CYCPLUS U10

CYCPLUS USB ANT+ atmintuko adapterio U1 naudotojo vadovas

Modelis: U10

1. Produktas baigtasview

The CYCPLUS USB ANT+ Stick Dongle Adapter U1 is a wireless receiver designed to bridge the gap between traditional bike trainers and modern cycling software. It receives ANT+ wireless radio signals from various sensors and translates them into a USB protocol, enabling seamless integration with popular training applications. This device is essential for indoor cycling enthusiasts looking to enhance their virtual training experience.

CYCPLUS USB ANT+ Stick Dongle Adapter, front view

1 paveikslas: Priekyje view of the CYCPLUS USB ANT+ Stick Dongle Adapter. This compact device features a standard USB-A connector on one end and the ANT+ receiver module on the other, designed for easy plug-and-play functionality with computers.

2. Sąrankos vadovas

Setting up your CYCPLUS USB ANT+ Stick Dongle Adapter is straightforward.

  1. Sistemos suderinamumas: Ensure your computer runs on a compatible operating system. The U1 dongle is designed for use with PC/Laptop running Windows or macOS. Please note: This device is not compatible with Android or iPhone mobile devices.
  2. Prijunkite adapterio laikiklį: Insert the USB ANT+ stick into an available USB port on your desktop or laptop computer.
  3. Tvarkyklės diegimas: In most cases, the required drivers will install automatically upon connecting the device to your computer. If automatic installation does not occur, or if you encounter any driver-related issues, please contact CYCPLUS customer service for assistance.
  4. Optimali vieta: For best performance, position the dongle within 3 meters (approximately 10 feet) of your ANT+ sensors (e.g., bike trainer, heart rate monitor, speed/cadence sensors). The maximum effective range is 5 meters.
CYCPLUS USB ANT+ Stick Dongle Adapter, side view showing USB connector

2 paveikslas: Šoninė view of the CYCPLUS USB ANT+ Stick Dongle Adapter, highlighting the USB connector. This view demonstrates its compact design, making it easy to plug into any standard USB port.

3. Naudojimo instrukcijos

Once the ANT+ dongle is successfully set up, you can begin using it with your preferred cycling applications.

  • Programinės įrangos suderinamumas: The CYCPLUS U1 dongle is compatible with popular indoor cycling software platforms, including Zwift, TheSufferfest, TrainerRoad, and Rouvy.
  • Sensor Data Collection: The dongle is designed to collect various sensor data via the ANT+ wireless protocol. This includes:
    • Cadence sensors
    • Greičio jutikliai
    • Heart rate monitors
    • Galios matuokliai
    Ensure your sensors are ANT+ compatible and properly paired within your cycling application.
  • Channel Support: The dongle supports 8 ANT+ channels, allowing it to connect to multiple sensors simultaneously.
  • Using with Cycling Software:
    1. Launch your chosen cycling application (e.g., Zwift).
    2. Navigate to the device pairing or sensor connection section within the application.
    3. The application should detect the ANT+ dongle and then allow you to search for and connect to your ANT+ enabled sensors.
    4. Follow the on-screen prompts within the application to complete the pairing process for each sensor.

4. Priežiūra

The CYCPLUS USB ANT+ Stick Dongle Adapter U1 requires minimal maintenance to ensure its longevity and optimal performance.

  • Valymas: Gently wipe the exterior of the dongle with a soft, dry cloth to remove dust or debris. Avoid using liquid cleaners or abrasive materials.
  • Saugykla: When not in use, store the dongle in a dry, cool place, away from direct sunlight and extreme temperatures. Protect the USB connector from damage.
  • Tvarkymas: Handle the dongle with care. Avoid dropping it or subjecting it to strong impacts, which could damage internal components.

5. Problemų sprendimas

If you encounter issues with your CYCPLUS USB ANT+ Stick Dongle Adapter, refer to the following common troubleshooting steps:

ProblemaGalima priežastisSprendimas
Dongle not recognized by computer.
  • Atsilaisvinusi USB jungtis.
  • Tvarkyklė neįdiegta arba sugadinta.
  • Sugedęs USB prievadas.
  • Ensure the dongle is firmly inserted into the USB port.
  • Išbandykite kitą kompiuterio USB prievadą.
  • Check Device Manager (Windows) or System Information (macOS) for driver status. If needed, contact customer service for driver support.
  • Iš naujo paleiskite kompiuterį.
Sensors not connecting or frequently disconnecting.
  • Dongle too far from sensors.
  • Trikdžiai iš kitų belaidžių įrenginių.
  • Sensor battery low.
  • Incorrect sensor pairing in software.
  • Software-specific ANT+ protocol issues (e.g., Wahoo Kickr protocol vs. ANT FEC).
  • Move the dongle closer to your sensors (ideally within 3 meters).
  • Minimize other wireless devices (Wi-Fi routers, Bluetooth devices) near the dongle during use.
  • Replace batteries in your ANT+ sensors.
  • Ensure correct sensors are selected and paired within your cycling application.
  • If using a Wahoo trainer, try switching to ANT FEC protocol in your software settings if available.
Dongle not working with Android/iPhone.Nesuderinamumas.The CYCPLUS U1 dongle is designed for Windows and macOS computers only and is not compatible with Android or iPhone devices.

6. Specifikacijos

FunkcijaDetalė
Prekės ženklasCYCPLUS
Modelio numerisU10
SpalvaBlack (U1 Stick)
MedžiagaABS
Matmenys (I x P x A)18.5 mm x 14.5 mm x 6 mm (0.72 x 0.57 x 0.24 colio)
Prekės svoris1.7g (0.06oz) / 0.634 ounces (packaged)
Belaidis protokolas2.4Ghz ANT+ wireless communications protocol
Diapazonas5 meters (Best performance within 3 meters)
Kanalo numeris8
Techninės įrangos sąsajaUSB
Duomenų nuorodos protokolasUSB
Duomenų perdavimo sparta3 megabitų per sekundę
Suderinamos operacinės sistemosWindows, macOS
Palaikoma programinė įrangaZwift, TheSufferfest, TrainerRoad, Rouvy

7. Garantija ir palaikymas

CYCPLUS is committed to providing high-quality products and excellent customer service.

  • Garantija: All CYCPLUS products, including the USB ANT+ Stick Dongle Adapter U1, come with a two-year warranty and full lifetime service.
  • Klientų aptarnavimas: If you have any questions, require technical assistance, or encounter any issues not covered in this manual, please do not hesitate to contact CYCPLUS customer service. We are always ready to assist you.

Susiję dokumentai - U10

Preview „Cycplus U10 ANT+“ USB adapterio naudotojo vadovas ir specifikacijos
Išsamus „Cycplus U10 ANT+“ USB adapterio naudotojo vadovas, kuriame aprašomos jo funkcijos, numatytas naudojimas, saugos gairės, techninės specifikacijos, atitiktis aplinkosaugos reikalavimams ir ES atitikties deklaracija. Idealiai tinka dviračių treniruokliams ir įrenginiams belaidžiu būdu sujungti.
Preview CYCPLUS T3 Smart Bike Trainer vartotojo vadovas
User manual for the CYCPLUS T3 Smart Bike Trainer, covering setup, installation, usage, and specifications. Learn how to connect your bike, understand working modes, and troubleshoot common issues.
Preview CYCPLUS T3 Smart Bike Trainer vartotojo vadovas
Comprehensive user manual for the CYCPLUS T3 Smart Bike Trainer, covering setup, installation, operation, and specifications. Learn how to connect your bike, use the CYCPLUS app, and troubleshoot common issues.
Preview Išmaniojo dviračio treniruoklio CYCPLUS T2H naudotojo vadovas
Comprehensive user manual for the CYCPLUS T2H Smart Bike Trainer, covering unboxing, installation, setup, working modes, application usage, troubleshooting, and specifications.
Preview CYCPLUS T2 Smart Bike Trainer vartotojo vadovas
Išmaniojo dviračio treniruoklio „CYCPLUS T2“ naudotojo vadovas, kuriame aprašomas sąranka, įrengimas, darbo režimai, taikymas ir specifikacijos.
Preview Išmaniojo dviračio treniruoklio CYCPLUS R200 naudotojo vadovas
This user manual provides instructions for the CYCPLUS R200 Smart Bike Trainer, covering unboxing, installation, setup, and specifications. Learn how to connect your bike, use different modes, and troubleshoot common issues.