Fluance RT80 Classic High Fidelity Vinyl Turntable

Įvadas

Welcome to the user manual for your new Fluance RT80 Classic High Fidelity Vinyl Turntable. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your turntable to ensure optimal performance and longevity. Please read this manual thoroughly before using your turntable.

Kas įtraukta

Your Fluance RT80 turntable package includes the following components:

• RT80 Turntable Plinth
• Apsauga nuo dulkių
• 2x Apsauginio nuo dulkių vyriai
• Headshell with Audio Technica AT91 Cartridge
• Atsvara
• Aliuminio lėkštė
• Guminis diržas
• 45 adapteris
• Felt Slip Mat
• 3ft RCA Cable With Ground Wire
• 5ft 100V - 240V (50/60Hz) AC Power Adapter
• Greitos pradžios vadovas

Image: All components included in the Fluance RT80 turntable package, laid out for easy identification.

Svarbi saugos informacija

Please read and follow all safety instructions carefully to prevent damage to the unit and ensure your safety.

• Saugokite įrenginį nuo lietaus ar drėgmės.
• Ant įrenginio nedėkite daiktų, pripildytų skysčių, pvz., vazų.
• Neužblokuokite jokių ventiliacijos angų.
• Nemontuokite šalia jokių šilumos šaltinių, pvz., radiatorių, šilumokaičių, viryklių ar kitų įrenginių (įskaitant ampkeltuvai), kurie gamina šilumą.
• Saugokite maitinimo laidą, kad ant jo neužeitų ar nesuspaustų.
• Naudokite tik gamintojo nurodytus priedus/priedus.
• Atjunkite šį įrenginį žaibuojant arba kai nenaudojate ilgą laiką.
• Visus techninės priežiūros darbus patikėkite kvalifikuotam techninės priežiūros personalui.

Sąrankos vadovas

Follow these steps to properly set up your Fluance RT80 turntable.

1. Išpakavimas ir įdėjimas

Atsargiai išimkite visus komponentus iš pakuotės. Patefoną pastatykite ant stabilaus, lygaus paviršiaus, atokiau nuo tiesioginių saulės spindulių, šilumos šaltinių ir per didelės vibracijos.

Image: The Fluance RT80 turntable in its assembled state, ready for use.

2. Plokštelės ir diržo montavimas

1. Uždėkite aliuminio plokštę ant centrinio veleno.
2. Locate the rubber drive belt. Carefully stretch the belt around the inner rim of the platter and hook it onto the motor pulley. Ensure the belt is not twisted.
3. Place the felt slip mat on top of the platter.

3. Counterweight and Tonearm Balance

The Audio Technica AT91 cartridge is pre-installed on the headshell. You will need to balance the tonearm.

1. Gently slide the counterweight onto the rear of the tonearm with the numbers facing forward.
2. Nuimkite nuo kasetės adatos apsaugą.
3. While holding the tonearm lift, carefully release the tonearm clamp.
4. Sureguliuokite atsvarą jį sukdami, kol tonarmas bus idealiai subalansuotas ir plūduriuos horizontaliai.
5. Once balanced, hold the counterweight steady and rotate the numbered ring to '0' (zero).
6. Rotate the entire counterweight counter-clockwise to the recommended tracking force of 2.0 grams (2 on the scale).

Paveikslėlis: detalus view of the Audio Technica AT91 cartridge, highlighting its position on the tonearm.

4. Apsauginės čiuožyklos reguliavimas

Set the anti-skate dial to the same value as your tracking force, which is 2.0 for the AT91 cartridge.

5. Dulkių dangtelio montavimas

Insert the two dust cover hinges into the slots at the rear of the turntable plinth, then attach the dust cover to the hinges.

Image: The Fluance RT80 turntable with its protective dust cover in the open position.

6. Jungtys

Connect the RCA cables from the turntable to your amplifier or powered speakers. Ensure the ground wire is connected to the ground terminal on your ampgelbėtojas, jei yra.

Connect the power adapter to the DC 12V input on the turntable and then plug it into a wall outlet.

Image: The rear connection panel of the turntable, illustrating the RCA outputs, ground terminal, and power input.

Image: The back of the turntable, displaying the various connection ports and switches.

7. Išankstinisamp Perjungti

The RT80 has a built-in Texas Instruments preamp. Use the switch on the rear panel to select between PHONO (BYPASS) if connecting to an amplifier with a dedicated phono input, or LINE if connecting to a standard auxiliary input on an ampkeltuvai arba maitinami garsiakalbiai.

Naudojimo instrukcijos

Groti įrašą

1. Place a record on the felt slip mat.
2. Select the appropriate speed (33 1/3 RPM or 45 RPM) using the speed selector knob. Use the 45 adapter for 7-inch singles if needed.
3. Pakelkite tonarmą naudodami tonarmo svirtį.
4. Uždėkite tonarmą virš norimo plokštelės pradinio griovelio.
5. Gently lower the cueing lever to allow the stylus to descend onto the record.
6. At the end of the record, the auto-stop feature will engage, and the platter will stop spinning.
7. Lift the tonearm using the cueing lever and return it to the tonearm rest. Secure it with the tonearm clamp.

Automatinio sustabdymo funkcija

The RT80 features an auto-stop function that automatically stops the platter rotation when the tonearm reaches the end of a record. This helps prevent unnecessary wear on the stylus and record. The auto-stop function can be toggled ON/OFF via a switch on the rear panel.

Įrašų priežiūra

• Always handle records by their edges to avoid transferring oils from your skin.
• Laikykite plokšteles vertikaliai jų dėkluose, kad jos nedeformuotųsi.
• Clean records regularly with a carbon fiber brush or a record cleaning solution to remove dust and static.

Priežiūra

Patefono valymas

• Wipe the dust cover and plinth with a soft, dry, lint-free cloth.
• Nenaudokite stiprių chemikalų ar abrazyvinių valiklių.
• For the platter and tonearm, use a slightly damp jei reikia, šluoste, tada nedelsdami nusausinkite.

Rašiklio priežiūra

• Clean the stylus regularly using a soft brush designed for stylus cleaning, brushing from back to front.
• A dirty stylus can damage your records and degrade sound quality.
• Replace the stylus after approximately 300-500 hours of playback, or if you notice a decrease in sound quality or increased distortion.

Diržo keitimas

The rubber drive belt may stretch or degrade over time. If you notice inconsistent speed or a decrease in playback quality, the belt may need to be replaced. Contact Fluance support for replacement belts.

Trikčių šalinimas

Specifikacijos

Garantija ir palaikymas

Your Fluance RT80 turntable comes with a 2 metų gamintojo garantija, ensuring peace of mind regarding your purchase. Fluance also offers Klientų aptarnavimas visą gyvenimą.

For technical assistance, warranty claims, or general inquiries, please visit the official Fluance website or contact their customer support directly. You can also refer to the Vartotojo vadovas (PDF) or Montavimo vadovas (PDF) provided by Fluance for additional information.