1. Įvadas
The Fortinet FortiSwitch 224E is a high-performance Layer 2/3 Ethernet switch designed to provide secure, scalable, and manageable network access. It is an integral component of the Fortinet Security Fabric, offering seamless integration and unified management through the FortiGate interface via FortiLink. This manual provides essential information for the proper installation, configuration, operation, and maintenance of your FortiSwitch 224E.
Please read this manual thoroughly before operating the device to ensure optimal performance and to prevent damage.
2. Produktas baigtasview
2.1 Pagrindinės savybės
- 2/3 sluoksnio perjungimas: Supports advanced routing capabilities for enhanced network flexibility.
- 24 GE RJ45 prievadai: Provides high-density Gigabit Ethernet connectivity for various devices.
- 4 GE SFP prievadai: Offers fiber connectivity for long-distance links and uplink aggregation.
- „FortiGate“ jungiklio valdiklio suderinamumas: Enables seamless integration with FortiGate devices for centralized, unified management via FortiLink.
- Universalus diegimas: Ideal for enterprise networks, branch offices, and data center environments.
2.2 Pakuotės turinys
Patikrinkite, ar jūsų pakuotėje yra šie elementai:
- FortiSwitch 224E Unit
- AC Power Cord(s)
- Rack-mount Kit (brackets and screws)
- Greitos pradžios vadovas
- Saugos informacijos lapas
2.3 Priekinis ir galinis skydai Views
2.3.1 vaizdas: Priekyje ir gale view of the FortiSwitch 224E. The front panel features 24 RJ45 ports, 4 SFP ports, and status LEDs. The rear panel includes the console port and dual AC power inputs.
2.3.2 vaizdas: Išsamus view of the FortiSwitch 224E front panel, showing the 24 Gigabit Ethernet RJ45 ports (labeled 1-24), 4 Gigabit Ethernet SFP ports (labeled 25/26 and 27/28), and various status indicators (Power, Alarm, MGMT, CONSOLE).
2.3.3 vaizdas: Išsamus view of the FortiSwitch 224E rear panel, featuring the RJ45 console port for local management and two AC power input receptacles (100-240Vac, 50-60Hz).
3. Saugos informacija
Kad išvengtumėte sužalojimų ir įrenginio pažeidimų, laikykitės šių saugos priemonių:
- Galia: Use only the power cord(s) supplied with the device or approved replacements. Ensure the power source voltage matches the device's requirements (100-240Vac, 50-60Hz).
- Įžeminimas: Visada prijunkite įrenginį prie įžeminto maitinimo lizdo.
- Vėdinimas: Ensure adequate airflow around the device. Do not block ventilation openings. Maintain proper clearance for air intake and exhaust.
- Aplinka: Operate the device within the specified temperature and humidity ranges (Operating: 0-50°C, 10-90% non-condensing humidity). Avoid direct sunlight, heat sources, and excessive moisture.
- Montavimas: Install the device on a stable, level surface or securely mount it in a standard 19-inch equipment rack.
- Aptarnavimas: Nebandykite patys taisyti įrenginio. Visus techninės priežiūros darbus patikėkite kvalifikuotam personalui.
4. Sąranka ir diegimas
4.1 Svetainės paruošimas
Before installation, ensure the installation site meets the environmental requirements outlined in the Safety Information and Specifications sections. Provide adequate space for cabling and ventilation.
4.2 Jungiklio montavimas
The FortiSwitch 224E can be installed in a standard 19-inch equipment rack or placed on a desktop.
4.2.1 Montavimas ant stovo
- Attach the provided rack-mount brackets to the sides of the FortiSwitch using the included screws.
- Align the brackets with the vertical rails of the equipment rack.
- Secure the FortiSwitch to the rack using appropriate rack screws (not always included).
4.2.2 Darbastalio išdėstymas
If not rack-mounting, place the FortiSwitch on a flat, stable surface. Ensure there is sufficient space around the device for proper ventilation.
4.3 Maitinimo prijungimas
- Connect the supplied AC power cord(s) to the AC input receptacle(s) on the rear panel of the FortiSwitch.
- Plug the other end of the power cord(s) into a grounded electrical outlet.
- The switch will power on automatically. Verify the Power LED on the front panel illuminates.
4.4 Initial Console Connection
For initial configuration or troubleshooting, connect to the console port:
- Connect an RJ45-to-DB9 console cable (or USB-to-RJ45 adapter) from your management workstation to the CONSOLE port on the rear panel of the FortiSwitch.
- Konfigūruokite terminalo emuliacijos programinę įrangą (pvz., „PuTTY“, „Tera Term“) su šiais nustatymais: Baud Rate: 9600, Data Bits: 8, Parity: None, Stop Bits: 1, Flow Control: None.
- Paspauskite „Enter“, kad pasiektumėte komandinės eilutės sąsają (CLI).
5. Operacija
5.1 Tinklo įrenginių prijungimas
5.1.1 RJ45 prievadai
Connect Ethernet cables from your network devices (e.g., computers, servers, access points) to the 24 GE RJ45 ports on the front panel. The corresponding Link/Activity LEDs will illuminate when a valid connection is established and blink during data transmission.
5.1.2 SFP prievadai
Insert compatible Gigabit Ethernet SFP transceivers into the 4 GE SFP ports. Connect fiber optic cables from other network devices or uplinks to these transceivers. Ensure the correct fiber type (single-mode or multi-mode) is used for your transceivers and cables.
5.2 Valdymas ir konfigūravimas
The FortiSwitch 224E can be managed through several methods:
- FortiLink Integration (Recommended): For unified management, connect the FortiSwitch to a FortiGate firewall. The FortiGate acts as a switch controller, allowing you to manage the switch directly from the FortiGate's GUI. Refer to the FortiGate documentation for detailed FortiLink setup.
- Komandinės eilutės sąsaja (CLI): Access the CLI via the console port (as described in Section 4.4) or via SSH/Telnet over the network (after initial configuration). The CLI provides full control over all switch features.
- Webpagrįstas valdymas: The FortiSwitch may offer a web-based graphical user interface (GUI) for configuration. Access it by entering the switch's IP address into a web naršyklė.
6. Priežiūra
6.1 Firmware atnaujinimai
Reguliariai tikrinkite „Fortinet“ palaikymą website for the latest firmware versions. Keeping your FortiSwitch firmware up-to-date ensures optimal performance, security, and access to new features. Follow the instructions provided with the firmware release notes for the update process.
6.2 Valymas
Periodically clean the exterior of the switch with a soft, dry cloth. Do not use liquid or aerosol cleaners directly on the device. Ensure ventilation openings are free from dust and obstructions.
6.3 Aplinkos monitoringas
Ensure the operating environment remains within the specified temperature and humidity ranges to prevent overheating and component damage.
7. Problemų sprendimas
7.1 Maitinimo problemos
- Nėra maitinimo šviesos diodo: Check if the power cord is securely connected to both the switch and the power outlet. Verify the power outlet is functional. Try a different power cord.
- Pavojaus šviesos diodas šviečia: This indicates a system fault. Consult the Fortinet documentation or support for specific alarm codes and resolutions.
7.2 Ryšio problemos
- Port Link/Activity LED Off: Ensure the Ethernet or fiber cable is securely connected at both ends. Verify the connected device is powered on and functioning correctly. Check cable integrity.
- Nėra prieigos prie tinklo: Verify IP configuration on the switch and connected devices. Check VLAN assignments if configured. Ensure FortiLink is properly established if managing via FortiGate.
7.3 Prieigos prie konsolės problemos
- Nėra išvesties konsolėje: Double-check the console cable connection. Verify the terminal emulation software settings (Baud Rate: 9600, Data Bits: 8, Parity: None, Stop Bits: 1, Flow Control: None). Try a different console cable or adapter.
8. Specifikacijos
8.1 vaizdas: Key performance and hardware specifications for the FortiSwitch 224E.
8.2 vaizdas: Comprehensive hardware and environmental specifications for the FortiSwitch 224E, including comparisons with other models.
8.3 vaizdas: Visual representation of the FortiSwitch 224E with its physical dimensions and weight.
| Funkcija | Specifikacija |
|---|---|
| Modelio numeris | FS-224E |
| Sąsajos tipas | RJ45 |
| Iš viso tinklo sąsajų | 24 GE RJ45 prievadai, 4 GE SFP prievadai |
| RJ-45 nuoseklusis konsolės prievadas | 1 |
| Perjungimo pajėgumas (dvipusis) | 56 Gbps |
| Paketų per sekundę (dvipusis) | 83 Mps |
| Atmintis | 512 MB DDR3 |
| Blykstė | 128 MB |
| Palaikomi VLAN | 4K |
| Tinklo delsa | <1 µs |
| Gaminio matmenys (IxPxH) | 15.5 x 12.4 x 4.3 colio (39.4 x 31.5 x 10.9 cm) |
| Prekės svoris | 4 svaro (1.81 kg) |
| Reikalinga galia | 100-240V kintamoji srovė, 50/60Hz |
| Maitinimo šaltinis | AC built-in |
| Darbinė temperatūra | 32–122 °F (0–50 °C) |
| Laikymo temperatūra | –4–158 °F (–20–70 °C) |
| Drėgmė | 10-90% nekondensuojantis |
| Air-Flow Direction | Side-to-back |
| Sertifikatai | FCC, CE, RCM, VCCI, BSMI, UL, CB, RoHS2 |
9. Garantija ir palaikymas
9.1 Gaminio garantija
The FortiSwitch 224E comes with a Ribota viso gyvenimo garantija. For detailed terms and conditions of the warranty, please refer to the official Fortinet websvetainėje arba prie jūsų gaminio pridėtoje garantijos dokumentacijoje.
9.2 Techninė pagalba
For technical assistance, documentation, firmware downloads, and other support resources, please visit the official Fortinet support websvetainė:
You may need to register your product to access full support services.
