„Klip Xtreme KPM-300“ vieno monitoriaus stalo laikiklio naudojimo instrukcija

1. Įvadas

This manual provides detailed instructions for the installation, operation, and maintenance of your Klip Xtreme KPM-300 Single Monitor Desk Mount. This mount is designed to support a single monitor, allowing for adjustable positioning to enhance ergonomic comfort and reclaim desktop space. It is compatible with screens ranging from 13 to 32 inches and weighing up to 17.6 lbs (8 kg).

The KPM-300 features a sturdy C-clamp base for secure attachment to a desk or table edge, and also supports grommet mounting. Its fully articulating arm allows for tilt, swivel, and rotation adjustments, providing flexibility in viewing angles. Integrated cable management clips help maintain an organized workspace.

2. Saugos informacija

• Svorio talpa: Do not exceed the maximum weight capacity of 17.6 lbs (8 kg). Overloading may result in instability and potential damage or injury.
• Ekrano dydis: This mount is designed for monitors between 13 and 32 inches. Ensure your monitor falls within this range.
• VESA suderinamumas: Verify that your monitor has VESA mounting patterns of 75x75mm or 100x100mm. Attempting to mount a non-compatible monitor may cause damage.
• Stalo storis: Ensure your desk surface is strong enough to support the combined weight of the mount and monitor. For C-clamp installation, the desk thickness must be within the specified range (refer to specifications).
• Saugus montavimas: Ensure all screws and bolts are securely tightened before use. Periodically check for tightness.
• Surinkimas: Follow all assembly instructions carefully. If you encounter difficulties, seek professional assistance.
• Judančios dalys: Be aware of pinch points when adjusting the mount. Keep hands clear of moving parts.

3. Pakuotės turinys

Prieš tęsdami montavimą, patikrinkite, ar visi komponentai yra ir nepažeisti.

• Monitoriaus svirties mazgas
• Stalo stulpas
• C-Clamp Bazė
• Žiedinio tvirtinimo komponentai
• VESA plokštė
• Hardware Kit (various screws, washers, Allen keys)
• Kabelių valdymo spaustukai

1 paveikslas: Baigėsiview of the Klip Xtreme KPM-300 monitor desk mount, showing the articulating arm, pole, and C-clamp base. Small inset circles indicate both C-clamp and grommet mounting options are available.

4. Sąranka ir diegimas

4.1 Choose Mounting Method

The KPM-300 supports two installation methods: C-clamp arba žiedinį tvirtinimą. Pasirinkite jūsų stalui tinkamiausią būdą.

4.1.1 C-Clamp Montavimas

1. Pritvirtinkite C-clamp base to the bottom of the desk pole.
2. Position the assembled clamp and pole at the desired location on your desk edge.
3. Priveržkite C-clamp varžtą, kol laikiklis bus tvirtai pritvirtintas prie stalo. Įsitikinkite, kad jis stabilus ir nesvyruoja.

4.1.2 Žiedinio tvirtinimo montavimas

1. If your desk has an existing grommet hole, remove the cover. If not, drill a hole of appropriate diameter (refer to specifications for hole size).
2. Insert the grommet bolt through the desk hole.
3. Attach the grommet plate and nut from underneath the desk, tightening until the mount is secure.

2 paveikslas: Galinis view of the monitor mount's pole and C-clamp mechanism, illustrating how it attaches to the edge of a desk. This image highlights the stability provided by the clamp.

4.2 Assemble Arm and Attach to Pole

1. Slide the monitor arm assembly onto the desk pole.
2. Adjust the arm to the desired height and secure it using the provided locking mechanism or screw.

4.3 Prie monitoriaus pritvirtinkite VESA plokštę

1. Remove the VESA plate from the monitor arm by loosening the quick-release screw.
2. Sulygiuokite VESA plokštę su tvirtinimo angomis monitoriaus gale.
3. Using the appropriate screws and washers from the hardware kit, securely attach the VESA plate to your monitor. Do not overtighten.

3 paveikslas: Išsamią view of the articulating joint on the monitor arm and the VESA mounting plate. This illustrates the connection point for the monitor and the flexibility of the arm's movement.

4.4 Mount Monitor to Arm

1. Carefully slide the monitor (with the attached VESA plate) onto the monitor arm's VESA bracket.
2. Ensure the monitor is fully seated and secure the quick-release screw to lock it in place.

4.5 Kabelių valdymas

Utilize the integrated cable management clips along the arm and pole to route your monitor cables neatly. This helps to reduce clutter and maintain a clean workspace.

4 paveikslas: Kampinis view of the fully assembled monitor desk mount, showing the pole, articulating arm, and VESA plate ready to receive a monitor. This image provides a perspective of the mount's overall structure.

5. Valdymas ir reguliavimas

The KPM-300 offers various adjustment options to customize your viewpatirtis:

• Aukščio reguliavimas: Loosen the locking mechanism on the pole to slide the arm up or down to your desired height. Re-tighten to secure.
• Pakreipimo reguliavimas: The monitor can be tilted +45° to -45° (90° total range) to reduce glare and optimize viewing angles. Loosen the tilt knob on the VESA plate, adjust, and re-tighten.
• Sukimosi reguliavimas: The arm can swivel +90° to -90° (180° total range) at the pole and arm joints, allowing you to share your screen or change viewkryptimi.
• Sukimosi reguliavimas: The VESA plate allows for 360° rotation, enabling you to switch your monitor between landscape and portrait orientations without removing it.
• Įtempimo reguliavimas: Each joint can be tightened or loosened individually using the provided Allen keys. Adjust the tension to achieve the desired fluidity or stability of movement for your monitor's weight.

6. Priežiūra

• Valymas: Laikiklį valykite minkšta šluoste,amp šluoste. Venkite abrazyvinių valiklių ar tirpiklių, kurie gali pažeisti apdailą.
• Periodiniai patikrinimai: Periodiškai patikrinkite visus varžtus, veržles ir tvirtinimo detalesamp mechanisms to ensure they remain tight and secure. Re-tighten as necessary to maintain stability.
• Tepimas: No lubrication is typically required for the moving parts. If movement becomes stiff, check for debris or overtightened joints.

7. Problemų sprendimas

7.1 Monitor Sags or Does Not Hold Position

• Check Weight: Ensure your monitor's weight does not exceed the maximum capacity of 17.6 lbs (8 kg).
• Įtempimo reguliavimas: Use the provided Allen keys to tighten the tension screws at the articulating joints, particularly the tilt and swivel points, until the monitor holds its position.

7.2 Mount is Unstable or Wobbles

• Secure Clamp/Grommet: Priveržkite C formos jungtįamp or grommet bolt to ensure the base is firmly attached to the desk.
• Desk Stability: Ensure your desk itself is stable and not prone to wobbling.
• Stulpo jungtis: Verify that the arm assembly is securely fastened to the pole.

7.3 Difficulty Attaching Monitor to VESA Plate

• VESA suderinamumas: Double-check that your monitor's VESA pattern is 75x75mm or 100x100mm.
• Varžto ilgis: Ensure you are using the correct length screws from the hardware kit. Screws that are too long can damage the monitor; too short will not secure it.

8. Specifikacijos

9. Garantija ir palaikymas

The Klip Xtreme KPM-300 Monitor Desk Mount comes with a Visą gyvenimą trunkanti garantija. For warranty claims or technical support, please refer to the contact information provided with your purchase documentation or visit the official Klip Xtreme websvetainę.