Steinbach Classic 250N Filtration System

1. Produktas baigtasview

The Steinbach Classic 250N Filtration System is a high-performance sand filter designed to maintain clean and clear water in above-ground pools. This powerful unit is suitable for pools with a capacity of up to 19,000 liters, ensuring efficient removal of impurities. It features a robust pump and a versatile 7-way valve for various operational modes.

2. Saugos informacija

Prieš montuodami ir naudodami atidžiai perskaitykite visas saugos instrukcijas, kad išvengtumėte sužalojimų ar žalos. Išsaugokite šį vadovą ateičiai.

• Prieš atlikdami bet kokius filtro sistemos priežiūros ar valymo darbus, visada atjunkite maitinimo šaltinį.
• Ensure the electrical outlet is protected by a Ground Fault Circuit Interrupter (GFCI) for safety.
• Do not operate the pump if the water temperature exceeds 35°C (95°F).
• Filtro sistemai veikiant, laikykite vaikus atokiau nuo jos.
• Ensure all connections are secure and leak-free to prevent water damage or electrical hazards.
• The pump is not self-priming; ensure it is filled with water before starting.

3. Sąranka ir diegimas

Proper installation is crucial for the optimal performance of your filtration system. Follow these steps carefully:

3.1 Išpakavimas ir komponentų patikrinimas

Patikrinkite, ar yra visi komponentai ir ar jie nepažeisti:

• Filter Tank (250 mm diameter)
• Pump Unit (230V / 200W)
• 7-Way Multi-Port Valve with Pressure Gauge
• Connecting Hoses (32/38 mm diameter)
• Pagrindo plokštė
• Clamps and Fittings

3.2 Filter Media Preparation

The system requires approximately 10 kg of filter sand with a granule size of 0.7 - 1.2 mm, or compatible filter balls. Refer to the specific instructions for filling the filter tank with your chosen media.

3.3 Surinkimas ir prijungimas

1. Place the base plate on a firm, level surface near your pool.
2. Mount the filter tank and pump securely onto the base plate.
3. Connect the pump to the filter tank and the multi-port valve using the provided hoses and fittings. Ensure all connections are tight to prevent leaks.
4. Connect the system to your pool's skimmer and return lines using 32/38 mm hoses.

3.4 Optimalus išdėstymas

For gravity-fed operation, the water level in the pool should be above the sand filter. Avoid situations where the water level is below the filter, as this can hinder proper flow and operation.

4. Naudojimo instrukcijos

The 7-way multi-port valve allows for different operational modes. Always turn off the pump before changing the valve position.

• FILTRAS: This is the standard operating mode for daily filtration. Water is pumped through the filter media, and clean water is returned to the pool.
• BACKWASH: Used to clean the filter media. Water flows in reverse through the filter, dislodging trapped debris, which is then discharged to waste. Perform when pressure gauge indicates high pressure.
• IŠSKALAUTI: Used after backwashing to flush out any remaining debris from the filter media and lines before returning to FILTER mode. Water is discharged to waste.
• WASTE (EMPTY): Apeina filtrą ir pumpuoja vandenį tiesiai iš baseino į nuotekas. Naudinga norint sumažinti baseino vandens lygį arba susiurbti sunkias šiukšles tiesiai į nuotekas.
• RECIRCULATE (CIRCULATE): Apeina filtrą ir cirkuliuoja vandenį tiesiai atgal į baseiną. Naudinga chemikalų paskirstymui be filtravimo.
• UŽDARYTA: Closes all flow to the filter. Use only when the pump is off and for maintenance tasks that require isolating the filter.

To start operation, ensure the valve is set to FILTER, then turn on the pump. Monitor the pressure gauge for normal operating pressure.

5. Priežiūra

Regular maintenance ensures the longevity and efficiency of your Steinbach filtration system.

5.1 Atbulinis plovimas ir skalavimas

Perform backwashing when the pressure gauge reading is 0.2-0.3 bar (3-5 psi) above the clean filter pressure, or when water flow to the pool decreases significantly. Follow with a rinse cycle.

1. Išjunkite siurblį.
2. Nustatykite vožtuvą į BACKWASH padėtį.
3. Turn on the pump and backwash until the water in the sight glass (if present) runs clear (typically 2-3 minutes).
4. Išjunkite siurblį.
5. Nustatykite vožtuvą į RINSE.
6. Turn on the pump and rinse for 30-60 seconds.
7. Išjunkite siurblį.
8. Set the valve back to FILTER.
9. Įjunkite siurblį, kad atnaujintumėte įprastą filtravimą.

5.2 Filter Media Replacement

Filter sand typically needs replacement every 3-5 years, depending on usage and water quality. Filter balls may require periodic cleaning or replacement as per their specific instructions.

5.3 Žieminimas

Before freezing temperatures, drain all water from the pump, filter tank, and hoses. Store the pump and valve in a dry, frost-free location. Cover the filter tank if it remains outdoors.

6. Problemų sprendimas

Dažniausiai pasitaikančias problemas ir galimus jų sprendimus rasite šiame skyriuje.

7. Techninės specifikacijos

8. Garantija ir palaikymas

For specific warranty details and terms, please refer to the documentation provided with your purchase. In general, products purchased through Amazon may be eligible for returns or replacements within 30 days, subject to Amazon's return policy.

For technical support, spare parts, or further assistance, please contact Steinbach customer service. Contact information can typically be found on the manufacturer's websvetainėje arba ant produkto pakuotės.