Technomate TM-RF HD IR HDMI RF Modulator User Manual

1. Įvadas

The Technomate TM-RF HD IR is an advanced HDMI RF Modulator designed to convert an HDMI signal into a DVB-T compatible RF signal. This allows you to distribute high-definition 1080p video and audio over existing coaxial cable systems to multiple televisions. This model features 9V Infra-Red (IR) control over the coaxial cable, enabling remote control of your source device from other rooms, and an HDMI loop-through for local viewing.

This manual provides detailed instructions for the installation, operation, and maintenance of your TM-RF HD IR modulator. Please read this manual thoroughly before use to ensure proper setup and optimal performance.

2. Saugos informacija

Please observe the following safety precautions to prevent damage to the device and ensure your safety:

• Maitinimas: Naudokite tik pateiktą maitinimo adapterį. Įsitikinkite, kad maitinimo lizdo įtampa atitinkatage requirements of the adapter.
• Vėdinimas: Neužblokuokite ventiliacijos angų. Užtikrinkite pakankamą oro cirkuliaciją aplink įrenginį, kad jis neperkaistų.
• Vanduo ir drėgmė: Do not expose the device to water, moisture, or excessive humidity. Do not operate with wet hands.
• Valymas: Prieš valydami atjunkite maitinimą. Naudokite minkštą, sausą šluostę. Nenaudokite skystų ar aerozolinių valiklių.
• Vieta: Place the device on a stable, flat surface. Avoid placing it near heat sources, direct sunlight, or in areas with high vibration.
• Aptarnavimas: Nemėginkite patys aptarnauti šio gaminio. Visą techninę priežiūrą patikėkite kvalifikuotam aptarnavimo personalui.
• Kabeliai: Įsitikinkite, kad visi laidai yra tvirtai prijungti ir nėra suspausti ar pažeisti.

3. Pakuotės turinys

Patikrinkite, ar pakuotėje yra visi toliau išvardyti daiktai:

• Technomate TM-RF HD IR Modulator Unit
• IR Transmitter Cable
• IR Receiver ("Magic Eye")
• Maitinimo adapteris
• Vartotojo vadovas (šis dokumentas)

4. Produktas baigtasview

4.1. Priekinis skydelis

1 pav.: priekis View of TM-RF HD IR Modulator

The front panel features a green LCD display for status and menu navigation, along with directional buttons (Up, Down, Left, Right), an OK button for selection, and a MENU button to access settings.

• LCD ekranas: Shows current channel, settings, and menu options.
• Naršymo mygtukai: Naudojamas naršyti meniu ir koreguoti nustatymus.
• Gerai mygtukas: Patvirtina pasirinkimus.
• MENIU mygtukas: Enters and exits the main menu.

4.2. Galinis skydelis

2 pav.: galinis View of TM-RF HD IR Modulator Ports

The rear panel provides all necessary connection ports for input, output, and control.

• IR OUT: Connects the IR Transmitter cable.
• 9V IR OFF/ON Switch: Enables or disables the 9V power for the IR system over the coaxial cable.
• RF OUT: Connects to your TV's antenna input or RF distribution system.
• RF IN: For cascading multiple modulators or connecting an existing RF signal.
• HDMI OUT (Loop-through): Connects to a local TV or display for direct HDMI viewing.
• HDMI IN: Connects to your HDMI source device (e.g., satellite receiver, Blu-ray player).
• SERVICE PORT (USB): Used for firmware updates or configuration file pervedimai.
• 12V DC: Maitinimo įvestis pridedamam maitinimo adapteriui.

4.3. IR Receiver ("Magic Eye")

Figure 3: IR Receiver ("Magic Eye")

The IR Receiver is connected to the coaxial cable at the remote TV location and receives IR signals from your remote control, sending them back to the modulator to control the source device.

5. Sąrankos instrukcijos

Follow these steps for initial setup of your TM-RF HD IR modulator:

5.1. Pagrindinis ryšys

1. Prijunkite HDMI šaltinį: Connect an HDMI cable from your source device (e.g., satellite receiver, Blu-ray player, CCTV system) to the HDMI-IN port on the TM-RF HD IR modulator.
2. Connect to TV (RF): Prijunkite koaksialinį kabelį nuo RF OUT port of the modulator to the antenna/RF input of your television.
3. Connect to Local TV (HDMI Loop-through - Optional): Jei norite view the source locally via HDMI, connect an HDMI cable from the HDMI OUT port of the modulator to an HDMI input on your local TV.
4. Connect IR Transmitter: Plug the IR Transmitter cable into the IR OUT port on the modulator. Position the small IR emitter head directly in front of the IR sensor of your HDMI source device.
5. Maitinimas: Prijunkite pateiktą maitinimo adapterį prie 12V DC input on the modulator and then plug it into a power outlet. The modulator will power on.
6. Ieškoti kanalų: On your television, perform an automatic channel scan (or manual scan for DVB-T/UHF channels). The modulator's output will appear as a new digital channel.

5.2. IR Control Setup for Remote TVs

To enable IR control from a remote television:

1. Užtikrinti, 9V IR OFF/ON switch on the rear of the modulator is set to ON.
2. At the remote TV location, connect the IR Receiver ("Magic Eye") to the coaxial cable coming from the modulator. This typically involves connecting the coaxial cable to the IR Receiver, and then the IR Receiver to the TV's antenna input.
3. Point your source device's remote control at the IR Receiver to control the source device connected to the modulator.

Note: For multiple remote TVs with IR control, a mains-powered bypass amplifier/splitter (e.g., Technomate TM-AMP B models) is required to send the 9V IR signal to all locations. Additional IR Receivers ("Magic Eyes") may be needed.

5.3. Connecting to Existing RF Systems

If you have an existing RF distribution system, you can integrate the TM-RF HD IR:

• Connect your existing RF signal (e.g., from an antenna or another modulator) to the RF IN port of the TM-RF HD IR.
• The modulator will combine its output with the incoming RF signal and send the combined signal out through the RF OUT uostas.
• Ensure the output channel of the TM-RF HD IR does not conflict with existing channels in your system. Adjust the output channel via the modulator's menu if necessary.

5.4. Cascading Multiple Modulators

Up to 35 TM-RF HD IR units can be cascaded in one system to distribute multiple HDMI sources:

1. Prijunkite RF OUT of the first modulator to the RF IN of the second modulator.
2. Continue this chain for all modulators. The final modulator's RF OUT connects to your main RF distribution system or TV.
3. Ensure each modulator is set to a unique output channel to avoid interference.
4. For easier configuration of multiple units, you can use the USB Aptarnavimo uostas to upload and download settings. Refer to the "Operating Instructions" section for details.

6. Naudojimo instrukcijos

6.1. Pagrindinis Viewing

Once connected and your TV has scanned for channels, simply select the channel assigned to the TM-RF HD IR modulator on your television to view the HDMI source content.

6.2. Using the On-Screen Menu (LCD Display)

The front panel LCD and buttons allow you to configure various settings:

1. Paspauskite MENIU mygtuką, kad patektumėte į pagrindinį meniu.
2. Naudokite Aukštyn/Žemyn naršymo mygtukai, skirti slinkti per meniu parinktis.
3. Paspauskite OK , kad pasirinktumėte parinktį arba atidarytumėte submeniu.
4. Naudokite Kairė/dešinė buttons to adjust values or settings.
5. Paspauskite MENIU again to exit the current menu or save changes (if prompted).

Key configurable settings include:

• Išvesties kanalas: Select the UHF channel for the RF output (Channels 21-69).
• Pralaidumas: Configure 6 MHz, 7 MHz, or 8 MHz.
• Constellation, FEC, ONID, LCN: Advanced DVB-T parameters for specific system requirements.
• Video/Audio Settings: Adjust encoding parameters if necessary.

6.3. USB Configuration (Advanced)

The SERVICE PORT (USB) allows for advanced configuration and firmware updates:

• You can upload configuration data from the modulator to a USB device.
• Edit these settings on a PC using compatible software (contact Technomate Support for details).
• Download the modified settings back to the modulator via the USB port. This is particularly useful for configuring multiple units with identical or similar settings.

7. Priežiūra

The Technomate TM-RF HD IR modulator requires minimal maintenance:

• Valymas: Disconnect the power adapter before cleaning. Use a soft, dry, lint-free cloth to wipe the exterior of the unit. Do not use liquid cleaners, aerosols, or abrasive materials.
• Vėdinimas: Ensure that the ventilation holes are not obstructed by dust or debris. Periodically check and clean if necessary.
• Saugykla: Jei prietaisą ketinate laikyti ilgą laiką, atjunkite jį nuo maitinimo šaltinio ir laikykite vėsioje, sausoje vietoje, apsaugotoje nuo tiesioginių saulės spindulių ir ekstremalių temperatūrų.

8. Problemų sprendimas

If you encounter issues with your TM-RF HD IR modulator, refer to the following common problems and solutions:

No Picture or Sound on TV

• Patikrinkite galią: Ensure the modulator is powered on and the power adapter is securely connected.
• HDMI jungtis: Verify the HDMI cable from your source device is securely connected to the HDMI-IN uostas.
• RF ryšys: Ensure the coaxial cable from RF OUT is securely connected to your TV's antenna input.
• TV Channel Scan: Perform a new channel scan on your TV. Ensure your TV is set to the correct input (Antenna/RF).
• Suderinamumas su televizoriumi: The TM-RF HD IR only works with 1080p Full HD & 4K UHD TVs. If your TV is 720p HD Ready, it will not work directly. You may need a Freeview HD box (DVB-T2 box) connected between the modulator and your HD Ready TV.
• Output Channel Conflict: If using with an existing RF system, ensure the modulator's output channel does not conflict with other active channels. Adjust the modulator's output channel via its menu.

IR valdymas neveikia

• 9V IR Switch: Užtikrinti, 9V IR OFF/ON switch on the modulator's rear panel is set to ON.
• IR Transmitter Placement: Verify the IR emitter head is directly in front of the IR sensor of your source device.
• IR imtuvo prijungimas: Ensure the IR Receiver ("Magic Eye") is properly connected to the coaxial cable at the remote TV location.
• Apeiti Amplifier (for multiple TVs): If using multiple remote TVs, confirm you are using a mains-powered bypass amplifier/splitter that supports 9V IR signal pass-through.
• Nuotolinio valdymo pulto baterijos: Check the batteries in your source device's remote control.

Lip Sync Issues (Audio/Video Out of Sync)

• The TM-RF HD IR is designed for minimal delay. If you experience lip sync issues, ensure your source device and TV are functioning correctly.
• Try restarting both the modulator and the source device.
• If issues persist, contact Technomate Support for further assistance.

Poor Picture Quality / Signal Interference

• Kabelio kokybė: Use high-quality coaxial and HDMI cables.
• Kabelio ilgis: Excessive cable length can degrade signal quality.
• Kanalų trukdžiai: If you have other RF signals, try changing the output channel of the modulator to an unused frequency.
• Signalo stiprumas: For long cable runs or multiple TVs, a signal ampgali prireikti keltuvo.

9. Specifikacijos

10. Garantija ir palaikymas

For warranty information, please refer to the documentation provided with your purchase or visit the official Technomate website. If you encounter any issues not covered in this manual or require further assistance, please contact Technomate Support.

When contacting support, please have your product model number (TM-RF HD IR) and a detailed description of the issue ready.

Contact information for Technomate Support can typically be found on their official websvetainėje arba ant jūsų produkto pakuotės.