow these steps to connect your speakers:

1. Išjungti: Užtikrinkite savo ampPrieš atlikdami bet kokius prijungimus, įsitikinkite, kad lifier yra išjungtas ir atjungtas nuo elektros lizdo.
2. Garsiakalbių laidai: Use high-quality speaker cables. Strip approximately 1/2 inch (1.25 cm) of insulation from the ends of the speaker wires. Twist the bare strands tightly.
3. Poliškumas: It is critical to connect the speakers with correct polarity. Connect the positive (+) terminal (red) on the speaker to the positive (+) terminal (red) on your amplifier. Similarly, connect the negative (-) terminal (black) on the speaker to the negative (-) terminal (black) on your amplifier. Incorrect polarity will result in poor sound quality, particularly in bass response.
4. Saugūs ryšiai: Unscrew the binding posts on the back of the speaker and amplifier, insert the bare wire or banana plug, and tighten securely. Ensure no stray wire strands are touching other terminals, which could cause a short circuit.

Vaizdas: Galinis view of the white DYNAUDIO Emit M10 Bookshelf Speaker, highlighting the bass-reflex port and the speaker wire binding posts.

Garsiakalbių valdymas

Once your speakers are properly connected to an amplifier, you can begin enjoying your audio system.

• Maitinimas: Prijunkite ir įjunkite savo ampgyvesnis.
• Garsumo valdymas: Pradėkite nuo amplifier's volume control at its lowest setting and gradually increase it to a comfortable listening level.
• Įsilaužimo laikotarpis: Like many high-fidelity audio components, your speakers may benefit from a "break-in" period. This typically involves 50-100 hours of normal use, during which the drivers will loosen up and the sound quality may improve further.
• Kepsninės: The included grills protect the speaker drivers. You may choose to use them or remove them for a slightly different aesthetic and potentially a subtle change in sound, though the acoustic impact is generally minimal.

Priežiūra

To ensure the longevity and optimal performance of your DYNAUDIO Emit M10 speakers, follow these maintenance guidelines:

• Valymas: Dust the speaker cabinets regularly with a soft, dry, lint-free cloth. For stubborn marks, lightly dampen the cloth with water, but avoid using harsh chemicals, abrasive cleaners, or solvents, as these can damage the finish.
• Kepsninės: The speaker grills can be gently cleaned with a soft brush or a vacuum cleaner with a brush attachment.
• Venkite tiesioginių saulės spindulių ir karščio: Do not expose the speakers to direct sunlight for extended periods or place them near heat sources, as this can cause discoloration or damage to the cabinet and drivers.
• Drėgmė: Keep the speakers away from excessive moisture or humidity.
• Vairuotojo apsauga: Venkite tiesiogiai liesti garsiakalbių (aukštųjų ir žemųjų dažnių garsiakalbių), nes tai gali juos pažeisti.

Trikčių šalinimas

Jei kyla problemų dėl garsiakalbių, žr. šias dažniausiai pasitaikančias problemas ir sprendimus:

• Nėra garso:
  • Užtikrinti, amp„Lifier“ įjungtas ir tinkamai prijungtas.
  • Patikrinkite visų garsiakalbių laidų jungtis abiejose pusėse amplaidininko ir garsiakalbių, ar kontaktas saugus ir poliškumas teisingas.
  • Patikrinkite, ar jūsų įrenginyje pasirinktas teisingas įvesties šaltinis. ampgyvesnis.
  • Confirm the volume is turned up on the ampgyvesnis.
• Iškraipytas garsas:
  • Sumažinkite garsumo lygį savo ampPer didelis garsiakalbių dažnis gali sukelti iškraipymus.
  • Check speaker cable connections for any loose strands or short circuits.
  • Užtikrinti, amplifier's power output is suitable for the speakers (refer to specifications).
  • Patikrinkite garso šaltinį, ar nėra iškraipymų.
• Silpnas bosas:
  • Verify correct speaker polarity (+ to + and - to -) for both speakers. Incorrect polarity will cause bass cancellation.
  • Experiment with speaker placement, moving them closer to a wall can sometimes increase bass response.
• Netolygūs garsaitage / Imaging Issues:
  • Ensure speakers are placed symmetrically and at equal distances from the listening position.
  • Adjust speaker toe-in.

If the problem persists, consult your retailer or qualified service personnel.

Specifikacijos

Image: Diagram illustrating the dimensions of the black DYNAUDIO Emit M10 Bookshelf Speaker.

Garantija ir palaikymas

Informacija apie garantiją

Your DYNAUDIO Emit M10 Bookshelf Speakers are covered by a FIVE YEAR MANUFACTURER DEFECT WARRANTYŠi garantija taikoma medžiagų ir gamybos defektams, atsiradusiems įprasto naudojimo sąlygomis. Išsaugokite pirkimo įrodymą, jei galėtumėte pateikti pretenzijas dėl garantijos.

For specific terms and conditions of the warranty, please refer to the documentation provided with your purchase or visit the official DYNAUDIO websvetainę.

Pagalba klientams

If you require technical assistance, have questions about your product, or need to initiate a warranty claim, please contact your authorized DYNAUDIO retailer or visit the official DYNAUDIO support webSvetainė, kurioje rasite tolesnę pagalbą.

Please have your product model number (EMIT 10) and proof of purchase ready when contacting support.