„CATEYE Velo“ belaidžio dviračio kompiuterio naudojimo instrukcija

Įvadas

The CATEYE Velo Wireless bike computer provides essential ride data in a compact and user-friendly design. This manual will guide you through the setup, operation, and maintenance of your device, ensuring accurate tracking of your cycling activities.

Key features include current, maximum, and average speed, total distance, trip distance, elapsed time, calorie consumption, pace arrow, and clock. It also features a programmable odometer and automatic start/stop functionality.

Sudedamosios dalys

Patikrinkite, ar pakuotėje yra visi šie komponentai:

• CATEYE Velo Wireless Computer Unit
• Analog Wireless Speed Sensor
• Universal Wheel Magnet
• Zip-Tie Bracket for Handlebar/Stem Mounting
• Sensor Rubber Mount
• 4 x Zip-Ties
• 2 x CR2032 Batteries (one for computer, one for sensor)

Figure 1: All components included with the CATEYE Velo Wireless Bike Computer.

Sąranka ir diegimas

1. Baterijų įdėjimas

The computer unit and speed sensor each require one CR2032 battery. Ensure correct polarity when inserting.

Figure 2: Battery installation for the computer unit and speed sensor.

For the computer unit, gently pry open the battery cover on the back. For the sensor, twist the cover to unlock and remove. Insert the CR2032 batteries with the positive (+) side facing up. Replace covers securely.

2. Kompiuterio bloko montavimas

Attach the zip-tie bracket to your handlebar or stem. Position the bracket so the computer unit will be easily visible. Secure it firmly using the provided zip-ties. The computer unit slides onto the bracket and locks into place with a click.

Figure 3: Computer unit mounted on a bicycle stem using the zip-tie bracket.

Ensure the computer is securely attached and does not obstruct steering or other controls.

3. Mounting the Speed Sensor and Magnet

The speed sensor should be mounted on the front fork, and the wheel magnet on a spoke. The sensor and magnet must be aligned and within 5mm of each other for proper operation. Use the sensor rubber mount and zip-ties to secure the sensor to the fork. Attach the magnet to a spoke, ensuring it passes directly in front of the sensor's marked detection area.

Figure 4: Proper alignment of the speed sensor and wheel magnet.

Verify that the magnet does not strike the sensor during wheel rotation.

4. Initial Settings (Wheel Size, Units, Odometer)

After installation, you will need to configure the computer. Press the MODE button to cycle through settings. Set your wheel circumference for accurate speed and distance readings. The manual provides a chart for common wheel sizes. You can also select units (km/h or mph) and program the odometer to match previous mileage if desired.

5 pav. Pvzample of tire size settings for the computer.

Naudojimo instrukcijos

1. Power On/Off and Auto Start/Stop

The Velo Wireless features an automatic start/stop function. The computer will automatically begin recording when it detects wheel movement and pause when stationary. To manually power off, press and hold the MODE button until the display turns off. It will automatically power on when movement is detected again.

2. Ekrano režimai

Press the MODE button to cycle through the various display functions. The available data includes:

• BPD: Dabartinis greitis
• DST: Kelionės atstumas
• APIE: Vidutinis greitis
• MX: Maksimalus greitis
• TM: Praėjęs laikas
• ODO: Total Distance (Odometer)
• KPL: Kalorijų suvartojimas
• Laikrodis: Dabartinis laikas
• Pace Arrow: Indicates if current speed is above or below average speed.

6 pav. Baigtaview of the 8 unique data modes.

3. Programmable Odometer

The odometer can be manually set, which is useful when replacing batteries or transferring the unit to another bike. Refer to the detailed instructions in the full user manual for specific steps on programming the odometer.

Priežiūra

1. Baterijos keitimas

Both the computer unit and the speed sensor use CR2032 batteries. Battery life is approximately 1 year for the computer and 10,000 km (6,250 miles) for the sensor. Replace batteries when the display becomes dim or erratic. Always replace both batteries at the same time for optimal performance.

Figure 7: Battery compartment for CR2032 batteries.

2. Valymas

Nuvalykite kompiuterį ir jutiklį minkšta šluosteamp cloth. Do not use abrasive cleaners or solvents, as these can damage the unit. The unit is waterproof (IP65 rated), but avoid submerging it for extended periods or using high-pressure water jets.

Figure 8: The Velo Wireless is designed to be waterproof.

Trikčių šalinimas

• Be greičio rodymo: Check the alignment and distance between the speed sensor and wheel magnet. Ensure both have fresh batteries and are correctly installed. The gap should be less than 5mm.
• Netinkami rodmenys: This can be caused by interference from other electronic devices (e.g., powerful lights, mobile phones). Try repositioning the computer or sensor slightly. Ensure the magnet is securely attached and not slipping.
• Ekranas pritemdytas arba tuščias: Pakeiskite CR2032 bateriją kompiuterio bloke.
• Cannot Change Settings: Ensure the unit is not in recording mode. Press the MODE button to enter setting mode.

Specifikacijos

Produktų vaizdo įrašai

Garantija ir palaikymas

The CATEYE Velo Wireless Bike Computer comes with a 2-year warranty. For warranty claims, technical support, or further assistance, please refer to the official CATEYE websvetainėje arba susisiekite tiesiogiai su jų klientų aptarnavimo tarnyba. Išsaugokite pirkimo įrodymą, kad galėtumėte patvirtinti garantiją.

Official CATEYE Websvetainė: Visit the CAT EYE Store on Amazon