Sigma Cadence Magnet Instruction Manual

1. Įvadas

The Sigma Cadence Magnet is a compact accessory designed to work in conjunction with a compatible cadence sensor to measure your pedaling rate during cycling activities. This magnet is a crucial component for accurate cadence data collection, enhancing your training and performance analysis.

Suderinamumas: This cadence magnet is compatible with all Sigma cadence transmitters across various product lines. It is designed to fit securely into the hexagonal recess of most pedal crank arms.

Pakuotės turinys: The package typically includes the cadence magnet and one or more plastic holders designed to accommodate different pedal crank hex key sizes.

2. Saugos informacija

• Ensure the magnet is securely installed to prevent it from detaching during cycling, which could pose a safety risk or cause loss of the product.
• Keep magnets away from sensitive electronic devices, credit cards, and pacemakers to avoid interference or damage.
• Šis gaminys nėra žaislas. Laikyti mažiems vaikams nepasiekiamoje vietoje.

3. Sąranka ir diegimas

Proper installation of the Sigma Cadence Magnet is essential for accurate cadence measurement. Follow these steps:

1. Identify Pedal Crank Recess: Locate the hexagonal recess on the inside of your bicycle's pedal crank arm. This is typically where an Allen key would be inserted to tighten or remove the pedal.
2. Select Holder (if applicable): If your package includes multiple plastic holders, select the one that best fits the hexagonal recess of your pedal crank arm. The fit should be snug.
3. Insert Magnet into Holder: Carefully insert the metallic cadence magnet into the designated slot within the chosen plastic holder. Ensure it is seated firmly.
4. Montažo įrengimas: Insert the magnet-holder assembly into the hexagonal recess of your pedal crank arm. Push it in firmly until it is securely seated. The fit should be tight enough to prevent it from falling out during use.
5. Padėties nustatymas: Ensure the magnet is positioned correctly relative to your cadence sensor. The sensor typically needs to be mounted on the chainstay, close enough for the magnet to pass within its detection range with each pedal rotation. Refer to your cadence sensor's manual for specific distance requirements.

4. Operacija

The Sigma Cadence Magnet is a passive component. Once correctly installed on your pedal crank arm, it works by passing a compatible cadence sensor (sold separately) with each rotation of the crank. The sensor detects the magnetic field and transmits this information to your cycling computer or device, which then calculates and displays your pedaling cadence (revolutions per minute).

No user interaction is required with the magnet itself during operation, beyond ensuring its secure attachment.

5. Priežiūra

To ensure the longevity and reliable performance of your Sigma Cadence Magnet, consider the following maintenance tips:

• Valymas: Periodically wipe the magnet and its holder with a damp cloth to remove dirt, dust, and grime. Avoid using harsh chemicals or abrasive materials.
• Check Secure Fit: Before each ride, quickly check that the magnet is still firmly seated in the pedal crank recess. If it feels loose, re-insert it or consider replacing the plastic holder if it appears worn.
• Patikra: Occasionally inspect the plastic holder for any signs of cracks or damage. A damaged holder may not secure the magnet effectively.

6. Problemų sprendimas

If you experience issues with cadence detection, consider these troubleshooting steps:

• Cadence Not Detected:
  • Check Magnet Position: Ensure the magnet is securely installed in the pedal crank arm.
  • Jutiklio lygiavimas: Verify that your cadence sensor is correctly aligned with the magnet and within the recommended detection distance. Refer to your sensor's manual.
  • Jutiklio baterija: If your cadence sensor is battery-powered, check its battery level.
  • Poravimas: Confirm that your cadence sensor is properly paired with your cycling computer or device.
• Magnet Lost: If the magnet detaches during a ride, it will need to be re-installed or replaced. Ensure the plastic holder provides a sufficiently tight fit.

7. Specifikacijos

8. Garantija ir palaikymas

For warranty information, technical support, or any product-related inquiries, please refer to the official Sigma Sport websvetainėje arba susisiekite tiesiogiai su jų klientų aptarnavimo tarnyba. Išsaugokite pirkimo įrodymą garantiniams reikalavimams.

Sigma Sport Official Websvetainė: www.sigmasport.com