RXWLKJ 10-LED Motion Sensor Under Cabinet Light

Įvadas

Thank you for choosing the RXWLKJ 10-LED Motion Sensor Under Cabinet Light. This portable, wireless LED light is designed to provide convenient illumination in various areas such as closets, cabinets, drawers, and stairways. Featuring a built-in motion sensor and a rechargeable battery, it offers both automatic and continuous lighting modes for enhanced usability.

Produktas baigtasview

Pagrindinės funkcijos:

• Trijų krypčių jungiklis: Easily switch between ON (continuous lighting), OFF, and G (motion-sensor mode).
• Super Bright & Rechargeable: Equipped with 10 SMD 2835 LEDs and a built-in 850mAh polymer lithium battery.
• Judesio jutiklis: Automatically detects human motion within 10ft/120° and turns off after approximately 20 seconds of no movement.
• Magnetinis montavimas: Features a built-in magnet for easy attachment to iron surfaces. Includes a sheet iron and sticky tape for non-iron surfaces, allowing the light to be easily removed for charging or use as a hand-held light.
• Universalios programos: Ideal for closets, drawers, cabinets, and other dark areas requiring temporary or continuous light.

Pakuotės turinys:

• 1x RXWLKJ LED Light
• 1x Micro USB kabelis
• 1x Sheet Iron
• 4x Sticky Tapes

1 pav. Pakuotės turinys

Sąranka

Pradinis įkrovimas:

Before first use, fully charge the LED light using the provided Micro USB cable. The charging indicator light will typically change color (e.g., red to green) when fully charged.

Figure 2: Charging and Component Overview

Montavimas:

The RXWLKJ LED light features a built-in magnet for easy installation. No drilling or extra switches are required.

1. For Iron Surfaces: Simply attach the light directly to any ironwork. The built-in magnet will hold it in place.
2. For Non-Iron Surfaces: Use the provided sheet iron and sticky tapes.
• Peel the backing from one side of the sticky tape and attach it to the sheet iron.
• Peel the backing from the other side of the sticky tape and firmly press the sheet iron onto the desired clean, dry surface.
• Attach the LED light magnetically to the installed sheet iron. This allows for easy removal of the light for charging or portable use.

3 pav.: Paprastas montavimas

Naudojimo instrukcijos

The light features a three-way switch located at one end for mode selection:

• ĮJUNGTA: Continuously lighting mode. The light will stay on until manually switched off or to motion sensor mode.
• IŠJUNGTA: Šviesa visiškai išjungta.
• G (Motion Sensor Mode): The light will automatically turn on when human motion is detected within its range (approximately 10ft/120°) in a dark environment. It will turn off after about 20 seconds of no movement.

Figure 4: Switch Settings

Priežiūra

Baterijos įkrovimas:

When the light dims or stops functioning, it indicates a low battery. Remove the light from its magnetic mount and connect it to a 5V, 500mA (or 1000mA) USB power source using the Micro USB cable. The indicator light will show charging status.

Baterijos veikimo trukmės pratęsimas:

If the product is not in use for an extended period, charge it at least once a month to maintain battery health and extend its lifespan.

Trikčių šalinimas

• Light not turning on in motion sensor mode: Ensure the switch is set to 'G' mode. Check if the environment is dark enough, as the sensor may not activate in bright conditions. Verify the battery is charged.
• Light not staying on in ON mode: Ensure the switch is set to 'ON' mode. Check if the battery is fully charged.
• Trumpas baterijos veikimo laikas: Ensure the light is fully charged. Frequent activation in high-traffic areas or continuous 'ON' mode will deplete the battery faster. Consider charging monthly if not in regular use.
• Light falling from mounting: Ensure the mounting surface is clean and dry before applying sticky tape. For non-iron surfaces, ensure the sheet iron is securely attached.

Specifikacijos

Saugos informacija

• Šis produktas yra nėra atsparus vandeniui. Do not use it in damp places or expose it to water.
• Nebandykite ardyti ar modifikuoti gaminio, nes tai gali panaikinti garantiją ir kelti pavojų saugumui.
• Laikyti vaikams nepasiekiamoje vietoje.

Garantija ir palaikymas

Šis produktas tiekiamas su a 2 metų gamintojo garantija. For any questions, concerns, or support needs, please contact RXWLKJ customer service through your purchase platform.