Lithonia Lighting BLT Series 2x4 LED Troffer Light Instruction Manual

1. Įvadas

The Lithonia Lighting BLT Series 2x4 Low Profile LED Troffer is designed to provide efficient and uniform illumination for various indoor commercial applications. This manual outlines the necessary steps for safe installation, proper operation, and routine maintenance of your LED troffer light. Please read all instructions carefully before proceeding with installation or use.

Figure 1: Lithonia Lighting BLT Series 2x4 LED Troffer Light.

2. Saugos informacija

ĮSPĖJIMAS: Elektros smūgio pavojus. Prieš montuodami ar atlikdami techninę priežiūrą, atjunkite maitinimą.

All wiring should be performed by a qualified electrician in accordance with national and local electrical codes.
Įsitikinkite, kad armatūra yra tinkamai įžeminta, kad išvengtumėte galimų elektros pavojų.
Do not alter or modify the fixture. Any modifications may void the warranty and create safety risks.
Handle the fixture with care to prevent damage to electrical components or the diffuser.
This fixture is intended for indoor use in damp-location rated and IC rated environments.

3. Pakuotės turinys

Prieš pradėdami diegti, patikrinkite, ar yra visi komponentai:

1 x Lithonia Lighting BLT Series 2x4 LED Troffer Light
Installation Hardware (Integral T-bar clips)

4. Specifikacijos

Modelio numeris	2BLT4 40L ADP LP835
Matmenys (I x P x A)	47-3/4" x 23-3/4" x 2-3/8"
Šviesos išvestis	4000 liumenų
Spalvos temperatūra	3500K Neutrali balta
ttage	MVOLT (120-277V)
Pritemdymas	0–10 V (pritemsta iki 10 %)
Medžiaga	Metal housing, Impact-modified acrylic diffuser
Sertifikatai	Damp-location rated, IC rated, CSA Certified
Svoris	17 svaro
Garantija	5 metų ribota garantija

Dimensions of the BLT Series LED Troffer Light — Figure 2: Detailed dimensions of the BLT Series 2x4 LED Troffer Light.

5. Montavimas

The BLT Series LED Troffer is designed for easy installation in standard drop ceilings. Its shallow 2-3/8" depth accommodates restrictive plenum settings.

Paruoškite montavimo vietą: Ensure the power supply to the installation area is turned off at the circuit breaker. Clear any obstructions in the ceiling grid where the fixture will be installed.
Įrenginio padėtis: Carefully lift the LED troffer into the ceiling grid opening. The end plates feature integral T-bar clips designed for secure attachment to the T-grid.
Apsaugokite armatūrą: Engage the T-bar clips to firmly hold the luminaire in place within the ceiling grid.
Laidų jungtys: Access the wiring compartment. Connect the fixture's electrical wires to the building's power supply wires (line, neutral, and ground) according to local electrical codes. For dimming functionality, connect the 0-10V dimming wires to a compatible dimming control system.
Close Wiring Compartment: Ensure all wiring connections are secure and properly insulated. Close the wiring compartment cover.
Atkurti maitinimą: Baigus montavimą ir patikrinus visas jungtis, atkurkite elektros tiekimą automatiniu jungikliu.

LED Troffer Light installed in a ceiling grid — 3 paveikslas: buvęsample of the LED troffer light installed in a ceiling grid.

Diegimo vaizdo įrašas

Video 1: Official product video demonstrating the features and installation of the BLT Series Low Profile LED Drop in Ceiling Light.

6. Naudojimo instrukcijos

The Lithonia Lighting BLT Series LED Troffer provides instant-on illumination upon power activation. For models equipped with dimming capabilities:

Pritemdymo valdymas: This fixture is compatible with 0-10V dimming systems, allowing you to adjust the light output down to 10% of its full brightness. Connect the fixture to a compatible 0-10V dimmer switch (sold separately) for variable light control.
Įjungimo / išjungimo valdymas: Use a standard wall switch to turn the light fixture on or off.

Classroom illuminated by LED troffer lights — 4 pav. Pvzample of a classroom setting effectively illuminated by BLT Series LED Troffer Lights.

7. Priežiūra

The BLT Series LED Troffer Light is designed for minimal maintenance due to its long-life LED technology.

Valymas: To maintain optimal light output and appearance, periodically clean the acrylic diffuser with a soft, damp cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the diffuser material.
Nėra vartotojo aptarnaujamų dalių: The LED components and driver are integrated into the fixture. There are no user-serviceable parts inside. Do not attempt to open or repair the fixture, as this will void the warranty and could lead to electrical hazards.

8. Problemų sprendimas

If you encounter issues with your LED troffer light, refer to the following common troubleshooting steps:

Problema	Galima priežastis	Sprendimas
Šviesa neįsijungia	Nėra maitinimo šaltinio; Atsilaisvinę laidai; Sugedęs jungiklis	Check circuit breaker; Verify all wiring connections are secure; Test the wall switch.
Light flickers or dims improperly	Incompatible dimmer; Loose dimming wires	Ensure a compatible 0-10V dimmer is used; Check dimming wire connections.
Sumažintas šviesos srautas	Dirty diffuser	Difuzorių valykite minkšta,amp audinys.

Jei problema išlieka ir išbandžius šiuos sprendimus, susisiekite su klientų aptarnavimo tarnyba.

9. Garantija ir palaikymas

This Lithonia Lighting BLT Series 2x4 LED Troffer Light is backed by a 5-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.

For warranty claims, technical assistance, or any questions regarding your product, please contact Lithonia Lighting customer service. Keep your proof of purchase for warranty validation.

For more information, visit the official Lithonia Lighting website or refer to the product's packaging.

	Lithonia 2BLT Series 2'x4' Volumetric Recessed LED Luminaire - Specifications and Ordering Guide Detailed specifications, features, and ordering information for the Lithonia 2BLT Series 2'x4' volumetric recessed LED luminaire. Discover its construction, optics, electrical capabilities, control options, and performance data for commercial lighting applications.
	Lithonia Lighting 2BLT4 Series: Volumetric Recessed LED Luminaires for Commercial Spaces Explore the Lithonia Lighting 2BLT4 series, a versatile volumetric recessed LED luminaire designed for commercial applications. Featuring high efficacy, advanced controls like nLight®, and multiple diffuser options, the 2BLT4 offers energy savings and optimal illumination for offices, schools, and retail environments.
	„Lithonia Lighting STACK LED Center Element Troffer“: savybės, specifikacijos ir valdymas Išsami informacija apie „Lithonia Lighting STACK LED Center Element Troffer“, apimanti jo savybes, konstrukciją, montavimą, elektros specifikacijas, optiką, sąrašus, garantiją, užsakymo galimybes, integruotus valdiklius („nLight“, „SensorSwitch“), priedus, fotometrinius duomenis ir našumo duomenis, skirtus komerciniam ir vidaus naudojimui.
	„Lithonia Lighting“ 2GTL serijos LED įleidžiamas šviestuvas – gaminio specifikacijos ir užsakymas Susipažinkite su „Lithonia Lighting 2GTL“ serijos 2'x4' LED įleidžiamuoju šviestuvu. Šiame dokumente išsamiai aprašomos šio energiją taupančio apšvietimo sprendimo, tinkančio komercinėms ir institucinėms reikmėms, savybės, specifikacijos, užsakymo informacija, našumo duomenys ir fotometriniai duomenys.
	„Lithonia Lighting LDN6SQ“ 6 colių LED kvadratinio įleidžiamojo šviestuvo specifikacijos Išsamios „Lithonia Lighting LDN6SQ“ 6 colių LED kvadratinio šviestuvo techninės specifikacijos, įskaitant savybes, konstrukciją, optiką, elektros informaciją, veikimo duomenis, užsakymo informaciją, matmenis ir suderinamas valdymo sistemas.
	Lithonia Lighting 2GTL 2'x4' LED Recessed Troffer Specification Sheet Detailed specifications, features, ordering information, performance data, and photometry for the Lithonia Lighting 2GTL 2'x4' LED Recessed Troffer, a commercial indoor lighting solution.

Lithonia Lighting 2BLT4 40L ADP LP835