NVIDIA 699-51030-0501-101

NVIDIA 699-51030-0501-101 Graphics Card User Manual

Įvadas

This manual provides essential information for the installation, operation, maintenance, and troubleshooting of your NVIDIA 699-51030-0501-101 graphics card. This component is designed for desktop computer systems to enhance graphics processing capabilities. Please read this manual thoroughly before proceeding with installation or use.

NVIDIA 699-51030-0501-101 Graphics Card

Image: NVIDIA 699-51030-0501-101 Graphics Card. This image displays the graphics card from an angled perspective, showing the cooling fan, heatsink, and the PCIe connector.

Saugos gairės

Kad nesugadintumėte gaminio ar nesusižalotumėte, laikykitės šių saugos priemonių:

  • Prieš įdiegdami arba išimdami bet kokius komponentus, visada atjunkite kompiuterį nuo maitinimo.
  • Dėvėkite antistatinį riešo dirželį arba dažnai lieskite įžemintą metalinį objektą, kad iškrautumėte statinę elektrą.
  • Imkite vaizdo plokštę už kraštų, kad neliestumėte jautrių komponentų.
  • Užtikrinkite tinkamą vėdinimą kompiuterio korpuse, kad išvengtumėte perkaitimo.
  • Saugokite gaminį nuo drėgmės ir ekstremalių temperatūrų.

Sąranka

1. Patikrinimai prieš diegimą

  • Patikrinkite, ar jūsų maitinimo blokas (PSU) turi pakankamai galiostage and appropriate connectors for the graphics card.
  • Ensure your motherboard has an available PCI Express (PCIe) x16 slot.
  • Confirm your computer case has adequate space for the graphics card dimensions.
  • Surinkite reikiamus įrankius: kryžminį atsuktuvą, antistatinį riešo dirželį (rekomenduojama).

2. Techninės įrangos diegimas

  1. Išjunkite ir atjunkite: Visiškai išjunkite kompiuterį ir atjunkite maitinimo laidą nuo sieninio lizdo.
  2. Atvira byla: Nuimkite kompiuterio korpuso šoninį skydelį, kad pasiektumėte pagrindinę plokštę.
  3. Raskite PCIe lizdą: Raskite laisvą PCI Express x16 lizdą savo pagrindinėje plokštėje. Paprastai tai yra ilgiausias lizdas.
  4. Nuimkite lizdo dangtelį: Remove the metal slot cover(s) from the back of your computer case corresponding to the PCIe slot you will use.
  5. Įdėkite vaizdo plokštę: Carefully align the graphics card with the PCIe slot. Press down firmly and evenly on both ends of the card until it is fully seated in the slot. You should hear a click from the retention clip.
  6. Saugi kortelė: Secure the graphics card to the computer case using the screw(s) removed from the slot cover(s).
  7. Prijunkite maitinimą (jei taikoma): If your graphics card requires additional power, connect the appropriate PCIe power cables from your PSU to the graphics card. This model (NVIDIA 699-51030-0501-101) may not require external power, but always check the card itself for connectors.
  8. Uždaryti bylą: Pakeiskite kompiuterio korpuso šoninį skydelį.
  9. Iš naujo prijunkite periferinius įrenginius: Reconnect your monitor cable to one of the display outputs on the new graphics card. Reconnect all other peripherals and the power cord.

3. Tvarkyklės diegimas

  1. Maitinimas: Įjunkite kompiuterį.
  2. Atsisiųsti tvarkykles: Navigate to the official NVIDIA websvetainė (www.nvidia.com/drivers) and download the latest drivers compatible with your NVIDIA 699-51030-0501-101 graphics card and operating system.
  3. Įdiegti tvarkykles: Run the downloaded driver installer and follow the on-screen instructions. It is recommended to perform a clean installation if prompted.
  4. Paleisti iš naujo: Baigę tvarkyklės diegimą, paleiskite kompiuterį iš naujo.

Veikiantis

Once installed and drivers are updated, your NVIDIA 699-51030-0501-101 graphics card will automatically handle graphics processing for your system. You can verify its operation through your operating system's device manager or NVIDIA Control Panel.

  • NVIDIA valdymo skydas: Access the NVIDIA Control Panel (usually via right-click on desktop or through Windows Control Panel) to adjust display settings, 3D settings, and monitor various aspects of your graphics card.
  • Tvarkyklės atnaujinimai: Reguliariai tikrinkite NVIDIA website for driver updates to ensure optimal performance and compatibility with new software and games.

Priežiūra

Tinkama priežiūra užtikrina jūsų vaizdo plokštės ilgaamžiškumą ir optimalų našumą.

  • Dulkių šalinimas: Periodically (e.g., every 6-12 months), power off and unplug your computer. Open the case and use compressed air to gently clear dust from the graphics card's heatsink and fan. Hold the fan blades to prevent over-spinning during cleaning.
  • Aplinkos sąlygos: Operate your computer in a clean, dry, and well-ventilated environment. Avoid extreme temperatures and humidity.

Trikčių šalinimas

Jei kyla problemų, vadovaukitės toliau pateiktais įprastais trikčių šalinimo veiksmais.

  • Nėra ekrano išvesties:
    • Įsitikinkite, kad monitoriaus kabelis yra tvirtai prijungtas prie grafikos plokštės ir monitoriaus.
    • Verify the monitor is set to the correct input source.
    • Check if the graphics card is fully seated in its PCIe slot.
    • If applicable, ensure all PCIe power connectors are securely attached.
    • Jei įmanoma, išbandykite su kitu monitoriumi arba kabeliu.
  • Vairuotojo problemos:
    • Reinstall the latest drivers from the NVIDIA websvetainę.
    • Try rolling back to a previous driver version if issues started after an update.
    • Prieš diegdami naujas, naudokite ekrano tvarkyklių pašalinimo programą (DDU) saugiuoju režimu, kad visiškai pašalintumėte senas tvarkykles.
  • Performance Problems (Low FPS, Stuttering):
    • Įsitikinkite, kad tvarkyklės yra atnaujintos.
    • Check for overheating using monitoring software (e.g., MSI Afterburner, HWMonitor). Clean dust if necessary.
    • Verify that your system meets the minimum requirements for the applications or games you are running.
    • Patikrinkite maitinimo bloko (PSU) galiątage; an insufficient PSU can cause performance issues.
  • System Instability (Crashes, Blue Screens):
    • Check for driver conflicts or corruption.
    • Monitor temperatures to rule out overheating.
    • Ensure the graphics card is properly seated and secured.
    • Paleiskite atminties diagnostikos įrankius, kad patikrintumėte, ar nėra RAM problemų.

Techninės specifikacijos

Key specifications for the NVIDIA 699-51030-0501-101 graphics card:

Modelio numerisNVIDIA 699-51030-0501-101
Prekės ženklasNVIDIA
Grafikos koprocesoriusNVIDIA 699-51030
Grafikos procesoriaus gamintojasNVIDIA
Suderinami įrenginiaiDarbalaukis
ASINB01NBI92VC
Pasiekiama pirmoji data8 m. gruodžio 2016 d

Garantija ir palaikymas

This NVIDIA graphics card is covered by the manufacturer's standard warranty. For specific warranty terms, duration, and to register your product, please refer to the official NVIDIA website or contact NVIDIA customer support directly.

For technical assistance, driver downloads, and further support resources, visit the official NVIDIA support portal:

Susiję dokumentai - 699-51030-0501-101

Preview NVIDIA TITAN X naudotojo vadovas: diegimas, funkcijos ir atitiktis
Išsamus NVIDIA TITAN X vaizdo plokštės naudotojo vadovas, kuriame aptariama aparatinės įrangos diegimas, programinės įrangos sąranka su „GeForce Experience“, SLI konfigūracija, HDMI garsas, pagrindinės funkcijos ir atitiktis reglamentams.
Preview NVIDIA GeForce RTX 4070 greitojo paleidimo vadovas
Trumpas NVIDIA GeForce RTX 4070 vaizdo plokštės diegimo ir nustatymo vadovas, įskaitant sistemos specifikacijas, aparatinės įrangos diegimą ir programinės įrangos konfigūraciją.
Preview NVIDIA Quadro RTX NVLink tilto greito paleidimo vadovas
Greitas pradžios vadovas, kaip įdiegti „NVIDIA Quadro RTX NVLink Bridge“, kuris leidžia greitai sujungti suderinamas „Quadro RTX“ vaizdo plokštes profesionalioms reikmėms.
Preview NVIDIA GeForce RTX 2060 SUPER naudotojo vadovas: diegimas ir funkcijos
Šiame NVIDIA naudotojo vadove išsamiai aprašomas „GeForce RTX 2060 SUPER“ vaizdo plokštės diegimas ir naudojimas, įskaitant aparatinės įrangos sąranką, programinės įrangos diegimą, HDMI konfigūraciją ir pagrindines NVIDIA Turing™ architektūros funkcijas.
Preview „NVIDIA GeForce RTX 2080“ naudotojo vadovas: diegimas, funkcijos ir sąranka
Išsamus NVIDIA GeForce RTX 2080 vaizdo plokštės naudotojo vadovas, kuriame išsamiai aprašomas aparatinės įrangos diegimas, programinės įrangos sąranka naudojant „GeForce Experience“, NVLink konfigūracija, HDMI garso sąranka, pagrindinės funkcijos ir atitiktis reglamentams.
Preview NVIDIA Quadro RTX greito paleidimo vadovas
Trumpas NVIDIA Quadro RTX vaizdo plokščių diegimo ir sąrankos vadovas, įskaitant minimalius sistemos reikalavimus, pridedamą įrangą, aparatinės įrangos diegimo veiksmus, ekrano prijungimą ir programinės įrangos diegimą.