RISCO RK815DTG300B Dual Technology Detector

1. Įvadas

This manual provides detailed instructions for the installation, operation, and maintenance of the RISCO RK815DTG300B Dual Technology Detector. This device combines Passive Infrared (PIR) and Microwave (MW) detection technologies to offer reliable and accurate motion sensing for security applications. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.

2. Produkto ypatybės

The RISCO RK815DTG300B detector is designed with advanced features to enhance security and minimize false alarms:

• Dual Technology Detection: Combines dual-element PIR and 10.25 GHz Microwave for superior detection and false alarm immunity.
• Anti-Cloak Technology (ACT) Green Line: Deactivates the microwave channel when the system is disarmed, reducing power consumption and extending product life.
• Active Infrared Anti-Masking: Detects attempts to block the detector's field of view, providing enhanced tamper apsauga.
• Selectable End-of-Line (EOL) Resistors: Configurable via jumpers for flexible wiring with various control panels.
• Tamper Apsauga: Features anti-opening and anti-dismount (wall/angle) tamper switches to alert against unauthorized access or removal.
• Adjustable Microwave Sensitivity: Allows fine-tuning of the microwave detection range.
• Advanced Detection Zones: Provides 30 detection zones across 4 levels with anti-radiation features.
• Vizualiniai indikatoriai: Equipped with 3 LED indicators for status and detection events.
• True Temperature Compensation: Ensures consistent detection performance across varying ambient temperatures.
• High Immunity: Excellent immunity to Radio Frequency (RF) interference and white light, reducing false alarms.

3. Saugos informacija

Prašome laikytis šių saugos priemonių:

• Installation should be performed by qualified personnel only, in accordance with local electrical codes and regulations.
• Prieš atlikdami bet kokius laidų prijungimo ar techninės priežiūros darbus, atjunkite maitinimą.
• Nelaikykite įrenginio drėgmės, tiesioginių saulės spindulių ar ekstremalių temperatūrų veikiamo.
• Įsitikinkite, kad tvirtinimo paviršius yra stabilus ir tvirtas.
• Saugokite įrenginį nuo stiprių elektromagnetinių laukų.

4. Pakuotės turinys

Patikrinkite, ar pakuotėje yra visi reikalingi daiktai:

• RISCO RK815DTG300B Dual Technology Detector unit
• Tvirtinimo varžtai ir inkarai
• Installation Guide / User Manual (this document)
• Optional lenses (if purchased separately)

5. Sąranka ir diegimas

Tinkamas įrengimas yra labai svarbus optimaliam veikimui. Atidžiai atlikite šiuos veiksmus:

5.1 Montavimo vieta

Choose a mounting location that provides the best coverage of the protected area. Avoid placing the detector directly facing heat sources, windows, or areas with strong air currents. The ideal mounting height is typically 2.1 to 2.7 meters (7 to 9 feet) above the floor.

5.2 Detektoriaus atidarymas

Atsargiai atidarykite detektorių casing pagal releasing the locking tab, usually located at the bottom or side of the unit. This will expose the terminal block and jumper settings.

5.3 Laidai

Connect the detector to the control panel according to the panel's instructions and the detector's terminal markings. Ensure correct polarity for power connections. Utilize the selectable EOL resistors via jumpers as required by your security system.

Terminalo jungtys:

• + / - : Power input (typically 9-16 VDC).
• ALARMAS: Normally Closed (NC) alarm output.
• TAMPER: Paprastai uždarytas (NC) tamper išvestis.
• KAUKĖ: Anti-masking output (if used).

5.4 „Jumper“ nustatymai

Configure the jumpers for EOL resistors, microwave sensitivity, and ACT Green Line functionality as needed for your specific installation.

5.5 Detektoriaus montavimas

Secure the detector base to the wall or corner using the provided screws and anchors. Ensure the tamper switch is properly engaged with the mounting surface.

Figure 1: RISCO RK815DTG300B Dual Technology Detector. This image shows the front view of the detector, typically mounted on a wall or in a corner, indicating its compact design and sensor window.

5.6 Ėjimo testas

After installation, perform a walk test to verify the detection coverage. Walk through the protected area and observe the LED indicators to confirm proper detection. Adjust the microwave sensitivity if necessary.

6. Naudojimo instrukcijos

The RK815DTG300B detector operates automatically once powered and configured. It continuously monitors the protected area using both PIR and Microwave technologies.

6.1 Detection Logic

For an alarm to be triggered, both the PIR and Microwave sensors must detect motion simultaneously (AND logic), significantly reducing false alarms compared to single-technology detectors.

6.2 LED indikatoriai

The detector features three LEDs to indicate its status:

• PIR LED: Illuminates when the PIR sensor detects motion.
• MW LED: Illuminates when the Microwave sensor detects motion.
• ALARM LED: Illuminates when both PIR and MW detect motion, triggering an alarm.

6.3 Anti-Cloak Technology (ACT) Green Line

When enabled, the ACT Green Line feature automatically deactivates the microwave sensor when the security system is disarmed. This conserves energy and extends the lifespan of the microwave component. The microwave sensor reactivates automatically when the system is armed.

7. Priežiūra

The RISCO RK815DTG300B detector requires minimal maintenance to ensure continued reliable operation.

• Valymas: Periodiškai valykite detektoriaus lęšį irasinminkštu, sausu skudurėliu. Nenaudokite abrazyvinių valiklių ar tirpiklių.
• Patikra: Annually inspect the detector for any signs of damage, loose wiring, or obstructions to its field of view.
• Ėjimo testas: Perform a walk test periodically (e.g., every 6-12 months) to confirm the detector is functioning correctly.

8. Problemų sprendimas

If you experience issues with your detector, refer to the following common problems and solutions:

If the problem persists, contact your security system installer or RISCO technical support.

9. Specifikacijos

10. Garantija ir palaikymas

For warranty information, please refer to the documentation provided with your purchase or visit the official RISCO Group website. For technical support, contact your authorized RISCO installer or the RISCO customer service department.

RISCO grupė Websvetainė: www.riscogroup.com