1. Įvadas
The Utilitech 0302325 Candelabra Light Control is designed to automate your incandescent lighting. This device features a dusk-to-dawn sensor, which automatically turns candelabra-based incandescent bulbs on when it gets dark and off when it becomes light. It is suitable for both indoor and outdoor applications, providing convenience and energy efficiency.
2. Saugos informacija
Please read and understand all instructions before installing or operating this product. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- ĮSPĖJIMAS: Elektros smūgio pavojus. Prieš montuodami ar atlikdami techninę priežiūrą, atjunkite maitinimą saugiklių dėžutėje arba grandinės pertraukiklyje.
- This device is designed for use with incandescent bulbs only, up to 60W. Do not exceed the maximum wattage.
- Ensure the light control is installed in a location where it is protected from direct water spray if used outdoors, although it is water resistant.
- Nebandykite modifikuoti ar taisyti įrenginio. Visus techninės priežiūros darbus patikėkite kvalifikuotiems specialistams.
- Saugoti nuo vaikų.
3. Pakuotės turinys
Prieš montuodami patikrinkite, ar yra visi komponentai:
- Utilitech 0302325 Candelabra Light Control (Quantity may vary based on purchase pack)
- Naudojimo vadovas (šis dokumentas)
4. Sąranka ir diegimas
The Utilitech 0302325 Candelabra Light Control features a simple screw-in installation process.
- Išjunkite maitinimą: Before beginning installation, ensure the power to the light fixture is turned off at the circuit breaker or fuse box.
- Pašalinti esamą lemputę: Carefully remove the existing candelabra-based incandescent bulb from the fixture.
- Screw in Light Control: Screw the Utilitech 0302325 Candelabra Light Control into the empty candelabra socket. Ensure it is securely tightened.
- Įdiekite lemputę: Screw your candelabra-based incandescent bulb (up to 60W) into the socket on the Utilitech light control.
- Padėties nustatymas: For optimal performance, ensure the sensor on the light control is not obstructed and can detect ambient light levels accurately. Avoid positioning it where artificial light sources (e.g., other lamps, streetlights) might directly shine on the sensor, as this could interfere with its operation.
- Atkurti maitinimą: Once the light control and bulb are securely installed, restore power to the fixture at the circuit breaker or fuse box.
Figure 1: Utilitech 0302325 Candelabra Light Control. This image shows the bronze-colored light control unit, designed to screw into a candelabra socket, with a bulb then screwing into the control unit itself.
5. Operacija
The Utilitech 0302325 Candelabra Light Control operates automatically based on ambient light levels.
- Funkcionalumas nuo sutemų iki aušros: The integrated sensor detects when natural light levels fall below a certain threshold (dusk) and automatically turns on the connected incandescent bulb.
- Automatinis išsijungimas: When natural light levels rise above the threshold (dawn), the sensor will automatically turn off the connected bulb.
- No manual adjustment or programming is required for its basic operation.
6. Priežiūra
The Utilitech 0302325 Candelabra Light Control requires minimal maintenance.
- Valymas: Periodically wipe the exterior of the light control with a soft, dry cloth to remove dust or debris. Do not use abrasive cleaners or solvents. Ensure the sensor area remains clean for accurate light detection.
- Lemputės keitimas: When the incandescent bulb needs replacement, ensure power is turned off at the circuit breaker before unscrewing the old bulb and installing a new one.
- There are no user-serviceable parts inside the light control unit.
7. Problemų sprendimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Šviesa neįsijungia sutemus. |
|
|
| Šviesa auštant neišsijungia. |
|
|
| Bulb shines at reduced brightness. |
|
|
8. Specifikacijos
| Funkcija | Detalė |
|---|---|
| Modelio numeris | 0302325 (Part Number: 43497-23210) |
| Prekės ženklas | Utilitech |
| Tipas | Dusk-to-dawn Candelabra Light Control |
| Diegimo tipas | Įsukimas |
| Lempučių tipų suderinamumas | Incandescent (Candelabra-based) |
| Maksimali galiatage | 60 vatų |
| ttage | 120 voltų |
| Naudojimas viduje / lauke | Viduje, Lauke |
| Medžiaga | Plastikiniai |
| Spalva / apdaila | Bronza |
| Saugos sąrašas | ETL įtrauktas į sąrašą |
| Prekės svoris | 1.76 uncijos (apie 0.11 svaro) |
| Matmenys (paketas) | 6.6 x 3.4 x 1 colio |
9. Garantija ir palaikymas
Specific warranty information for the Utilitech 0302325 Candelabra Light Control is typically provided with the product packaging or can be obtained from the retailer at the time of purchase. Please retain your proof of purchase for warranty claims.
For technical support or further assistance, please contact Utilitech customer service or refer to the official Utilitech websvetainė kontaktinei informacijai. Visit Utilitech.com
