1. Įvadas
This manual provides essential information for the safe installation, operation, and maintenance of your Lithonia Lighting BLT Series 2x4 Low Profile LED Troffer Light. Please read these instructions thoroughly before installation and retain them for future reference.
The BLT Series LED Troffer is designed to deliver clean, cool white illumination (4000K) and reliable performance in drop ceilings. Its center-basket style with a curved, ribbed diffuser provides 4000 lumens of uniform light, suitable for various indoor environments such as offices, classrooms, and corridors. The slim 2-3/8 inch depth facilitates installation in restrictive plenum spaces.
2. Saugos informacija
ĮSPĖJIMAS: Elektros smūgio pavojus. Prieš montuodami ar atlikdami techninę priežiūrą, atjunkite maitinimą nuo saugiklio arba grandinės pertraukiklio.
- All electrical connections must be in accordance with local codes and the National Electric Code (NEC).
- Jei nežinote, kaip tinkamai prijungti elektros laidus, kreipkitės į kvalifikuotą elektriką.
- Nemontuokite šio šviestuvo drėgnose vietose. Jis skirtas naudoti su damp vietos.
- Įsitikinkite, kad armatūra yra tinkamai įžeminta, kad išvengtumėte galimų elektros pavojų.
- Nelieskite prietaiso šlapiomis rankomis.
- Patikrinkite, ar tiekimo ttage is compatible with the fixture's requirements (MVOLT 120-277V).
3. Pakuotės turinys
Į paketą įeina šie komponentai:
- 1 x LED Troffer Light Fixture
Note: Additional mounting hardware may be required depending on the installation surface and is not included.
4. Produktas baigtasview
5. Diegimas ir sąranka
The BLT Series LED Troffer Light is designed for easy installation in standard drop ceilings.
- Paruoškite montavimo vietą: Ensure power is disconnected at the circuit breaker. Clear the ceiling grid area where the fixture will be installed.
- Įrenginio padėtis: The fixture's shallow depth (2-3/8 inches) allows for installation in restrictive plenum settings. Carefully lift the fixture into the ceiling grid opening.
- Apsaugokite armatūrą: The end plates of the fixture contain integral T-bar clips. Position these clips to securely attach the luminaire to the T-grid system.
- Elektros jungtys: Connect the fixture's wiring to the building's electrical supply (120-277V) according to local electrical codes. Ensure proper grounding. If dimming functionality is desired, connect the 0-10V dimming wires to a compatible dimming driver.
- Bandomoji operacija: Once all connections are secure and the fixture is properly mounted, restore power and test the light's functionality.
Video 5.1: Demonstration of the Lithonia Lighting BLT Series Low Profile LED Drop in Ceiling Light in an office setting, showcasing its illumination and appearance.
6. Operacija
The Lithonia Lighting BLT Series LED Troffer Light operates by connecting to a standard electrical circuit. Once installed and powered, the light will illuminate.
- Įjungimo / išjungimo valdymas: The light is controlled via a standard wall switch connected to the electrical circuit.
- Pritemdymo funkcija: This fixture is equipped with a generic 0-10 volt dimming driver, allowing it to dim down to 10% of its full brightness. To utilize this feature, the fixture must be connected to a compatible 0-10V dimmer switch (sold separately).
7. Priežiūra
The BLT Series LED Troffer Light requires minimal maintenance.
- Valymas: Prieš valydami, įsitikinkite, kad įrenginys atjungtas nuo elektros tinklo. Naudokite minkštą, sausą arba šiek tiek sudrėkintą šluostę.amp cloth to wipe the exterior surfaces of the fixture. Avoid abrasive cleaners or solvents, as these can damage the finish and diffuser.
- Šviesos diodų ilgaamžiškumas: The long-life LEDs are rated for 80% lumen maintenance at 60,000 hours, meaning they are designed for extended operation without requiring frequent replacement.
8. Problemų sprendimas
If you experience issues with your LED Troffer Light, refer to the following common troubleshooting steps:
- Šviesa neįsijungia:
- Patikrinkite grandinės pertraukiklį, kad įsitikintumėte, jog į įrenginį tiekiama elektra.
- Patikrinkite, ar visos elektros jungtys yra tvirtos ir tinkamai sujungtos.
- Įsitikinkite, kad sieninis jungiklis yra „ĮJUNGTA“ padėtyje.
- Šviesa netikėtai mirksi arba pritemsta:
- Confirm the fixture is connected to a compatible 0-10V dimmer if dimming is intended. Incompatible dimmers can cause flickering.
- Patikrinkite, ar nėra laisvų laidų jungčių.
- Sumažintas šviesos srautas:
- Ensure the diffuser is clean and free from dust or debris.
- Verify the dimmer setting is not set too low, if applicable.
Jei šie veiksmai neišsprendžia problemos, susisiekite su klientų aptarnavimo tarnyba.
9. Specifikacijos
| Funkcija | Specifikacija |
|---|---|
| Prekės ženklas | Lithonia apšvietimas |
| Modelio pavadinimas | BLT serija |
| Dalies numeris | 2BLT4 40L ADP LP840 |
| Gaminio matmenys | 47.75 colio ilgio x 23.75 colių pločio x 2.38 colio aukščio |
| Prekės svoris | 17 svaro |
| Šviesos šaltinio tipas | LED |
| Spalvos temperatūra | 4000 kelvinų (šalta balta) |
| Ryškumas | 4000 liumenų |
| Vattage | 34 vatų |
| ttage | 120-277 Volts (MVOLT) |
| Pritemdomas | Yes (0-10V dimming to 10%) |
| Diegimo tipas | Recessed (Drop Ceiling) |
| Medžiaga | Alloy Steel (Housing) |
| Atspalvio medžiaga | Akrilas |
| Apdailos tipas | Dengtas milteliniu būdu |
| Naudojimas viduje / lauke | Vidinis |
| Atsparumo vandeniui lygis | Water Resistant (Damp Vietos įvertinimas) |
| Sertifikatai | CSA Certified, IC Rated |
10. Garantija
This Lithonia Lighting BLT Series LED Troffer Light is backed by a 7-year limited warranty. For detailed warranty terms and conditions, please refer to the official Lithonia Lighting warranty documentation or contact customer support.
11. Pagalba klientams
For technical assistance, troubleshooting, or warranty inquiries, please contact Lithonia Lighting customer support. Refer to the product packaging or the official Lithonia Lighting websvetainė, kurioje pateikiama naujausia kontaktinė informacija.
