Produktas baigtasview
The Alpine Hemlock Hand Dryer is a heavy-duty, high-speed commercial hand dryer designed for efficient and hygienic hand drying. Constructed from durable stainless steel, it offers quick drying times and is suitable for various commercial and public restroom environments. This manual provides essential information for the safe and proper installation, operation, and maintenance of your hand dryer.
Vaizdas: priekis view of the Alpine Hemlock Hand Dryer, highlighting its heavy-duty design and compliance.
Pagrindinės savybės
- Greitas džiūvimas: Dries hands in approximately 8-10 seconds.
- Galingas našumas: Features a motor speed of 22,000 RPM and a wind speed of 200 MPH.
- Reguliuojama šiluma: Provides heated air between 45-65°C.
- Automatinis veikimas: Equipped with an automatic motion sensor with a sensing distance of 5 +/- 1 inch.
- Patvari konstrukcija: Made from heavy-duty, corrosion-proof stainless steel for long-lasting use.
- Energiją taupantis: Designed to be cost-efficient, offering up to 95% savings compared to paper towels.
- Lankstus montavimas: Supports both simple plug-in and hard-wired power options.
- Sauga ir atitiktis: UL Listed and ADA Compliant.
Image: Visual representation of the hand dryer's motor speed, wind speed, and heat settings.
Image: Diagram showing the cost efficiency of the hand dryer versus paper towel usage.
Montavimas
Pakuotės turinys
Prieš pradėdami diegti, patikrinkite, ar yra visi komponentai:
- Alpine Hemlock Hand Dryer Unit
- Tvirtinimo varžtai
- Sieniniai inkarai
- Poveržlės
- Allen veržliarakčiai
Image: Hand dryer dimensions and a visual of the included mounting hardware.
Montavimo instrukcijos
- Pasirinkite vietą: Choose a suitable wall location, ensuring adequate space around the unit for proper operation and maintenance. Consider ADA compliance guidelines for height and clearance.
- Gręžimo taškų žymėjimas: Use the mounting template (if provided, or measure according to the unit's backplate) to mark the drilling points on the wall.
- Gręžimo skylės: Drill pilot holes at the marked locations. Insert wall anchors if mounting into drywall or hollow surfaces.
- Tvirta tvirtinimo plokštė: Attach the hand dryer's mounting plate (if separate) to the wall using the provided screws and washers.
- Elektros jungtis:
- Įskiepio parinktis: If using the plug-in option, ensure a compatible 110-120V outlet is available near the installation site.
- Hard-Wired Option: For hard-wired installations, it is recommended to consult a qualified electrician. Ensure power is disconnected at the circuit breaker before making any electrical connections. Connect the hand dryer's wiring to the building's electrical supply according to local electrical codes.
- Rankų džiovintuvo pritvirtinimas: Carefully align the hand dryer unit with the mounting plate and secure it using the remaining screws or locking mechanism.
- Bandomoji operacija: Atkurkite elektros tiekimą ir patikrinkite rankų džiovintuvą, kad įsitikintumėte, jog jis veikia tinkamai.
Image: Illustration of the two available power options: simple plug-in and hard-wired.
Operacija
The Alpine Hemlock Hand Dryer operates automatically using an infrared motion sensor.
- Suaktyvinti: Place your hands directly under the air outlet. The sensor will detect your hands and activate the air blower. A blue light will illuminate to indicate operation.
- Sausos rankos: Move your hands slowly back and forth under the airflow to ensure even drying. The powerful air stream and heated air will dry your hands quickly.
- Išjungti: Remove your hands from the sensor's range. The hand dryer will automatically shut off after a few seconds.
Image: Diagram illustrating the optimal hand placement and sensing distance for automatic operation.
Priežiūra
Regular maintenance ensures optimal performance and longevity of your hand dryer.
- Išorinis valymas: Nerūdijančio plieno išorę nuvalykite minkšta, d šluosteamp cloth and a mild, non-abrasive cleaner. Avoid harsh chemicals or abrasive pads that could scratch the finish.
- Oro įleidimo grotelės: Periodically check the air inlet grille for dust or lint accumulation. Clean with a soft brush or vacuum cleaner to maintain proper airflow.
- Jutiklio valymas: Ensure the motion sensor lens is clean and free from obstructions. Wipe gently with a soft cloth.
- Patikra: Regularly inspect the power cord (if plug-in) and mounting for any signs of damage or loosening.
Trikčių šalinimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Hand dryer does not activate. | No power supply; Sensor obstructed or dirty; Hands not within sensing range. | Check power connection/circuit breaker; Clean sensor; Place hands within 5 +/- 1 inch of outlet. |
| Weak airflow or slow drying. | Air inlet grille obstructed; Motor issue. | Clean air inlet grille; Contact customer support if problem persists. |
| Hand dryer runs continuously. | Sensor malfunction; Obstruction in sensor path. | Remove any obstructions; Clean sensor; Contact customer support. |
Specifikacijos
- Modelis: B01M0QQ9Z2
- Matmenys (A x P x G): 12.31 x 11.40 col. x 6.68 col
- Svoris: 10.96 svarai (4.97 kg)
- Elektros specifikacijos: 110-120 Volts, 50/60 Hz
- Power Consumption (Heating Element ON): 1240-1800 Watts (15 Amps)
- Power Consumption (Heating Element OFF): 700 vatai (5.8 Amps)
- Variklio greitis: 22,000 aps./min
- Vėjo greitis: 200 mylių per valandą
- Oro temperatūra: 45-65°C
- Džiūvimo laikas: 8-10 sekundžių
- Medžiaga: Heavy-Duty Stainless Steel
- Sertifikatai: UL Listed, ADA Compliant
Garantija ir palaikymas
The Alpine Hemlock Hand Dryer comes with a 5 metų ribota garantija. This warranty covers defects in materials and workmanship under normal use and service. For warranty claims, technical support, or any inquiries, please contact Alpine Industries customer service.
Prašome išsaugoti pirkimo įrodymą garantijos galiojimui.
Image: Visual representation of the 5-year limited warranty coverage.
