Įvadas
The BWT Aquameter LF (Low Flow) is designed to precisely monitor the volume of water that has passed through your water filter system. This device helps ensure timely filter replacement, maintaining optimal water quality for applications such as espresso machines. It features an LCD display for real-time capacity tracking and is compatible with various BWT water filters, including Bestmax and Besttaste series.
Produktas baigtasview
1 paveikslas: BWT Aquameter LF control unit with LCD display and separate flow sensor, connected by a cable. This image shows the main components of the Aquameter LF system.
2 paveikslas: The packaging for the BWT Aquameter LF, indicating its 3/8" connection and NSF certification. The packaging also displays the product number 812136 and GTIN 04250266700169.
Sąranka ir diegimas
- Išpakuokite komponentus: Carefully remove the BWT Aquameter LF control unit, flow sensor, and connecting cable from the packaging.
- Identify Flow Direction: The flow sensor has an arrow indicating the direction of water flow. Ensure this aligns with your water line.
- Connect Flow Sensor: Install the 3/8" flow sensor into the water line before your BWT water filter. Use appropriate plumbing fittings to ensure a secure, leak-free connection.
3 paveikslas: The BWT Aquameter LF control unit mounted on a wall, connected to a BWT Bestmax water filter installed under a sink. This illustrates a typical installation setup.
- Prijunkite valdymo bloką: Plug the cable from the flow sensor into the designated port on the BWT Aquameter LF control unit.
- Valdymo bloko montavimas: Mount the control unit in a convenient location using the provided mounting hardware. Ensure the display is easily visible.
4 paveikslas: Iš arti view of the BWT Aquameter LF control unit mounted, showing the LCD display, "PROG." and "RESET" buttons, and the CE mark. The cable connecting to the flow sensor is visible.
- Pradinis programavimas:
- Press and hold the "PROG." button to enter programming mode.
- Use the "PROG." button to cycle through settings (e.g., total filter capacity in liters).
- Use the "RESET" button to adjust the values for each setting.
- Confirm settings by pressing "PROG." again or waiting for the unit to exit programming mode automatically.
- Set the filter capacity according to your specific BWT filter model and local water hardness.
Naudojimo instrukcijos
- Monitoring Water Volume: The LCD display continuously shows the remaining filter capacity in liters. As water flows through the filter, the displayed value decreases.
- Filtro keitimo indikatorius: When the displayed capacity reaches a low level or zero, it indicates that the water filter needs to be replaced. Refer to your specific BWT filter's documentation for recommended replacement intervals.
- Resetting the Meter: After replacing the water filter, press and hold the "RESET" button for at least 3 seconds to reset the meter to its programmed initial capacity. This action ensures accurate tracking for the new filter.
Priežiūra
- Filtro keitimas: Regularly replace your BWT water filter according to the manufacturer's recommendations or when the Aquameter LF indicates zero remaining capacity. This ensures continued water quality and system performance.
- Valymas: Wipe the exterior of the Aquameter LF control unit with a soft, damp audinys. Nenaudokite abrazyvinių valiklių ar tirpiklių.
- Baterijos keitimas: The Aquameter LF operates on internal batteries. If the display becomes dim or unresponsive, the batteries may need replacement. Consult a qualified technician or BWT support for battery replacement procedures.
Trikčių šalinimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Ekranas tuščias arba blankus. | Žemas arba išsikrovusios baterijos. | Contact BWT support for battery replacement. |
| Capacity not decreasing. | Flow sensor incorrectly installed or faulty. No water flow detected. | Check flow sensor installation, ensuring correct flow direction. Verify water flow through the system. |
| Incorrect capacity reading after filter change. | Meter not reset after filter replacement. | Press and hold the "RESET" button for 3 seconds to reset the meter. |
| Vandens nuotėkis jungtyse. | Loose fittings or improper sealing. | Ensure all plumbing connections are tight and properly sealed with appropriate thread sealant or tape. |
Specifikacijos
- Modelio numeris: 812195
- Medžiaga: Akrilnitrilo butadieno stirenas (ABS)
- Gaminio matmenys: 2.4 "D x 4.8" P x 4.1" A
- Flow Rate (Low Flow): 10–100 liters/hour
- Ryšio dydis: 3/8 colio
- Prekės svoris: 7 uncijos
- Išorinio testavimo sertifikavimas: NSF
- Compatible Water Purifier Models: BWT Bestmax, BWT Bestmax PREMIUM, BWT Besttaste
- Pasaulinis prekybos identifikavimo numeris (GTIN): 04250266700169
Informacija apie garantiją
For detailed warranty information regarding your BWT Aquameter LF, please refer to the warranty card included with your product or visit the official BWT websvetainėje. Garantijos sąlygos ir nuostatos gali skirtis priklausomai nuo regiono.
Palaikymas
If you require further assistance, technical support, or have questions about your BWT Aquameter LF, please contact BWT customer service or visit the official BWT store online.
