MOOER UK Gold 900 Micro Preamp (M002) Naudojimo instrukcija

Pagrindinės savybės

• High-quality dual-channel preamp.
• Independent 3-band EQ (Treble, Mid, Bass) for each channel.
• Nepriklausomas stiprinimo ir garsumo valdymas kiekvienam kanalui.
• Switchable speaker cabinet simulation.
• Two footswitch operating modes: On/Off or Channel A/B switching.
• Compact and durable metal housing.

Valdikliai ir jungtys

Vaizdas: priekis view of the MOOER UK Gold 900 Micro Preamp, showing the control knobs and footswitch.

• TRE (Treble) Knob: Reguliuoja aukšto dažnio atsaką.
• MID (Middle) Knob: Reguliuoja vidutinio diapazono dažnių atsaką.
• BASS rankenėlė: Reguliuoja žemo dažnio atsaką.
• GAIN rankenėlė: Controls the amount of overdrive/distortion.
• VOL (garsumo) rankenėlė: Koreguoja bendrą išvesties lygį.
• CH/CAB Button:
  • Press to switch between Channel A and Channel B.
  • Press and hold to toggle the speaker cabinet simulation on or off.
• Kojinis jungiklis: Activates or bypasses the preamp, or switches between channels depending on the selected mode.
• Įvesties lizdas: Prijunkite gitarą ar kitą instrumentą.
• Išvesties lizdas: Prisijunkite prie an ampkeltuvas, maišytuvas arba garso sąsaja.
• DC 9V maitinimo įvestis: Connect a 9V DC power adapter (center negative, 300mA minimum).

Vaizdas: Galinis view of the MOOER UK Gold 900 Micro Preamp, showing the 9V DC power input.

Vaizdas: Šoninė view of the MOOER UK Gold 900 Micro Preamp, illustrating the input and output jacks.

Sąranka

1. Maitinimo jungtis: Connect a 9V DC power adapter (center negative, 300mA minimum) to the DC 9V input jack on the rear of the unit. Ensure the power supply meets these specifications to prevent damage.
2. Instrumento prijungimas: Connect your guitar or other instrument to the INPUT jack on the right side of the preamp naudojant standartinį 1/4 colio instrumentinį kabelį.
3. Išvesties jungtis: Connect the OUTPUT jack on the left side of the preamp į tavo amplifier's input, effects loop return, or an audio interface/mixer.
4. Pradiniai nustatymai: Before powering on, set all control knobs (TRE, MID, BASS, GAIN, VOL) to their minimum positions to avoid sudden loud sounds.
5. Maitinimas: Once all connections are secure, apply power to the unit. The LED indicator will illuminate.

Naudojimo instrukcijos

Kanalo pasirinkimas

The UK Gold 900 features two channels, A and B, each with independent EQ, Gain, and Volume settings.

• To switch channels: Briefly press the CH/CAB button. The LED color will change to indicate the active channel (e.g., green for Channel A, red for Channel B).

Speaker Cabinet Simulation

Išankstinisamp includes an integrated speaker cabinet simulation, which is useful for direct recording or connecting to a PA system.

• To toggle cabinet simulation: Press and hold the CH/CAB button for approximately 2 seconds. The LED will flash to indicate the change.

Kojinio jungiklio režimai

The footswitch can operate in two different modes:

1. Įjungimo / išjungimo režimas: In this mode, the footswitch acts as a bypass, turning the preamp efektas įjungtas arba išjungtas.
2. Channel A/B Mode: In this mode, the footswitch switches between Channel A and Channel B.

Refer to the product's full manual or manufacturer's website for instructions on how to switch between these footswitch modes, as this functionality is typically configured via a hidden switch or specific power-up sequence.

Tono reguliavimas

Adjust the following controls to shape your sound:

• GAUTIS: Increase for more overdrive and distortion. Decrease for cleaner tones.
• VOL: Sureguliuokite bendrą išvesties garsumą.
• TRE, MID, BASS: Use these three knobs to fine-tune the equalization for your desired tone.

Priežiūra

• Valymas: Įrenginiui valyti naudokite minkštą, sausą šluostę. Nenaudokite skystų valiklių ar tirpiklių.
• Saugykla: Laikykite išankstinįamp sausoje aplinkoje, atokiau nuo ekstremalių temperatūrų ir tiesioginių saulės spindulių.
• Maitinimas: Always use the specified 9V DC (center negative) power supply. Incorrect power can damage the unit.
• Jungtys: Ensure all cables are securely connected but do not overtighten. Disconnect cables when the unit is not in use for extended periods.

Trikčių šalinimas

• Nėra garso:
  • Patikrinkite visas kabelių jungtis (įvesties, išvesties, maitinimo).
  • Įsitikinkite, kad maitinimo šaltinis yra tinkamai prijungtas ir veikia.
  • Verify that the volume knobs on the preamp ir tavo amplifier are not set to zero.
  • Test with different cables and instruments to rule out faulty equipment.
• Undesired Noise/Buzz:
  • Ensure you are using a regulated 9V DC (center negative) power supply. Unregulated or incorrect power supplies can introduce noise.
  • Check for ground loops by trying different power outlets or isolating the power supply.
  • Reduce gain settings if the noise is excessive distortion.
  • Įsitikinkite, kad visi kabeliai yra ekranuoti ir geros būklės.
• Kojinis jungiklis nereaguoja:
  • Įsitikinkite, kad įrenginys įjungtas.
  • If the footswitch mode is set to Channel A/B, it will not bypass the effect.

Specifikacijos

Garantija ir palaikymas

For warranty information and technical support, please refer to the official MOOER website or contact your authorized MOOER dealer. Keep your purchase receipt as proof of purchase for warranty claims.

MOOER Official Websvetainė: www.mooeraudio.com