BEST LEDR-1 LED Emergency Light User Manual

1. Įvadas

This manual provides essential instructions for the safe installation, operation, and maintenance of your BEST LEDR-1 LED Emergency Light. Please read this manual thoroughly before installation and retain it for future reference. The LEDR-1 is designed to provide reliable emergency illumination during power outages, ensuring safety in commercial and residential environments.

2. Svarbios saugos instrukcijos

ĮSPĖJIMAS: Elektros smūgio pavojus. Prieš montuodami ar atlikdami techninę priežiūrą, atjunkite maitinimą.

• Visus techninės priežiūros darbus turi atlikti tik kvalifikuoti darbuotojai.
• Nemontuokite šalia dujinių ar elektrinių šildytuvų.
• Ensure the electrical wiring is properly grounded.
• Nenaudokite lauke. Šis įrenginys skirtas naudoti tik patalpose.
• Neleiskite maitinimo laidams liesti karštų paviršių.
• Mount the unit in locations and at heights where it will not be subjected to tampneleistino personalo.
• Gamintojo nerekomenduotos papildomos įrangos naudojimas gali sukelti nesaugią būklę.
• Nenaudokite šios įrangos ne pagal paskirtį.
• Allow battery to charge for a minimum of 24 hours after installation before testing.

3. Pakuotės turinys

Atidarę pakuotę, patikrinkite, ar yra visi komponentai ir ar jie nepažeisti:

• BEST LEDR-1 LED Emergency Light Fixture (1 unit)
• Tvirtinimo detalės (varžtai, inkarai)
• Vielos veržlės
• Vartotojo vadovas (šis dokumentas)
• AA NiCAD Battery (pre-installed or included separately)

4. Produktas baigtasview

The BEST LEDR-1 is a compact and efficient LED emergency light designed for wall-mount applications. It features a durable white thermoplastic housing and two adjustable LED lamp heads, providing 98 lumens of bright, white light (5000 Kelvin) during emergency situations. The unit operates on 120 Volts AC and includes a rechargeable NiCAD battery for backup power.

1 pav.: priekis view of the BEST LEDR-1 Emergency Light. This image shows the compact white thermoplastic housing with two adjustable LED lamp galvos.

Pagrindinės funkcijos:

• Būstas: White Thermoplastic
• Šviesos šaltinis: 2 LED heads
• ttage: 120 voltų kintamoji srovė
• Baterija: NiCAD, 90 minutes average life
• Šviesos išvestis: 98 liumenų
• Matmenys: Maždaug 14.75 cm ilgio x 3.75 cm pločio x 3.75 cm aukščio

5. Montavimas

The LEDR-1 is designed for flush wall mounting. Follow these steps for proper installation:

1. Maitinimo atjungimas: Before beginning any installation, ensure that the main power supply to the circuit where the emergency light will be installed is turned OFF at the circuit breaker or fuse box.
2. Montavimo vieta: Select a suitable wall location for mounting. The unit should be mounted at a height and in a position that allows for optimal light distribution during an emergency. Ensure the mounting surface is solid and can support the fixture's weight.
3. Paruoškite montavimo paviršių: Use the provided mounting hardware (screws and anchors) to secure the mounting plate or backplate of the emergency light to the wall. If the unit has a separate mounting plate, attach it first.
4. Laidų jungtys:
   • Prijunkite juoda viela from the emergency light to the hot (live) wire from the building's electrical supply.
   • Prijunkite balta viela from the emergency light to the neutralus laidas from the building's electrical supply.
   • Prijunkite žalia viela from the emergency light to the įžeminimo laidas from the building's electrical supply.
   • Use the provided wire nuts to secure all connections. Ensure all connections are tight and properly insulated.
5. Baterijos prijungimas: If the battery is not pre-connected, connect the battery pack to the circuit board. Ensure correct polarity.
6. Saugus tvirtinimas: Carefully tuck all wires into the junction box or fixture housing. Secure the emergency light fixture to the mounting plate or wall according to the specific design of the unit.
7. Atkurti maitinimą: Once the installation is complete and all connections are secure, restore power to the circuit. The CHARGE INDICATOR light on the unit should illuminate, indicating that the battery is charging.
8. Pradinis mokestis: Allow the battery to charge for a minimum of 24 hours before performing the first test.

6. Operacija

The BEST LEDR-1 Emergency Light operates automatically:

• Kintamosios srovės maitinimas: When AC power is supplied to the unit, the charge indicator light will be ON, and the battery will be charging. The LED lamp heads will remain OFF.
• Galia Outage: In the event of an AC power failure, the emergency light will automatically switch to battery backup mode, and the LED lamp heads will illuminate. The unit will provide emergency lighting for approximately 90 minutes.
• AC Power Restored: When AC power is restored, the LED lamp heads will turn OFF, and the unit will revert to charging the battery.
• Bandymo mygtukas: A test button is located on the unit. Pressing this button simulates an AC power failure, allowing you to verify that the emergency lights function correctly. Release the button to return to normal operation.
• Reguliuojamas Lamp Galvos: The two LED lamp heads can be manually adjusted to direct light to desired areas.

7. Priežiūra

Regular maintenance ensures the longevity and reliability of your emergency light.

Baterijos bandymas:

Perform the following tests according to local codes and regulations (typically monthly and annually):

• Mėnesio testas: Press and hold the test button for at least 30 seconds. The LED lamp heads should illuminate. Release the button; the lights should turn off, and the charge indicator should be ON.
• Metinis testas: Disconnect AC power to the unit for a full 90 minutes. The LED lamp heads should remain illuminated for the entire duration. Reconnect AC power; the lights should turn off, and the charge indicator should be ON. If the unit fails to operate for the full 90 minutes, the battery may need replacement.

Valymas:

Clean the exterior of the unit and lamp heads periodically with a soft, damp audinys. Nenaudokite abrazyvinių valiklių ar tirpiklių.

Baterijos keitimas:

The NiCAD battery has a limited lifespan. If the unit fails the annual 90-minute test, the battery likely needs replacement. Contact a qualified electrician or the manufacturer for battery replacement instructions and compatible battery types.

8. Problemų sprendimas

9. Specifikacijos

10. Garantija ir palaikymas

The BEST LEDR-1 LED Emergency Light comes with a full manufacturer warranty. For specific warranty details, claims, or technical support, please refer to the warranty card included with your product or contact Best Lighting Products directly. Keep your purchase receipt as proof of purchase.

For assistance, please contact Best Lighting Products customer service.